Hi Mark, I was hoping to not spend more money on sound diver to get it to work. Thanks, Rich

Hello all Well it's actually an info (I didn't found about it here) : I come back to SoundDiver and my Korg WS EX and 05R/W that I used a lot long time ago when I was still under MacOS 8 and I had a Promix instead of a 01X. So I'm now under MacOS 10.3.7 on a PB G4 with the last Auto Connector (greatly improved !). I just had some test with SoundDiver (3.1.0 pub beta 2) and with an amt8 Logic, a MT4 Logic and also the 01X as MIDI interface. When the 01X is connected, whatever the interface I use, I have the same sysex error problems which don't exist when the 01X is not connected. I drove the SoundDiver MIDI interface test which indicates not working properly interfaces (all 3 of them) and something about plug 4 (don't remember exactly). I imagine these problems may be reliable with the continuous sysex communication between the Mac and the 01X ? Happy New Year to everybody here ;-) Powerbook G4 1GHz, 768 MHz RAM, ext DD LaCie 160 Gg FW, 80 Gg USB2, 20 Gg Fw, Logic Pro 6.4 & 7, MacOS 10.3.7, SoundDiver 3.1.0 public beta 2 01X (mLan), amt 8, mt4, EMI 6/2m Korg WS EX, Korg 05R/W, Alesis QS6, Peavey PC 1600X, Yamaha G50, Boss GX700, Alesis Midiverb 3 & 4. -- Gérald Ryckeboer ryckeboerg@... http://ryckeboerg.free.fr

Hi, so far I figured out that on my new system there is no midi action (no light blinkin) on the unitor when I try to use the sounddiver. Nothing can get loaded. Switched over to the old system on my 2nd PCit works fine. So I think it is a unitor midi problem in my new pc and configuration. Still get the text message when I open sounddiver or unitor control. any solutions ? and how will sounddiver be supported in 2005 or is it all over for pc user ? Any help deeply welcome, thank you in advance !!!!! P --- In sounddiver-users@yahoogroups.com, "paolosbox" <paolosbox@y...> wrote: > > Hi folks, > thanks to Richard, but I worked his advice already and I didn´t > helped at all. I created a lot of preferences for my songs and on my > old pc they load all time with no problem. > If I copy them in to the preferences folder of the new pc system and > try to upload, the screen shows me the right set up and then it > starts requesting midi datas > until hang up > No chance to interrrupt, only program kill. > I even changed some preferences on my old pc and loaded, no prob on > the old sys, try to load on new sys > hang up again. > > On top of things I can´t get the untior installed, neither autoscan > or manually added. Same with some other stuff, like JD 990 aso. > > If I plug into my old system automatic scan and manual works fine, > like the rest. So obviously it is nothing outside of the pc. > > So at the end of the line, I think it is a sounddivercode that messes > up by being installed on a high end xp ht 800 pc (config below posted) > > So I tried to call the German Hotline, guess what? > No more support for sounddiver from the 1st of January 20005 > Hotline dead and now ? Only Mac on Mac-Hotline, so what ? > > I´m thinking, how many user are upgrding to a new system, like me, > wow. > > That is really bad custumer treatment. > > Any coder or developer still around ? > It must be a way to figure out what makes sd go off on new ht > systems, please. > > Don´t let us down, bad enough emagic did > > Any help is very welcome, thanks > > I´ll provide the drinks :-)) > > > --- In sounddiver-users@yahoogroups.com, "subliminalwarrior2000" > <subliminalwarriors@d...> wrote: > > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" > > <paolosbox@y...> wrote: > > > > > > Same messed up situation here. > > > > > > Had a working system: > > > Intel P4 1,8 Asus P4 266 E Win 98 SE > > > Soundiver 3.502 > > > Unitor 3.504 > > > > > > No Problems at all. > > > > > > Then I installed new System & PC: > > > Intel P4 3,2 E Asus P4C 800 Deluxe XP Home SP 2 > > > Soundiver 3.502 > > > Unitor 3.504 Driver 2.27 > > > > > > Soundiver Problems: > > > - loads non of my preferences/presets > > > - tries to receive midi datas forever > hang up > > > - can´t install Unitor > > > - can´t perform automatic scanning > recognizes only 1 device > > end > > > > > > Spent 12 hours testing all offered solution so far no clue. > > > > > > Is there a solution ? > > > > > > Please answer > > > > Howdy Paolo > > > > This is a common problem that can be fixed easily. > > > > First delete your sounddiver preference files then > > > > In sounddiver goto "Options/Settings/Midi interface > > Communications/Communication" > > and deselect "Check Device Connections at Startup" > > > > This will stop SD hanging and loading wrong preference settings. > > > > As for the Unitor i have had no luck with this adaptation so i dont > > bother with the Unitor in SD. I believe this is to set up midi > > interface setups for different performance routings. > > > > Would also not recommend auto scanning, tis safer to "add" the > model > > you want & enter the settings than SD doing it for you, tends to > get > > it wrong some of the time. > > > > Once it is set then save as a new preference file. > > > > Hope this helps > > > > Regards > > Richard

Hi, now I installed Unitor control 3.504 on my new pc and it scans the unitor fine, but if I try to scan unitor by sounddiver the system hangs, no scan possible. Compared to my old setup I realised that a line on the upper right side of the sd-window disappeared, where I was able to select between computer and patchbay. Finally after all testing I think it is something wrong in sounddiver on XP, not able recognizing the unitor. Since the untior is between computer and patchbay & all other external devices the unitor is blocking all possible setups. Is there nobody out there that is able to help, please ?? !! P --- In sounddiver-users@yahoogroups.com, "paolosbox" <paolosbox@y...> wrote: > > Hi, > so far I figured out that on my new system there is no midi action > (no light blinkin) on the unitor when I try to use the sounddiver. > Nothing can get loaded. > Switched over to the old system on my 2nd PCit works fine. > So I think it is a unitor midi problem in my new pc and configuration. > Still get the text message when I open sounddiver or unitor control. > any solutions ? > and how will sounddiver be supported in 2005 or is it all over for pc > user ? > > Any help deeply welcome, thank you in advance !!!!! > P > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" <paolosbox@y...> > wrote: > > > > Hi folks, > > thanks to Richard, but I worked his advice already and I didn´t > > helped at all. I created a lot of preferences for my songs and on > my > > old pc they load all time with no problem. > > If I copy them in to the preferences folder of the new pc system > and > > try to upload, the screen shows me the right set up and then it > > starts requesting midi datas > until hang up > > No chance to interrrupt, only program kill. > > I even changed some preferences on my old pc and loaded, no prob on > > the old sys, try to load on new sys > hang up again. > > > > On top of things I can´t get the untior installed, neither autoscan > > or manually added. Same with some other stuff, like JD 990 aso. > > > > If I plug into my old system automatic scan and manual works fine, > > like the rest. So obviously it is nothing outside of the pc. > > > > So at the end of the line, I think it is a sounddivercode that > messes > > up by being installed on a high end xp ht 800 pc (config below > posted) > > > > So I tried to call the German Hotline, guess what? > > No more support for sounddiver from the 1st of January 20005 > > Hotline dead and now ? Only Mac on Mac-Hotline, so what ? > > > > I´m thinking, how many user are upgrding to a new system, like me, > > wow. > > > > That is really bad custumer treatment. > > > > Any coder or developer still around ? > > It must be a way to figure out what makes sd go off on new ht > > systems, please. > > > > Don´t let us down, bad enough emagic did > > > > Any help is very welcome, thanks > > > > I´ll provide the drinks :-)) > > > > > > --- In sounddiver-users@yahoogroups.com, "subliminalwarrior2000" > > <subliminalwarriors@d...> wrote: > > > > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" > > > <paolosbox@y...> wrote: > > > > > > > > Same messed up situation here. > > > > > > > > Had a working system: > > > > Intel P4 1,8 Asus P4 266 E Win 98 SE > > > > Soundiver 3.502 > > > > Unitor 3.504 > > > > > > > > No Problems at all. > > > > > > > > Then I installed new System & PC: > > > > Intel P4 3,2 E Asus P4C 800 Deluxe XP Home SP 2 > > > > Soundiver 3.502 > > > > Unitor 3.504 Driver 2.27 > > > > > > > > Soundiver Problems: > > > > - loads non of my preferences/presets > > > > - tries to receive midi datas forever > hang up > > > > - can´t install Unitor > > > > - can´t perform automatic scanning > recognizes only 1 device > > > end > > > > > > > > Spent 12 hours testing all offered solution so far no clue. > > > > > > > > Is there a solution ? > > > > > > > > Please answer > > > > > > Howdy Paolo > > > > > > This is a common problem that can be fixed easily. > > > > > > First delete your sounddiver preference files then > > > > > > In sounddiver goto "Options/Settings/Midi interface > > > Communications/Communication" > > > and deselect "Check Device Connections at Startup" > > > > > > This will stop SD hanging and loading wrong preference settings. > > > > > > As for the Unitor i have had no luck with this adaptation so i > dont > > > bother with the Unitor in SD. I believe this is to set up midi > > > interface setups for different performance routings. > > > > > > Would also not recommend auto scanning, tis safer to "add" the > > model > > > you want & enter the settings than SD doing it for you, tends to > > get > > > it wrong some of the time. > > > > > > Once it is set then save as a new preference file. > > > > > > Hope this helps > > > > > > Regards > > > Richard

I am unable to upload my patches/combis/performances into SD. Also, the amt8 doesnt load at all. I realize this is a beta but are these known issues being worked on already?

HI, I finally got rid of my problem: After fighting for weeks, I discovered the new emagic infoweb for users. I signed in after 2 days I received a password. Solution is found under : Type in at : search : (above left) ID: xKB0001654x and ID: xKB0000475x This will help. Make sure you´ll access now emagic infoweb because it is also time limited til october 2005. --- In sounddiver-users@yahoogroups.com, "paolosbox" <paolosbox@y...> wrote: > > Hi, > now I installed Unitor control 3.504 on my new pc and it scans the > unitor fine, but if I try to scan unitor by sounddiver the system > hangs, no scan possible. > Compared to my old setup I realised that a line on the upper right > side of the sd-window disappeared, where I was able to select between > computer and patchbay. > Finally after all testing I think it is something wrong in sounddiver > on XP, not able recognizing the unitor. Since the untior is between > computer and patchbay & all other external devices the unitor is > blocking all possible setups. > > Is there nobody out there that is able to help, please ?? !! > P > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" <paolosbox@y...> > wrote: > > > > Hi, > > so far I figured out that on my new system there is no midi action > > (no light blinkin) on the unitor when I try to use the sounddiver. > > Nothing can get loaded. > > Switched over to the old system on my 2nd PCit works fine. > > So I think it is a unitor midi problem in my new pc and > configuration. > > Still get the text message when I open sounddiver or unitor control. > > any solutions ? > > and how will sounddiver be supported in 2005 or is it all over for > pc > > user ? > > > > Any help deeply welcome, thank you in advance !!!!! > > P > > > > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" > <paolosbox@y...> > > wrote: > > > > > > Hi folks, > > > thanks to Richard, but I worked his advice already and I didn´t > > > helped at all. I created a lot of preferences for my songs and on > > my > > > old pc they load all time with no problem. > > > If I copy them in to the preferences folder of the new pc system > > and > > > try to upload, the screen shows me the right set up and then it > > > starts requesting midi datas > until hang up > > > No chance to interrrupt, only program kill. > > > I even changed some preferences on my old pc and loaded, no prob > on > > > the old sys, try to load on new sys > hang up again. > > > > > > On top of things I can´t get the untior installed, neither > autoscan > > > or manually added. Same with some other stuff, like JD 990 aso. > > > > > > If I plug into my old system automatic scan and manual works > fine, > > > like the rest. So obviously it is nothing outside of the pc. > > > > > > So at the end of the line, I think it is a sounddivercode that > > messes > > > up by being installed on a high end xp ht 800 pc (config below > > posted) > > > > > > So I tried to call the German Hotline, guess what? > > > No more support for sounddiver from the 1st of January 20005 > > > Hotline dead and now ? Only Mac on Mac-Hotline, so what ? > > > > > > I´m thinking, how many user are upgrding to a new system, like > me, > > > wow. > > > > > > That is really bad custumer treatment. > > > > > > Any coder or developer still around ? > > > It must be a way to figure out what makes sd go off on new ht > > > systems, please. > > > > > > Don´t let us down, bad enough emagic did > > > > > > Any help is very welcome, thanks > > > > > > I´ll provide the drinks :-)) > > > > > > > > > --- In sounddiver- users@yahoogroups.com, "subliminalwarrior2000" > > > <subliminalwarriors@d...> wrote: > > > > > > > > --- In sounddiver-users@yahoogroups.com, "paolosbox" > > > > <paolosbox@y...> wrote: > > > > > > > > > > Same messed up situation here. > > > > > > > > > > Had a working system: > > > > > Intel P4 1,8 Asus P4 266 E Win 98 SE > > > > > Soundiver 3.502 > > > > > Unitor 3.504 > > > > > > > > > > No Problems at all. > > > > > > > > > > Then I installed new System & PC: > > > > > Intel P4 3,2 E Asus P4C 800 Deluxe XP Home SP 2 > > > > > Soundiver 3.502 > > > > > Unitor 3.504 Driver 2.27 > > > > > > > > > > Soundiver Problems: > > > > > - loads non of my preferences/presets > > > > > - tries to receive midi datas forever > hang up > > > > > - can´t install Unitor > > > > > - can´t perform automatic scanning > recognizes only 1 device > > > > > end > > > > > > > > > > Spent 12 hours testing all offered solution so far no clue. > > > > > > > > > > Is there a solution ? > > > > > > > > > > Please answer > > > > > > > > Howdy Paolo > > > > > > > > This is a common problem that can be fixed easily. > > > > > > > > First delete your sounddiver preference files then > > > > > > > > In sounddiver goto "Options/Settings/Midi interface > > > > Communications/Communication" > > > > and deselect "Check Device Connections at Startup" > > > > > > > > This will stop SD hanging and loading wrong preference settings. > > > > > > > > As for the Unitor i have had no luck with this adaptation so i > > dont > > > > bother with the Unitor in SD. I believe this is to set up midi > > > > interface setups for different performance routings. > > > > > > > > Would also not recommend auto scanning, tis safer to "add" the > > > model > > > > you want & enter the settings than SD doing it for you, tends > to > > > get > > > > it wrong some of the time. > > > > > > > > Once it is set then save as a new preference file. > > > > > > > > Hope this helps > > > > > > > > Regards > > > > Richard

I recently have noticed a severe problem with my setup that was not happening before. I haven't been using SoundDiver for a long time and I recently found the need to do so. WHen I request memory from my proteus2k and try using the audition function to check out the diffrent programs from within SounDiver, the programs do not load up correctly. SounDiver is not sending all the appropriate info to the soundmodule so the patches are loading up without the actual sounds. When I scroll thru the menus in my p2k on the instrumenst panel showing what multisets are being used for the current patch its showing "not installed" meaning the sound rom requested its not there. This never happened before. Everything is the same version its always been and it worked before. I tried initializing the p2k with factory settings and nothing. I'm not sure whats the problem. I running SoundDiver 3.05 on WinXP Sp1. Any help will be much appreciated. Thanx!

Hi, I do I load a midi file and convert it to sounddiver format? I tried importing and opening the file in sounddiver - so I can save as....,all I get is a black page. Regards Alien

Greetings. I'm trying to use Sounddiver JV/XP with my JV-1010. Like many, I've had problems with the JV-1010's serial cable, and have given up on it. I'm trying to use an external MIDI interface instead. To that end, I bought a Tascam US-122 audio/midi interface. The problem is, both the Tascam and the JV-1010 have only one MIDI In port. The Tascam's MIDI Out needs to connect to the JV-1010's MIDI In and vice versa. This leaves nowhere for me to connect the MIDI Out from my keyboard. I thought using MIDI Thru ports would solve this problem, for example: (1) connecting the Tascam's MIDI Out to the keyboard's MIDI Thru; or (2) connecting the keyboard's MIDI Out to the JV-1010's MIDI Thru. These don't work -- when I play the keyboard, no MIDI data shows up on the Tascam. Does anyone have any suggestions as to different connections or different equipment? For example, do I need a multi-port MIDI interface that will accept MIDI Ins from both the keyboard and the JV-1010? Or a MIDI merge box? Thanks in advance for any responses.

Hey EMAGIC/APPLE, There are many of us SD users who can't seem to use SD with the latest Mac OS 10.3.7, but still have external midi instruments. What can we do? I am still dependent on my SD Libraries, but can't get to them anymore using this Beta version. Boe.

Greetings I am using SD 3.04 on PC. All is well. Looking after Triton rack, Waldorf MicroQ, Super Jupiter & Kawai K5000s. Am using midi ox to load an Andromeda as well as another editor for a Microkorg. Does anyone know of any adaptations floating around for these two? Can i just drop them into SD? Running the extra editors is not my ideal scenario. Any help appreciated. Regards Richard

For the moment, I did'nt noticed specific problems with MacOSX3.7. But perheaps am I really happy ; also I didn't had a very deep test : just basic stuff as capture synths settings, send to the synths, and open libraries but with 3 synths only. I didn't test with my other devices for the moment : Powerbook G4 1GHz, 768 Mo RAM, MacOSX3.7, SoundDiver 3.1.0 Beta 2 ; Emagic amt8 or mt4 MIDI interface, Korg Wavestation EX and 05R/W, Alesis QS6 for the synths. For sure, I never read about problems with SoundDiver for my machines … I had no problem with the previous beta version, but have you update to beta 2 ? I did'nt use the previous relase with MacOSX3.7, so perheraps … Le 17 janv. 05, à 17:27, "phunktek2001" <phunktek@...> a écrit : > Hey EMAGIC/APPLE, > There are many of us SD users who can't seem to use SD with the > latest Mac OS 10.3.7, but still have external midi instruments. What > can we do? I am still dependent on my SD Libraries, but can't get to > them anymore using this Beta version. > > Boe. > -- Gérald ryckeboerg@... http://ryckeboerg.free.fr

> I am completely disappointed by SoundDiver beta version for OSX. It > used to be very helpful under OS9. What Emapple wants to say with his behaviour about it is: get rid of all your hardware synths. the sooner the better! I don't see any other explanation. They are not going to spend anymore resources on it. > _______________________________________________________________________ > _ > Date: Mon, 17 Jan 2005 09:54:02 -0000 > From: "phunktek2001" <phunktek@...> > Subject: SD for OSX 3.7 > > > Hey EMAGIC/APPLE, > There are many of us SD users who can't seem to use SD with the > latest Mac OS 10.3.7, but still have external midi instruments. What > can we do? I am still dependent on my SD Libraries, but can't get to > them anymore using this Beta version. > > Boe. > > > _______________________________________________________________________ > _ Carlo Serafini http://www.seraph.it http://go.berkleemusic.com/seraph http://homepage.mac.com/carloserafini/

> Hey EMAGIC/APPLE, > There are many of us SD users who can't seem to use SD with the > latest Mac OS 10.3.7, but still have external midi instruments. What > can we do? I am still dependent on my SD Libraries, but can't get to > them anymore using this Beta version. > > Boe. Hi Boe, Just to let you know. SD is working fine here on X.3.7. What are the problems you speak of. Ofcourse, the underlying bugs that have been present since the introduction of the SD betas are still present, but it is definitely working here. Regards, Matt ____________________________________________________ MATT MCKENZIE-SMITH MUSIC • AUDIO DESIGN • PRODUCTION PO Box 10395, Adelaide 5000, South Australia. Ph.+61 416 197 883 goodaudiosense.com.au mattrixx.net _____________________________________________________ _____________________________________________________ MATT MCKENZIE-SMITH MUSIC • AUDIO DESIGN • PRODUCTION PO Box 10395, Adelaide 5000, South Australia. Ph.+61 416 197 883 goodaudiosense.com.au mattrixx.net _____________________________________________________

> Hi Boe, > Just to let you know. SD is working fine here on X.3.7. What are the > problems you speak of. Ofcourse, the underlying bugs that have been > present since the introduction of the SD betas are still present, but > it is definitely working here. > Regards, > Matt > > ____________________________________________________ > MATT MCKENZIE-SMITH > MUSIC • AUDIO DESIGN • PRODUCTION > PO Box 10395, Adelaide 5000, South Australia. > Ph.+61 416 197 883 > goodaudiosense.com.au > mattrixx.net > _____________________________________________________ > I have a brand new 2.5 with 10.3.7 - and no other apps except what the install dvd provided from apple - and SD does not work correctly. It doesnt load tr-rack entries, and might very well be the problem with my mac constantly crashing since i got it 2 weeks ago.

You will probably soon find out that one midi port is not sufficient for other reasons too. Maybe you'll get another module? Unless you want to use the audio capabilities of the Tascam the US-122 does not seem to be the ideal tool (mind you I do not have any experience with it, I'm just referring to the specs.) You should go for an extra midi interface either added to the US-122 or replacing it if you do not need the audio.. Cheers, Bob. Bob Lowen bob.lowen@... On 17 Jan 2005, at 00:59, dweinrau wrote: > > > > Greetings. I'm trying to use Sounddiver JV/XP with my JV-1010. Like > many, I've had problems with the JV-1010's serial cable, and have > given up on it. I'm trying to use an external MIDI interface instead. > > To that end, I bought a Tascam US-122 audio/midi interface. The > problem is, both the Tascam and the JV-1010 have only one MIDI In > port. The Tascam's MIDI Out needs to connect to the JV-1010's MIDI In > and vice versa. This leaves nowhere for me to connect the MIDI Out > from my keyboard. > > I thought using MIDI Thru ports would solve this problem, for example: > (1) connecting the Tascam's MIDI Out to the keyboard's MIDI Thru; or > (2) connecting the keyboard's MIDI Out to the JV-1010's MIDI Thru. > These don't work -- when I play the keyboard, no MIDI data shows up on > the Tascam. > > Does anyone have any suggestions as to different connections or > different equipment? For example, do I need a multi-port MIDI > interface that will accept MIDI Ins from both the keyboard and the > JV-1010? Or a MIDI merge box? > > Thanks in advance for any responses. > > > > > > > > > _________________________________________________________________ > SoundDiver Users Mailing List > - Read the list ad-free: > http://news.gmane.org/gmane.comp.audio.emagic.sounddiver > - Search the entire list archive: > http://search.gmane.org/?group=gmane.comp.audio.emagic.sounddiver > _________________________________________________________________ > > Yahoo! Groups Links > > > > > > >

Not loading Triton rack entries is an old problem. I have it on a Mac with OS 9.2.2. and SD 3 (.4 or something). It will e.g. load presets but not from expansion modules. Cheers, Bob. Bob Lowen bob.lowen@... On 18 Jan 2005, at 04:57, Bob Jones wrote: > > > >> Hi Boe, >> Just to let you know. SD is working fine here on X.3.7. What are the >> problems you speak of. Ofcourse, the underlying bugs that have been >> present since the introduction of the SD betas are still present, but >> it is definitely working here. >> Regards, >> Matt >> >> ____________________________________________________ >> MATT MCKENZIE-SMITH >> MUSIC • AUDIO DESIGN • PRODUCTION >> PO Box 10395, Adelaide 5000, South Australia. >> Ph.+61 416 197 883 >> goodaudiosense.com.au >> mattrixx.net >> _____________________________________________________ >> > > I have a brand new 2.5 with 10.3.7 - and no other apps except what the > install dvd > provided from apple - and SD does not work correctly. It doesnt load > tr-rack entries, and > might very well be the problem with my mac constantly crashing since i > got it 2 weeks > ago. > > > > > > _________________________________________________________________ > SoundDiver Users Mailing List > - Read the list ad-free: > http://news.gmane.org/gmane.comp.audio.emagic.sounddiver > - Search the entire list archive: > http://search.gmane.org/?group=gmane.comp.audio.emagic.sounddiver > _________________________________________________________________ > > Yahoo! Groups Links > > > > > > >

--- Alien Martian <alien1x@...> wrote: > > > Hi, > I do I load a midi file and convert it to sounddiver > format? > > I tried importing and opening the file in sounddiver > - > so I can save as....,all I get is a black page. > > Regards > Alien Firstly you install the instrument the patch file belongs to,you <edit> <select all> then under the File menu you <Import>. If the instrument is fully supported, the patch names will rapidly fill up.. Then You save to Library namned whatever you like, then when you close Sounddiver, the library writes the entries. Don't try to copy the library to a floppy or other media before Sounddiver closes as all you get is an empty file, which can cause offence.

> > I have a brand new 2.5 with 10.3.7 - and no other apps except what the > install dvd > provided from apple - and SD does not work correctly. It doesnt load > tr-rack entries, and > might very well be the problem with my mac constantly crashing since i > got it 2 weeks > ago. It may be a problem with the TR module. I know that I cannot access the flip menu in the TrinityPro module. It causes a full lock up. The workaround is to access an adjacent parameter and 'arrow' to the flip and use the +/- buttons to change the value. This has been present since the incarnation of the OSX version (and all since). I also have a problem with scanning and receiving patch names from equipment, however, this is not version specific, just another legacy bug that goes with the OSX. (all versions) I have had to settle with fiddling the timing of the 'dump reception' and limit myself to receiving in dumps of ten patches and then looking back to make sure there are none greyed out. Well, it seems that Emapples desire for me to use more software based synths might be working. However, when needed, I am able to get results from Diver, albeit in a long winded way. Regards, Matt _____________________________________________________ MATT MCKENZIE-SMITH MUSIC • AUDIO DESIGN • PRODUCTION PO Box 10395, Adelaide 5000, South Australia. Ph.+61 416 197 883 goodaudiosense.com.au mattrixx.net _____________________________________________________

I've dug out my Yamaha SY99 out of storage along with a copy of SoundDiver, version 2.01 for Windows still in the box. But my Master Diskette for licensing and getting it running is missing. Imagine my surprise to find out SoundDiver has been discontinued! But SoundDiver was the only editor that was good at handling the SY99. Any suggestions?

Hello, I own 2 full working Emagic AMT8. On Mac OS 9 , I have never had any problem to link the 2 devices with the link cable. On Mac OS 10.3.7, I can detect the first AMT8 but not the second. I use Logic Audio Pro 6.4.3 and the midi driver for the AMT8 version 3.1 (unitor driver) Is it a known bug? Strangely SD works without AMT8 but directly thru the utility of Apple:" Configuration audio et Midi" I skake everithing. Thanks in advancefor any help. Lucien PS: at the first look SD 3 beta works with Kawai K5000s Korg 03R Yam TG77 Yam FS1R Waldorf XT rack E-mu Proteus 2000 and Virtuoso (with multi partial dumps...)

Hi Lucian, Try pairing them via RS422 port (Mac serial) instead of RS232 (PC). Best, Andy > From: Lucien RONDAY <rondaylucien@...> > Reply-To: <sounddiver-users@yahoogroups.com> > Date: Mon, 24 Jan 2005 11:39:47 +0100 > To: <sounddiver-users@yahoogroups.com> > Subject: [SoundDiver] How can I link 2 Emagic AMT8 ? > > > Hello, > > I own 2 full working Emagic AMT8. > On Mac OS 9 , I have never had any problem to link the 2 devices with > the link cable. > On Mac OS 10.3.7, I can detect the first AMT8 but not the second. > I use Logic Audio Pro 6.4.3 and the midi driver for the AMT8 version > 3.1 (unitor driver) > Is it a known bug? > Strangely SD works without AMT8 but directly thru the utility of > Apple:" Configuration audio et Midi" > I skake everithing. > > Thanks in advancefor any help. > Lucien > > PS: at the first look SD 3 beta works with > Kawai K5000s > Korg 03R > Yam TG77 > Yam FS1R > Waldorf XT rack > E-mu Proteus 2000 and Virtuoso (with multi partial dumps...) > > > > _________________________________________________________________ > SoundDiver Users Mailing List > - Read the list ad-free: > http://news.gmane.org/gmane.comp.audio.emagic.sounddiver > - Search the entire list archive: > http://search.gmane.org/?group=gmane.comp.audio.emagic.sounddiver > _________________________________________________________________ > > Yahoo! Groups Links > > > > > > >

--- In sounddiver-users@yahoogroups.com, Lucien RONDAY <rondaylucien@s...> wrote: > Hello, > > I own 2 full working Emagic AMT8. > On Mac OS 9 , I have never had any problem to link the 2 devices with > the link cable. > On Mac OS 10.3.7, I can detect the first AMT8 but not the second. > I use Logic Audio Pro 6.4.3 and the midi driver for the AMT8 version > 3.1 (unitor driver) > Is it a known bug? > Strangely SD works without AMT8 but directly thru the utility of > Apple:" Configuration audio et Midi" > I skake everithing. > > Thanks in advancefor any help. > Lucien > Howdy Lucien I am running Unitor 8 & Amt8 on a PC. Dont know if this is a similar scenario but . . . I have Amt8 to puta via USB then Unitor 8 running either rs232 to rs422 (this allows you to keep daisy chaining more units later in the same fashion). For Mac i believe its rs422 to rs232. Then in your midi device settings your mac will only see 1 amt8 but you set this to 16 ports. Basically it will see one 16 port amt8. As i said im not too sure if this is the scenario on a mac but this is how my PC sees my two interfaces as one. Regards Richard

--- In sounddiver-users@yahoogroups.com, "j_meister" <j_meister@y...> wrote: > > > > I've dug out my Yamaha SY99 out of storage along with a copy of > SoundDiver, version 2.01 for Windows still in the box. But my Master > Diskette for licensing and getting it running is missing. > > Imagine my surprise to find out SoundDiver has been discontinued! But > SoundDiver was the only editor that was good at handling the SY99. > > Any suggestions? Howdy I would suggest getting your hands on a more recent release as the SY99 is still included. 3.05 is the last release for windows, you should be able to get a secondhand copy from ebay. Regards Richard

As I remember a couple years ago one gentleman informed us about coming QY-70 adaptation. Is it realy to wait?