Can anyone send me the VP-9000.ADA or post in the files area of this group? It comes with the new SD version... Thanks, Jan

I wouldn't count on it. In fact I wouldn't count on ed/librarians existing very much longer - have you tried NI's FM?! Beats the pants off my TX816 except I can't get anywhere near the same number of voices and I would miss the aliasing grunge and 12 bit convertor noise! It's also one tenth the price of a TX816 unit when they were new and is extremely portable! (and no batteries to pull and solder, and FM generates very little heat, and...) My point is that soft synths are definitely going to replace hardware - though it will take a while, it will happen and ed/librarians will be utterly irrelevant. In the mean time look how hard it is to upkeep SD? It's been, what 5 years since 3 and beta ever since 3.05! Don't mention Unisyn or Galaxy! > Sometimes what isn't said, can be more informative than what is. > > Given that MIDI librarian functionality is such a useful feature, I > highly doubt that Apple would let it languish in limbo. > > Rob > > > On Feb 16, 2004, at 5:34 AM, Michael Haydn wrote: > >> >> Am 14.02.2004 um 00:33 schrieb fotofono: >> >>> It acts as a plug-in in a host sequencer. >>> So I am asking Michael. >>> can this be done? >>> are there any plans for this? >>> do you consider it a good suggestion? >> >> Cheers, Steve Hilmy --- Steven Campbell Hilmy I c Æ r µ § ¤ ¥ µ n ¶ Â Washington DC

>>Given that MIDI librarian functionality is such a useful feature, I >>highly doubt that Apple would let it languish in limbo. >> >>Rob Maybe, maybe not. Maybe Apple don't want to make it easy for us to use our MIDI synths - maybe they'd rather sell AU$5000 computers more than they want to sell AU$600 (or whatever it used to cost) MIDI librarian software? Impulse reverbs, physical modeling softsynths (i.e. Sculpture when it's eventually released), etc. like lots of G5 CPU power. My guess is that if it were up to the guys at Emagic SoundDiver would be a happening thing, but I don't trust any big companies (i.e. Apple, not Emagic) to have any motivation other than profit.

On 2/23/04, S.C. da sleeve Hilmy put forth: >My point is that soft synths are definitely going to replace hardware - >though it will take a while, it will happen and ed/librarians will be >utterly irrelevant. I doubt that will happen. There is a huge market for new MIDI hardware, not to mention all the MIDI gear already out there. Hardware often sounds better (real analogue, dedicated DSP), has a better interface (designed specifically for itself), is more reliable (not dependent on software and hardware from other manufacturers), more universal (it avoids all of the AU, VST, RTAS stuff), easier to resell, and much more tangible ("look at my flashy new synth"). Musicians like the reality of something that they can physically play on their own. On 2/24/04, Bill Canty put forth: >Maybe, maybe not. Maybe Apple don't want to make it easy for us to use >our MIDI synths - maybe they'd rather sell AU$5000 computers more than >they want to sell AU$600 (or whatever it used to cost) MIDI librarian >software? Impulse reverbs, physical modeling softsynths (i.e. Sculpture >when it's eventually released), etc. like lots of G5 CPU power. > >My guess is that if it were up to the guys at Emagic SoundDiver would be >a happening thing, but I don't trust any big companies (i.e. Apple, not >Emagic) to have any motivation other than profit. Hey Bill, I agree that Apple, like most companies, is motivated by profit. Which is why I do not think they would have developed an OS X version of SoundDiver unless they planned on selling it. Considering the number of people who have Macintoshes and MIDI gear, there is a significant demand for editor/librarian software. That's money to be made in addition to selling softsynths and new computers.

No offense to the individual who created the AN1X adaptation, but it's a bit less than fully usable without having access to the effects section. Am I missing something here? I didn't see any effects parameters listed. If someone knows something I don't, feel free to slap me around and set me straight. I'm hoping to gain access to the old Yamaha AN1X editor that Yamaha wrote for OS 9. It worked rather well. There's a beta driver being worked on to allow OMS dependent apps to work in Classic mode alongside OS X. If that's successful that will be a decent enough workaround. On the other side of things, the adaptation for the Access Virus is awesome and oh-so-polished. Since I was new to my Virus I was pulling my hair trying to access the keyboard/portamento functions to change a sound from monophonic voice allocation, to polyphonic. The manual was no help. But I launched Soundiver and there it was plain as day. The Virus editor is thing of beauty. I too experienced Soundiver not recognizing my AMT8 on re-start, but I ignored it and cancelled it trying to re-scan. I was still able to access any of my synths just by double clicking on them to bring up the editor window, and communication worked fine in both directions. So I think the start-up glitch is only a "pseudo glitch", in that communication between the computer and the AMT8 is working fine, even if the app thinks it isn't.

Mark wrote: > > Hey Bill, I agree that Apple, like most companies, is motivated by > profit. Which is why I do not think they would have developed an OS > X version of SoundDiver unless they planned on selling it. > Considering the number of people who have Macintoshes and MIDI gear, > there is a significant demand for editor/librarian software. That's > money to be made in addition to selling softsynths and new computers. Yeah, good point Mark. Maybe my sordid little mind is just too cynical.... or maybe not.

Hi, I am realtevely new to the list and couldn't find good answers to my problems in the message archive: Sounddiver doesn't work properly on my setup (OS:W2000/AMD Athlon XP2600). The only units that sounddiver seems to find while scanning are my Unitor Midi-Interface and my old Korg T2 synth. ALl my other units won't be recognized by the software although they are connected properly (in to out and vice versa) and I have set them up like mentioned in the online help. Here's the list of the units I talk about: Line6 PodPro, Akai S3000, Korg A2, TC 2290, Yamaha SPX90, Yamaha SPX990, Yamaha SY77 I have set the Device ID's, I tried to install them manually but they never get recognized. WHen trying to do a loop-test of the Interface, that test lasts for about 20 minutes and then the program aborts and restarts the PC. Any hints? If not I will sell my Sounddiver 3.0 software. Thanx for reading, Stefan

> I have set the Device ID's, I tried to install them manually but they never > get recognized. > WHen trying to do a loop-test of the Interface, that test lasts for about 20 > minutes and then the program aborts and restarts the PC. Hi Stefan, I think I know what your problem is...if so, its a miracle you've got so much scanned! But there is a solution. I had this problem running 2000 and emailed Soundtech (UK Support) and got this response which sorted out all my issues in one swoop. Regards, Mike >Hi > >Options --> Settings --> Midi interface and communication (I think) > >What your looking for is the Default buffer size is 64k . . . Set it >to 1k. > >That¹s it. > >You only need to do this if your on windows 2000 or XP.

I was looking through the archives and couldn't find it so ... What is the cheapest way to try out Soundiver for OSX beta? I don't own Logic but I do own Soundiver for OS9. Steve

--- In sounddiver-users@yahoogroups.com, Steve Ginn <sginn@m...> wrote: > I was looking through the archives and couldn't find it so ... > > What is the cheapest way to try out Soundiver for OSX beta? I don't own > Logic but I do own Soundiver for OS9. > > Steve You gotta get an XS key. Logic Express ($299, $149 edu) would be the cheapest route if you buy new. Another option is to buy a version of Logic 5 or 6, Plat, Gold, or Silver on ebay (as long as it comes with an XS key, you're set) and transfer the license to yourself.

Hello Michael, i finally found an sy99 to replace my tg77 there are many PD banks in T format that are still not readable by SDiver, with the import function , how come ? u can get them all in there, 22mb files sorry ! (very few will work on Sdiver) ftp://ftp.rssd.esa.int/pub/atoni/in/allsy99.zip as with the sy77/tg77 some T file are readable some are not .. and unfortunately the same apply to the sy99 yes, i do have the latest SY/Sdiver adaptations on WINXP SP1 Maudio Aphile 2496 (latest driver). i taught this problem was fixed in 3.05 but is still there. Worst thing of all is that while u build up a library with the imported T files one by one , SD will crash on a bad one and u have to start ALL OVER again !!! EVERY dammm time ! till u find by trail and error the good or bad T file ! Actually they are all good if u load them via floppy so how come that Sdiver can't import them ? i can also send u the midi specs for the sy99 but i am sure u have them already or u can get them on line from Yamaha. and yes of course i can load them all via floppy one by one but this is not the point :-( Tnx in advance Regards ----------------------------------------------Env1-----Env2--Env3----------- Andrea.TONI@... Vco1 | | Solar and Solar-Terrestrial Missions (Sci-Sh) Vco2-->--Vcf-->Vca-->Ducati996 http://www.rssd.esa.int Vco3 / | | / ----------------------------------------------Lfo1-----Lfo2--Lfo3-----------

I realise that this is not strictly a Soundiver question but you can imagine that with a MIDI related question, Soundiver users may well have the answer to my question - so hopefully it will be allowed! I hate to do this but I did read the manual first honest! I use my Proteus 2000 very lazily, as a preset sound source, have for a couple of years,never learning to use it remotely properly. Now I wish to make one minor edit and I can't work out how! I want to use it permanently in multi timbral mode, selecting patches on each of just the first 16 MIDI channels from Logic (That works) but I need to be able to adjust the FX levels for each MIDI channel by sending CC messages on the relevant MIDI channel, for each part. As far as I can tell, this feature doesn't show up in the Multi mode edit page and although I found a page that allows the setting of virtual patch chords that would EVENTUALLY allow me to do what I want, this looked like it was in patch edit - ie I would have to do it to every patch! I can't believe that's right. Anyone able to give me an idiots guide to setting this up the way I want? Shame E-MU didn't just use CC91, 92 ,93 same as most other manufacturers....Cheers, Gareth

Could anybody help me with a windows version that is available for sale. thanks for any help!

On 2/28/04 11:02 PM, "rsadler33" <sadronlou@...> wrote: > Could anybody help me with a windows version that is available for > sale. thanks for any help! > I think Windows and Mac versions are both on the same CD.

Hi, I made a KORG Audio Gallery AG-10 adaptation. AG-10 is the lowest end model of 01/W line. Using my editor, I found AG-10's hidden waveforms and the new waveform modulation. See the link below for * AG-10 SoundDiver adaptation * Info about the hidden waveforms and modulation * Sound examples. Best, Sealed http://homepage.mac.com/synth_seal/html/index.html

Hi, This is an automatically generated message. It contains the following paragraphs: A) Rules B) Features C) General info (subscriptions etc) A. RULES -------------- This is an unmoderated list, so we ask you to respect the "netiquette". Please stick to the following rules: #1 Use useful subject lines. #2 No excessive quoting. Cut out parts that aren't relevant to your reply. #3 No platform wars, politics, or other flame wars allowed on this list. Offending language or personal attacks also not allowed on this list. #4 Subscribers who don't act according to the rules of this list might be banned at the discretion of the moderators. #5 Replies to OT messages should be done in private. If possible, try to post OT messages to the Logic-OT list instead. B. FEATURES -------------------- We offer many services. You'll notice some nice advantages of being subscribed to this list once you've been subscribed for a while! Here's a list with the most common features: * User-provided info: this is one of the most informative mailinglists available. * Emagic-provided info: some Emagic people are subscribed and are actively taking part in the discussions. They do so without any obligation, so every mail they send is based on their goodwill. Keep in mind that this is not an official list! It is made BY users FOR users! * You can manage your account: choose between "individual emails" (lots of traffic: up to 100 mails a day!), "daily digests" (= all emails bundled into one big mail) or "no mail/web based only" (= you're still subscribed, so you can still browse through the archives, but you don't receive any emails anymore -> handy when you're going on holiday and don't want an overloaded mailbox: instead of unsubscribing, just switch to "no mail/ web based only" until you're back). * You can browse and search the archives. * You can see info about other users. * We have an online Calendar: you can find the dates of all interesting fairs etc. * Many other things... C. GENERAL INFO --------------------------- Post message: sounddiver-users@yahoogroups.com Subscribe: sounddiver-users-subscribe@yahoogroups.com Unsubscribe: sounddiver-users-unsubscribe@yahoogroups.com List owner: sounddiver-users-owner@yahoogroups.com Switch between "Individual mails" - "Digests" - "no mail/web based only": http://groups.yahoo.com/group/sounddiver-users/join Searchable Archives: http://groups.yahoo.com/group/sounddiver-users/messages Online Calendar: http://groups.yahoo.com/group/sounddiver-users/calendar General overview of all addresses of Logic related mailinglists: http://www.belway.com/lug Emagic Official Homepage: http://www.emagic.de Environments: http://www.swiftkick.com/ Thanks, Jeremy Martin sounddiver-users-owner@yahoogroups.com

Hi there, I'm a complete newbie to Sounddiver 3. I set everything up at the weekend and managed to get everything talking to Sounddiver properly, except my Oberheim Matrix 6. I'm guessing the fact it's old makes it slightly more awkward to set up. Can anyone give me some tips? Many thanks John

when I save K2000 patches to a library, it saves the dependent data types too. but when I transmit these patches to the K2000, I get the following error message in SD: "for x of y library entries, no suitable device was found.' (x and y depending on the number of patches I transmit). Has any else seen this message? I'm using a fairly recent version of SD (3.xx) on OS9.2x. Any help would be greatly appreciated. Paul

On 02/03/2004, at 11:53 PM, pathic909 wrote: > Hi there, > > I'm a complete newbie to Sounddiver 3. I set everything up at the > weekend and managed to get everything talking to Sounddiver properly, > except my Oberheim Matrix 6. I'm guessing the fact it's old makes it > slightly more awkward to set up. > > Can anyone give me some tips? > Gosh. It's been about 5 years since I had my Matrix 6. I remember it does work. Have you checked all the Matrix parameters? It's a very deep beast and there are several (from memory) of them that relate to sysex send receive. Check midi channel and device ID match in SD and Matrix. If you need more help maybe mention what parameters are available in the Matrix.... Good luck ::::::::::::::::::::::::::::::::::::::::::::::::::: Paul Najar Jaminajar Music Production www.jaminajar.com

Rachel, I have had the same problem in OSX but I've had a bit of success resolving the problem. Two things to try to resolve this problem. 1. Make sure that your synth is in performance mode. 2. Try increasing the send pause and play delay times. Good Luck --- In sounddiver-users@yahoogroups.com, <grove@z...> wrote: > > Date: Thu, 05 Feb 2004 21:10:51 -0000 > > From: "John Pazdan" <jpazdan@w...> > > Subject: OSX Beta/microkorg/midisport 2x2 > > > > anyone here using this combination? i cannot get it to work properly. > > When i try to > > scan the synth, only a few patches come up, though it's been > > strangely inconsistent, > > as a few times I have tried, all the patches show up. I am a complete > > novice with this > > program, have read the manual , but can't get it working right. > > I also have a MicroKorg plus a MIDIsport 4x4 > and the same thing happens. I do not know if it is the adaptation > or the interface. I have an MTP-II connected via a Stealth Serial port > and it does the same thing for nearly all my instruments. > > I have just bought an AMT8 to replace the MTP-II and I'm counting on > being able to work properly with Sounddiver on that. I'll have to move > my simpler MIDI gear onto the MIDIsport so I can utilise the best of the > AMT8's filtering and routing. > > Is the AMT8 actually working ok with Sounddiver on OSX yet? > > > rachel > > > > > -- > Rachel Polanskis Systems Admin, University of Western Sydney > V1-37, Kingswood Campus (+61 2) 47 360 291 <r.polanskis@u...> > "They who would give up an essential liberty for temporary security, > deserve neither liberty or security" - Benjamin Franklin, 1759

Hi, Ive just started to try and use SD again as I used to get frustrated with it crashing a lot. My midi is all setup fine but I just cant get SD to scan my SB Audigy outs. It tries to scan the SB internal synth and...(surprise) it finds nothing. How exactly do I do this?? regards andy

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the sounddiver-users group. File : /Mo Rack Editor.sit Uploaded by : msjones4th <mjones4th@...> Description : Multi Editor for Logic 6 You can access this file at the URL http://groups.yahoo.com/group/sounddiver-users/files/Mo%20Rack%20Editor.sit To learn more about file sharing for your group, please visit http://help.yahoo.com/help/us/groups/files Regards, msjones4th <mjones4th@...>

Hi guys, I've created an editor environment for the Motif Rack. Not exactly an SD adaptation, but it beats punching buttons and reading an LCD interface. Details are in the readme file. Enjoy!!! Mitzelplik

I have a Yamaha VL1 v2. I have a Mac G3 computer and software Emagic SoundDiver. I have managed to download Yamaha "Sounds" but Yamaha "System" will not download. Computer says "Device VL1 v2 does not react" (SoundDiver). Any ideas?

Anyone using a Virus "B" series with software 4.9 and soundiver 3.0.52 (retail) on a mac using OS9? I have used these together for the longest time no problem. Somehow I am getting checksum errors when I try and dump banks into my virus. Also some of the patches that get dummped end up in the wrong place and/or with corrupt names. very odd. Any thoughts? Thanks in advanced.