At 16:06 +0100 18-03-03, Ingo Debus wrote: >Hallvard Tangeraas wrote: >> Back in the days when SoundDiver was released for the very first time... >> was it released only for the Atari ST, or for the Mac as well? >> >> I'm asking because I'm currently using the Atari ST version (2.06), and >> although it works fine there's a bug which prevents me from fully editing >> adaptions, giving me a "out of memory" error message (even though I know >> that there's more than enough memory available). >I remember that I created adaptations on the Atari ST/Falcon >sucessfully, but I don't remember which SoundDiver version that was. Have you found out more since you posted the above? Do you have have the chance to check? Hallvard -- Notator/Creator SL : <http://www.notator.org>; Atari Launchpad : <http://launchpad.atari.org>;

hy all, i'm new SoundDiver user, i'm happy to archive my synth JP8000, Waldorf q, Korg ms2000r but ob12 synth is not possible !!! My quiestion is how make the adaptetion for this synth ? or ? Thank's a lot

motu microExpress interface dunno which board rev -Andrew --- In sounddiver-users@yahoogroups.com, "jamescoplin" <moog@q...> wrote: > --- In sounddiver-users@yahoogroups.com, "burgessa23" <aburgess@i...> > wrote: > > --- In sounddiver-users@yahoogroups.com, "jamescoplin" <moog@q...> > wrote: > > > does anyone have this working? i've an xt with os 2.33 (most > current) > > > and sounddiver running on xp. every time i try to send a sound to > the > > > microwave it hangs. what's going on? > > > > > > james > > > > > > > > works fine on my mac, same microwave os sd 3.0.5 > > > > -Andrew > > what is the board rev on your xt? i have a "shadow" xt with board #3. > also, what midi interface are you running? i have 2 emagic unitor 8 > mkII and a amt8. thanks. > > james

Is there an editor for the Boss GT-6 yet? Will it work with SoundDiver version 2.06? How do I get it?

Hi! A problem with SD. I haven't had this on Win98, now that I have XP the following problem occurs. When I start Sounddiver (with or without any sequencer in RAM) SD takes a very long time to start. It is displayed that it requests MIDI data from somewhere but my amt8 doesn't show any transfer. I can press ESC but that doesn't accellerate the whole thing. Furthermore, when SD finally shows my setup (only an SY85 and an UltraProteus) it takes another long time (about 45 seconds) when I doubleclick the Proteus and want to open the Memory Manager. SD obviously tries to request the Preset list (just the list, not the presets themselves). At least that's what it did under Win98. But now it takes another long time. However, there is MIDI transfer of some kind during that, but only seldom. The majority is many seconds of doing nothing. All the hardware involved works fine with a sequencer, no timing problems etc. That's why I assume it must be a problem with SD. Can anyone help? MF

Regarding problems editing adaptions in the Atari ST version..... I'm currently using version 2.06 (which won't let me fully edit adaptions because of a bug -text input in the Sysex part sometimes gives me a "out of memory" error while I can edit the rest of the adaption just fine). But I managed to install an older version on the same computer, namely Sounddiver 1.57. This version fortunately allows me to edit the Sysex stuff and doesn't give me that error message, but I can't figure out how to edit the actual graphical layout stuff (buttons, switches etc.). I can't find any menu for this, while in 2.06 I have it alongside the "edit" menu under "Adaption". Can someone tell me how? Hallvard -- Notator/Creator SL : <http://www.notator.org>; Atari Launchpad : <http://launchpad.atari.org>;

At 12:12 Uhr +0100 25.03.2003, Hallvard Tangeraas wrote: >I'm currently using version 2.06 (which won't let me fully edit adaptions >because of a bug -text input in the Sysex part sometimes gives me a "out of >memory" error while I can edit the rest of the adaption just fine). > >But I managed to install an older version on the same computer, namely >Sounddiver 1.57. This version fortunately allows me to edit the Sysex stuff >and doesn't give me that error message, but I can't figure out how to edit >the actual graphical layout stuff (buttons, switches etc.). > >I can't find any menu for this, while in 2.06 I have it alongside the >"edit" menu under "Adaption". Can someone tell me how? AFAIR you have to hold down ALT. -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Hello there! I am relatively new to sounddiver and have been trying to get to grips with it in conjuction with the Access Virus. Does anybody know if there are any books available or manuals explaining some in depth parts of the programme. My version of Sounddiver came with no manual, perhaps someone knows of a website with good tips and instuctions?? thanx in advance

Hi, anyone who knows: I've been unable to authorize SoundDiver from the internal CD drive on my mirrored-door dual 867 G4, my SCSI CD burner OR my Pioneer DVD-R drive, using any variety of extensions (there's the Apple CD/DVD driver, Toast's drivers, a Charismac driver, etc...). Furthermore, while WaveBurner will work with the Charismac driver, it won't work if the Toast drivers are also enabled, Toast won't work with the Charismac driver, blah, blah, blah. I've only been able to authorize things by booting my tower as a target disc to my Powerbook G4, setting the tower's internal drive as the boot drive and authorizing from the Powerbook's CD drive. Can anyone advise me of a means to authorize SD from ANY of the drives I own, or does anyone have some configuration on these machines that lets everyone play together? Is there not enough strife in this world without conflict in my Macintosh? Thanks, George Whitty

I'm new to this message board so forgive me if I'm asking a question that has been answered before, but I need to know why Sounddiver 3.0.5 is not seeing my Triton Studio. Is it supported? Other keyboards are detected. If I manually add it, set it to the right port, open it up and request a patch nothing comes accross. Strictly from a MIDI standpoint Logic is communicating with it. Equip: Triton Studio G4 Studio 4 through serial port on Griffin G4Port Thanks. Travis

Does someone know if and when Sounddiver will support a bank librarian for the Minimoog Voyager ? (don't need a patch editor really...) Thanks Eric

> Somebody screwed up the Korg adaptations...same problem with Triton Le > and Karma here.The fact that there is no fix, let alone aknowledgement of this bug, leads me to think that Soundiver is going the way of Opcode. Hope I'm wrong. > > I'm new to this message board so forgive me if I'm asking a question > that has been answered before, but I need to know why Sounddiver > 3.0.5 is not seeing my Triton Studio. Is it supported? Other > keyboards are detected. If I manually add it, set it to the right > port, open it up and request a patch nothing comes accross. Strictly > from a MIDI standpoint Logic is communicating with it. > > Equip: > Triton Studio > G4 > Studio 4 through serial port on Griffin G4Port > > Thanks. > > Travis >

I upgraded to Logic 6 this past weekend. Normally I use Logic and SD together. I lauch Logic first and then SD. Once both programs are lauched I go to the set up wiindow in SD and choose Load and transmit file--in order to load my synth patches and settings for the song that I am working on. When I choose this option and I select the file to be opened and transmitted I get a message from SD asking me if I want to transmit the entries. I choose yes and for the next minute or so various devices in my system indicate that they are receiving sys ex information. However, the information only goes into the memory manager buffers not to the synths. I have to go into the memory manager for each device and select either the single patch entry or the bank entry and manually transmit them to the device in order for the sounds to be loaded properly. Has any one else had this problem? THE GEAR & MY SETTINGS: G4 450, OS 9.2.2, 512 megs ram, Logic Audio Platinum 6.0, Sound Diver, 3.04, UAD-1 card, Motu PCI-324 card, Waves Gold Bundle Native, Absynth, Virtual Guitarist, Unitor 8 II, AMT8. I am using the Motu PCI-324 console v. 2.4 which when installed placed asio driver version 2.1 in my Logic ASIO drivers folder, and placed PCI-324 Sound Manager Driver v. 1.2. in my extensions folder, and placed the PCI driver v. 1.5 in my extension folder as well. thanks daviscremar@...

I've been using Sound Diver with a number of synths with good results until yesterday.I picked up an Ensoniq VFX-SD.The VFX scanned fine,and I can receive the memory or send what's in the device window fine.When I try to build a library,though,Sound Diver immediately crashes.I have Sound Diver set up with the 1 Kb buffers,and I've tried it in 98 Compatability mode-no luck.All I know is that it's a nt.dll problem.Any advice? Thanks, ew

Hi, Anyone know if an adaptation is available or planned for this unit? Thanks M

I am having the exact same problem with my E-Mu Planet Earth module. Also it won't make a sound from sound diver. Not by any method. --- In sounddiver-users@yahoogroups.com, dhuggins <dhuggins@h...> wrote: > Heh all (especially Michael;) > > I just got an EMU Vintage Pro, which is based on the Proteus 2000 unit. I > posted here earlier, and the consensus was that the Proteus 2000 SD module > should work. I added it and it seemed to work, up to a point. I am able > to access the presets, but doing so hangs up my unit - no sounds will come > out. All I do is highlight one of the presets, which then shows on the > Vintage Pro's display, and the unit won't make any more sounds until I turn > it off and back on or choose another preset from the units front panel. I > know that the Vintage Pro is getting MIDI, because the midi indicator > lights up on the VP unit when I press a key on my controller. > > Help would be appreciated. You all have helped me mucho in the past :) > > Dave

Please find after the Link where you can get : - an Adaptation for the VoiceOne of TC Helicon PC and MAC - an Environment for the VoiceOne of TC Helicon PC and MAC http://www.tc-helicon.tc/Default.asp?Id”8 Best regards Cyril Blanc France

Interesting... Could this be the future regarding editors? No more standalone applications for editing, but a VST (or whatever) plugin in the host environment like Logic, Cubase etc. I ask this, because since there are no major updates for SD in a long time, maybe Emagic is following the same path in there development labs? Fellow users, what's your opinion about this? Greetings, Bert. --- In sounddiver-users@yahoogroups.com, Cyril Blanc <blanc.cyril@w...> wrote: > Please find after the Link where you can get : > > - an Adaptation for the VoiceOne of TC Helicon PC and MAC > - an Environment for the VoiceOne of TC Helicon PC and MAC > > http://www.tc-helicon.tc/Default.asp?Id”8 > > > Best regards > > Cyril Blanc > France

Hi George, try zapping your P-RAM, works wonders sometimes. Toast / WB extension conflicts are well known and documented, so there doesn't seem to be a means of using both apps without reboot. Also Apple's own Authoring Support extension used to conflict with WB - don't know if that's still the case. If your probs are the result of an extension conflict, try basic extension set ("preset" from the menu inside ext. manager) to see if authorization is poss. this way. Other than that: try & error, or a clean install. It's spring cleaning time :-) All else is just guessing, as I don''t know nothing of your hardware, OS ect etc. Hope that helps Regards Jo Oheim > Date: Tue, 25 Mar 2003 10:45:59 -0500 > From: GeoW97@... > Subject: Unable to authorize without root canal... > > Hi, anyone who knows: > > I've been unable to authorize SoundDiver from the internal CD drive > on my mirrored-door dual 867 G4, my SCSI CD burner OR my Pioneer DVD-R > drive, using any variety of extensions (there's the Apple CD/DVD > driver, Toast's drivers, a Charismac driver, etc...). Furthermore, > while WaveBurner will work with the Charismac driver, it won't work if > the Toast drivers are also enabled, Toast won't work with the > Charismac driver, blah, blah, blah. I've only been able to authorize > things by booting my tower as a target disc to my Powerbook G4, > setting the tower's internal drive as the boot drive and authorizing > from the Powerbook's CD drive. Can anyone advise me of a means to > authorize SD from ANY of the drives I own, or does anyone have some > configuration on these machines that lets everyone play together? Is > there not enough strife in this world without conflict in my Macintosh? > > Thanks, > George Whitty

I just purchased Emagic sound diver. When I dump the program banks into sound diver it seems to be transmitting and sound diver receives but the patch names do not show up in the device screen. I logged onto a sound diver users web site and this seems to be an on going problem. Is there a current solution to this issue? Your advice in this matter would be greatly appreciated.

Hi I'm using SD3.05 with a Korg Z1.I am having trouble dumping new sound banks into SD as a standard midi file. Is there a new adaption for the Z1 that fixes this? Simon

Hi, Some synths has important parameters that can be controlled only by realtime editing but not stored in memory. TX81Z's 'Operator mute' setting is an example of such 'realtime-only' parameters. It's difficult to control such parameters with SD's universal adaptation, as any controllers should have its own 'memory offset.' So I increased the data size and used the newly added bytes as the virtual memory offset for 'realtime-only' parameters. The problem occurs when receiving the data. I hoped that SD sees the incoming data coincides with the fractional dump string, but SD just ignored the data. How can I make SD receive the data which are less than the defined data size? Thanks very much in advance. Best, Sealed

Hi. I just received my JV-1010 and Soundiver last week on closeout Demo from a local music store, However the instruction manuals were NOT included. I cant complain because I only paid $225 for the boxed unit in perfect shape. However I don't have a credit card to order the manuals. I know there is not a PDF file for soundiver….Or JV-1010. Has any one just scanned the instructions? email them to me? I'm getting totally lost with this unit because I'm making the problem even more complex by using Axon-Ax 100 converter to midi guitar. Would it be rude to ask for a JV-1010 Midi Sysex dump? That way I could see what's going on. Or perhaps a Soundiver file on the JV- 1010? Any advice is grateful while I await shipping of my JV-1010 and soundiver manuals. Scan any one?

hey!! you should complain bigtime!! thats what i payed for..the manual i mean. the app itself can be downloaded for free on every shitty hotlineserver on the net!! but cant be used without the manual..no i dont think theres a pdf manual for soundiver.(thats emegics safe!! NO PDF MANAUALS FOR SOFTWARE!! looka at the box there is your SN#. contact emagic and tell them your case and you should get your manuaL. you have to get a manual for a app like this. peter __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com

>hey!! you should complain bigtime!! thats what i payed >for..the manual i mean. I think you're missing the point. The JV-1010 was sold with an OEM version of SoundDiver. However, OEM versions always came without a manual; one could order a printed manual from Emagic, though. My advice for the original poster would be to find someone with a credit card and have him order the manual. -- Malte Rogacki gacki@... ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out of it." (ARP 2600 Owner's Manual) ----------------------------------------------------------------------------