hi there! wondered if anyone might be able to help me solve 'the mystery of the missing amt-8s' in sounddiver 3 (i've tried 3.0, 3.04 and 3.05 on xp and all with the same results)? ... i'm on xp, i've done some archive digging, done the 1k buffer thang, had a look at all of the amt8 settings in win.ini (all of them are either 1 or 7) but still i cannot get sounddiver to find them... it can find my midi gear that's attached to them (and then tells me that they're connected via the various amt ins/outs) but the amt's won't display in the set-up screen. on scanning for them the screen flashes as if it has found them but won't display them at all. manual scanning doesn't seem to work either! :( thing is, i've got unitor8 control working fine... it scanned and found them without any trouble at all! all the drivers seem to be fine (they're the latest ones from the emagic site) but sd is not having any of it! if anyone has any ideas that they might have time to share that would be muchly appreciated! :) oh... and happy christmas everyone! thanks alanx __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

Michael, I have taken the liberty to modify the MKS-80 adaptation somewhat. Uploaded to the files section of this list. You can use it if you will. Changes: 1. Separate entries(patch and tone) for the lookalike MPG-80 editor. Still compatible with excisting entries (conversion tables added) 2. Now include the "Tune Request" feature. (the "F6" message, workaround) 3. New photographic icon wich shows the MKS-80 AND MPG-80. Greetings, Bert Keizer.

Hi All, after upgrading from 3.04 to 3.05, SD does not recognize my Proteus MPS anymore. With SD 3.04 it recognized it as a Proteus at least. All other midi-stuff works, also with MPS. Any ideas, why this can happen? Thanks in advance, regards, and merry christmas to all of you Michael

--- In sounddiver-users@yahoogroups.com, "michael_garri <Michael.Garri@n...>" <Michael.Garri@n...> wrote: > Hi All, > > after upgrading from 3.04 to 3.05, SD does not recognize my Proteus > MPS anymore. With SD 3.04 it recognized it as a Proteus at least. > All other midi-stuff works, also with MPS. > Wow, I can't believe someone else here has an MPS. I have not tried 3.05 but I don't think I had much luck with 3.04 scanning. I've always manually added my stuff. Dave

Hello Just to respond to this thread : The Midi driver wrote by GEETHREE seams to be a GENERIC UNIVERSAL MTP MIDI DRIVER for serial midi interfaces for MAC OS X 10.2.X So far I have report from users saying it is working with : - 1 Unitor 8 - 2 MIDI Time Piece - 1 MAC Midiman - 1 MIDI Time Piece AV - 1 J L Cooper synclink serial - 1 MidiExpress+ MT4 - 2 MIDI Time Piece II So far, none of the people I have sent this MIDI driver have reported problems. To test more configurations I am looking for users having the configurations : - 1 and 2 Opcode Studio (the one that has more than 8 ports) - 1 and 2 Opcode Studio 8 - 1 Opcode Studio 8 and 1 Motu MTP (I or II or AV) - 1 Opcode Studio 8 and 1 Motu MTP + Emagic AMT8 - 2 Emagic Unitor 8 I have not wrote the driver it is Geethree, I am just the initiator of this crusade :-) I think that Geethree is giving us a wonderful Christmas present, thanks again ! Merry Christmas Cyril

I am very curious about this. I have been running SD 3.0.4 on XP for about six months now. I did not have any idea (since it worked just fine) that Xp was not actually supported by SD. Have some people not been able to run SD on XP? I use 1kb, and I believe that I have it set to 2 buffers (I'm not at my little studio right now). Thanks, Marc In a message dated 12/23/2002 6:25:57 AM Pacific Standard Time, sounddiver-users@yahoogroups.com writes: > Now we have a Sounddiver that supports windows xp, can someone > suggest good settings for the number of buffers and the KB per midi > input buffer under the midi communication settings tab? > > many thanks to all. > TW

Try dragging and dropping a patch from the main "Programs" window into a library, in XP it won't work. -Steve ----- Original Message ----- From: <RandomLFO@...> To: <sounddiver-users@yahoogroups.com> Sent: Monday, December 23, 2002 11:38 PM Subject: Re: [SoundDiver] Digest Number 1249 > I am very curious about this. I have been running SD 3.0.4 on XP for > about six months now. I did not have any idea (since it worked just fine) > that Xp was not actually supported by SD. Have some people not been able to > run SD on XP? > I use 1kb, and I believe that I have it set to 2 buffers (I'm not at my > little studio right now). > Thanks, Marc > > In a message dated 12/23/2002 6:25:57 AM Pacific Standard Time, > sounddiver-users@yahoogroups.com writes: > > > Now we have a Sounddiver that supports windows xp, can someone > > suggest good settings for the number of buffers and the KB per midi > > input buffer under the midi communication settings tab? > > > > many thanks to all. > > TW > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >

Hi Does anyone know if the Sound Diver OEM versions (I have a Yamaha FS1R version) work under Windows 2000 or Sound Diver 3.04 work under Win 2K. I was using a Music Quest 8 Port SE and thought that might be the problem so I changed to a new Super MPU64 (aka Edirol UM-4) USB Interface. I have Updated the OEM version from ver 2.00 to ver 3 with the Patch updater from the Emagic site. Any help would be appreciated Dean dean@nospam@... --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.422 / Virus Database: 237 - Release Date: 20/11/2002/

Is it possible to use Logic Control with Sounddiver , it mentions that it's possible in the LC manual and says to refer to SD documentation, but I can't find it ? Will there be an updated Korg Karma adaption that supports Karma OS V2 ?

Installed SD 3.05 on my mac G4 DP 533. (minimum extension set) Deleted old preferences and version 3.04 Here are my findings: Scanning of my outgear goes VERY bad ; SD can't even find my AMT8. Also gear like JV 1080 and FS1R (which were scanned 100% in version 3.04) can't be found through scanning in 3.05... BUMMER :( Manual adding or scanning the module for NORDRACKII gives a hard CRASH of my mac...freezing mouse...BUMMER 2 :(( The module for Micro Q now gives strange error messages i've never seen in 3.04 ;so it becomes rather unusable ... BUMMER 3 :((( When in AUTOLINK mode with Logic 5.5., SD looses ALL midi communication with the AMT 8...so makes SD unusable even more...BUMMER 4 :((((( I'm a SD user for about 3 years now,(really knows all the ins and outs of it), i have a well optimized system and this is what i get after waiting about a year now for this NOT AT ALL WORKING miserable update. And to make the pain alittle harder: still no official news from Apple and/or Emagic about an OSX version coming up ; Michael keeps his mouth shut after several emails.. Thanx but no thx for all this crap. Vanhaze

Vanhaze wrote: <Scanning of my outgear goes VERY bad ; SD can't even find my AMT8.> ... i had this problem when trying updating to sd3.05 on xp, asked if anyone here knew of any way of making it work but got no answers. in the end i reverted back to 3.04 and managed to get my amt's back in the set-up window. oh well... :( __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

Many thx for your reply ! Ridiculous that nobody has answered to your problem. Could not that be that we are the only two having that problem.. Greetz Vanhaze --- In sounddiver-users@yahoogroups.com, alan platten <taoyoyo@y...> wrote: > Vanhaze wrote: <Scanning of my outgear goes VERY bad ; > SD can't even find my AMT8.> > > ... i had this problem when trying updating to sd3.05 > on xp, asked if anyone here knew of any way of making > it work but got no answers. in the end i reverted back > to 3.04 and managed to get my amt's back in the set-up > window. oh well... > > :( > > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com

I keep reading about scanning problems and can not understand why you guys bother with it. Under the setup window, go to "New" / "Install...", select the module/device you want, and hit "ADD". Then set up the In/Out ports that the device uses on your AMT or whatever, set your midi chn and your done. Once you do this for all your devices you should not need to be messing with it until you buy a new synth. Yeah scanning should work better but its not that big a deal. BTW I'm using 3.05 on an off the shelf DELL 1.4 P4 running WIN XP with many devices hooked up through a Unitor 8 Mk II/AMT 8 pair with no problems. Life was never so good since I dumped my MTP-AVs although I understand they work better with a Mac. I hope this helps. --- In sounddiver-users@yahoogroups.com, "robbedobbie2001 <robbedobbie2001@y...>" <robbedobbie2001@y...> wrote: > Many thx for your reply ! > > Ridiculous that nobody has answered to your problem. > Could not that be that we are the only two having that problem.. > > Greetz > > Vanhaze > > > > --- In sounddiver-users@yahoogroups.com, alan platten <taoyoyo@y...> > wrote: > > Vanhaze wrote: <Scanning of my outgear goes VERY bad ; > > SD can't even find my AMT8.> > > > > ... i had this problem when trying updating to sd3.05 > > on xp, asked if anyone here knew of any way of making > > it work but got no answers. in the end i reverted back > > to 3.04 and managed to get my amt's back in the set-up > > window. oh well... > > > > :( > > > > > > __________________________________________________ > > Do You Yahoo!? > > Everything you'll ever need on one web page > > from News and Sport to Email and Music Charts > > http://uk.my.yahoo.com

The point is that a function in 3.04 (that is : scanning of devices) went very well for me in 3.04 and not anymore in 3.05, which is a step back. And as said, also manual adding devices goes not 100% well: manual adding a NordrackII module crashes my mac :( Vanhaze --- In sounddiver-users@yahoogroups.com, "markyboard <mwolinsky@c...>" <mwolinsky@c...> wrote: > I keep reading about scanning problems and can not understand why > you guys bother with it. Under the setup window, go > to "New" / "Install...", select the module/device you want, and > hit "ADD". Then set up the In/Out ports that the device uses on your > AMT or whatever, set your midi chn and your done. Once you do this > for all your devices you should not need to be messing with it until > you buy a new synth. Yeah scanning should work better but its not > that big a deal. BTW I'm using 3.05 on an off the shelf DELL 1.4 P4 > running WIN XP with many devices hooked up through a Unitor 8 Mk > II/AMT 8 pair with no problems. Life was never so good since I > dumped my MTP-AVs although I understand they work better with a Mac. > I hope this helps. > > > --- In sounddiver-users@yahoogroups.com, "robbedobbie2001 > <robbedobbie2001@y...>" <robbedobbie2001@y...> wrote: > > Many thx for your reply ! > > > > Ridiculous that nobody has answered to your problem. > > Could not that be that we are the only two having that problem.. > > > > Greetz > > > > Vanhaze > > > > > > > > --- In sounddiver-users@yahoogroups.com, alan platten > <taoyoyo@y...> > > wrote: > > > Vanhaze wrote: <Scanning of my outgear goes VERY bad ; > > > SD can't even find my AMT8.> > > > > > > ... i had this problem when trying updating to sd3.05 > > > on xp, asked if anyone here knew of any way of making > > > it work but got no answers. in the end i reverted back > > > to 3.04 and managed to get my amt's back in the set-up > > > window. oh well... > > > > > > :( > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Everything you'll ever need on one web page > > > from News and Sport to Email and Music Charts > > > http://uk.my.yahoo.com

Hello All, I have just installed Sounddiver 3.0 (made it recognize my D-50) and copied the Atari files to a DOS formatted disk and then copied them to my Window 2000 PC file system. Now that I try to load them into Sounddiver for transmitting them into my D-50 I run into trouble. What are the right steps to import an alien sound library into Sounddiver. Sounddiver is supposed to know the Gerdes file format I thought. When I open Library and choose a *.D5P it comes up with a error message: 'Sounddiver has to be endet. It caused a Windows Error'. Regards Hans

Hi Hans, Have you tried the <Import> function? (Rather than <Open> ) Regards - Colin >Hello All, >I have just installed Sounddiver 3.0 (made it recognize my D-50) >and copied the Atari files to a DOS formatted disk and then copied >them >to my Window 2000 PC file system. > >Now that I try to load them into Sounddiver for transmitting them >into my D-50 >I run into trouble. What are the right steps to import an alien sound >library into Sounddiver. Sounddiver is supposed to know the Gerdes >file format I thought. > >When I open Library and choose a *.D5P it comes up with a error >message: >'Sounddiver has to be endet. It caused a Windows Error'. > > >Regards >Hans > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Hi Sealed, I also had a problem with the TG500 adaption: Voice Edit did not work however Performance Edit did. The reason is a bug in the TG500 adaptation which you can change yourself (however I'd make a backup of tg500.ada before - one never knows). Here we go: - Enter the Edit mode for the adaptation. - Move to the Bank driver section, click the triangle of the Edit Voice entry so that the list drops down. - Look at the Single Dump table (the one after Single Request). It should display hex-code 68$ at offset 05 (this was the case with my adaptation). This is wrong, you should change it to 67$ and then save the adaptation. Now Voice Edit should work. The explanation is this: Open a Midi Monitor in SD and enter the Voice Edit mode in the TG500. Now you can see in the Midi Monitor what the TG500 dumped out. I compared this dump byte-by-byte with the dump definition in SD. Offset 5 was the only place where both dumps were not identical. Try the same for performances, you will see that the SysEx strings completely coincide. There is still another issue with the adaptation (at least in SD 2.1.3 for Windows). When you now proudly load a voice into the editor, you will (very likely) observe the bizarre envelopes of the "Cutoff Scaling" in the Filter EG section and the "Level Scaling" in the Amplifier EG section. They definitely do not display what's in the TG500. It's best not to touch them in SD if you don't really have to. When editing them in SD it often happened to me that the TG500 suddenly did not output any audio signal any more. I had to restore the scaling settings manually and only then I could proceed! And so I became used to the TG500 menu jungle which I wanted to avoid by - yes, by buying SoundDiver! Hope I could help you and other TG500 users a bit. Regards, Peter --- In sounddiver-users@yahoogroups.com, sealed <sealed@m...> wrote: > Hi, Richard. > > I'm glad to know that I'm not alone and you are using SD with both. As > you will agree, SY and TG are great synths - they worth being supported > still today. > > Since I began experimenting with both, I've found that not all is bad. > > One good thing in SD: Use TG500 adaptation for SY85 - You can edit SY85 > if you forget about the Voice Bank 3 and 4. SD does (a little) more than > Emagic thinks. > Bad things in SD: SY85 adaptation, when used with SY85, damages your > data. TG33 adaptation and others, too. > > Besides, one bad thing in YAMAHA: Errors in TG500 SysEx format are corrected > in the English manual. Bugs are only found in my Japanese manual, still > not corrected. That confused me much.... > > I expect Emagic should at least modify the supported models list - delete > the models in question, or mark them 'beta.' Acknowledgement is better > than falsity. > > Still there's no response from Emagic in recent weeks, while other products > are now updated. Michael and other crews seem to be exploited in the > update works and deprived of time for SD. I doubt if they are going to > terminate SD at all. > > I wish they would provide us a much better Universal Module before SD > is gone, so that users could write newer good adaptations. There are > many limitations in the present.... > > Regards, > Sealed > > > > This is just one of the many things that hack me off about Emagic ( > I > > have an SY85 &Tg500). They state it does xxxx machines, you pay your > > money, only to find that many of the adaptions are incomplete, bugged > to > > hell or don't work at all ! > > > > To be honest I would never give this company another penny of my hard > > earned money. SoundDiver is a very shoddy piece of software. I think > the > > best thing that could happen is the crackers break their protection, > and > > flood the market with a free cracked version, because it is worth > > nothing. > > > > Bitter?, me? ......... What do you think? ............. > > > > >Just to share my findings about YAMAHA TG500 adaptation. > > > > > >1) TG500 adaptation actually uses the SysEx code for SY85. So using > TG500 > > >adaptation, you can edit SY85 Voices. SY85 users had better use TG500 > > >adaptation to avoid SY85 adaptation's bug, though it does not have > access > > >to all of SY85's memory. > > > > > >According to YAMAHA's manual, TG500's SysEx codes should be different > > >from SY85's. YAMAHA manual seems to be wrong. > > > > > >2) Both TG500 adaptation and SY85 adaptation fails to request the > Edit > > >Buffer. Don't execute request while editing, as your own voice will > be > > >erased. > > > > > >Best, > > >Sealed > > > > -- > > Richard F

Sometimes you need scanning to determine the firmware of your device, which will determine other things like support for expansion roms. Joseph Puma IT Director Sandler Capital Management 767 Fifth Avenue, 45th Floor New York, NY 10153 212-754-8132 (tel) 212-754-8174 (fax) jpuma@... <mailto:jpuma@...> -----Original Message----- From: robbedobbie2001 <robbedobbie2001@...> [mailto:robbedobbie2001@...] Sent: Monday, December 30, 2002 3:12 AM To: sounddiver-users@yahoogroups.com Subject: Re: [SoundDiver] 3.05 SUX and here's why. The point is that a function in 3.04 (that is : scanning of devices) went very well for me in 3.04 and not anymore in 3.05, which is a step back. And as said, also manual adding devices goes not 100% well: manual adding a NordrackII module crashes my mac :( Vanhaze --- In sounddiver-users@yahoogroups.com, "markyboard <mwolinsky@c...>" <mwolinsky@c...> wrote: > I keep reading about scanning problems and can not understand why > you guys bother with it. Under the setup window, go > to "New" / "Install...", select the module/device you want, and > hit "ADD". Then set up the In/Out ports that the device uses on your > AMT or whatever, set your midi chn and your done. Once you do this > for all your devices you should not need to be messing with it until > you buy a new synth. Yeah scanning should work better but its not > that big a deal. BTW I'm using 3.05 on an off the shelf DELL 1.4 P4 > running WIN XP with many devices hooked up through a Unitor 8 Mk > II/AMT 8 pair with no problems. Life was never so good since I > dumped my MTP-AVs although I understand they work better with a Mac. > I hope this helps. > > > --- In sounddiver-users@yahoogroups.com, "robbedobbie2001 > <robbedobbie2001@y...>" <robbedobbie2001@y...> wrote: > > Many thx for your reply ! > > > > Ridiculous that nobody has answered to your problem. > > Could not that be that we are the only two having that problem.. > > > > Greetz > > > > Vanhaze > > > > > > > > --- In sounddiver-users@yahoogroups.com, alan platten > <taoyoyo@y...> > > wrote: > > > Vanhaze wrote: <Scanning of my outgear goes VERY bad ; > > > SD can't even find my AMT8.> > > > > > > ... i had this problem when trying updating to sd3.05 > > > on xp, asked if anyone here knew of any way of making > > > it work but got no answers. in the end i reverted back > > > to 3.04 and managed to get my amt's back in the set-up > > > window. oh well... > > > > > > :( > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Everything you'll ever need on one web page > > > from News and Sport to Email and Music Charts > > > http://uk.my.yahoo.com Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

--- In sounddiver-users@yahoogroups.com, "Joe Puma" <jpuma@b...> wrote: > Sometimes you need scanning to determine the firmware of your device, which... To determine the firmware should be an user-option. I have a MicrowaveI with the 2.0 firmware. Every time when this module gets re- installed, I have to go to the same procedure again, I mean connecting midi-cables. I don't like this. But I also mentioned this same problem a long time ago. Never has changed since then... Greetings, Bert Keizer.

I'll start with a little sucking up and say I am am quite satisfied with SD 3.05. I'm using it with my FS1Rs, Wavestation, E4, and Andromeda (librarian only - bring on the editor or at least let me edit the patch names - Collin) If Michael Hadyn is reading this, there is still a minor problem (although it drives me nuts) with editing the Korg Z1 effects. When selecting the mod source to control the balance of the effect it selects the wrong controller. For example if in FX 1 with Chorus as the effect, selecting the Foot pedal for the freq/mod source actually selects "+Y" as the source when viewed in the display on the Z1. This is true for all mod sources within the effects. Mod sources selected through out the rest of the pages (filters, amps osc etc) work correctly. I reported this directly to emagic a while back but it appears to have slipped thru the cracks. I am using a dell 1.4 P4 with Win XP and a Unitor8Mk 2/AMT8 pair. The Z1 is ver 1.02 Thanks for your attention to this and for continuing to provide a great editor program.

3.05 seems to work just fine on my Mac system. I can't see that I have gained anything though. There are supposed to be some updates to the Triton adapation, but other than that, it seems like a long wait for nothing. Everything scanned fine and seems to be working fine. Again my only complaint is with needing more of my equipment supported. Boss GT-6 : If the GT-5 was worth doing, why not this much improved model? Korg Karma: Well, enough has been said about being only OS 1 - that is kinda pointless. Would like to see in OS X beta soon as I start to convert my studio over. Still think that some kind of "adaption wizard" that could help users a little more setting up there own equipment would be great. On some gear, I don't need full editing in SD, if I could just use it as a librarian to give patches a description and load and save them, it would be awesome.

>I'll start with a little sucking up and say I am am quite satisfied >with SD 3.05. I'm using it with my FS1Rs, Wavestation, E4, and >Andromeda (librarian only - bring on the editor or at least let me >edit the patch names - Collin) If the Patch names are displayed in the Device Window they also can be edited. Click an entry, then choose "rename" in the entry menu (or hit the appropriate key command). >If Michael Hadyn is reading this, there is still a minor problem >(although it drives me nuts) with editing the Korg Z1 effects. When >selecting the mod source to control the balance of the effect it >selects the wrong controller. For example if in FX 1 with Chorus as >the effect, selecting the Foot pedal for the freq/mod source >actually selects "+Y" as the source when viewed in the display on >the Z1. This is true for all mod sources within the effects. Mod >sources selected through out the rest of the pages (filters, amps >osc etc) work correctly. >I reported this directly to emagic a while back but it appears to >have slipped thru the cracks. Apparently it has slipped indeed. I'll look into this soon, however since I have no longer a Z1 or the documentation it might require a bit of additional information then (like the full mod sources list). But I'll definitely look into this since it indeed doesn't sound like a big deal. -- Malte Rogacki gacki@... ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out of it." (ARP 2600 Owner's Manual) ----------------------------------------------------------------------------

>3.05 seems to work just fine on my Mac system. Well, that's a good thing. >I can't see that I have gained anything though. There are >supposed to be some updates to the Triton adapation, but other >than that, it seems like a long wait for nothing. This may be true for your specific situation, but we got a much larger number of new modules and adaptations with 3.05. Of course, if one doesn't own those modules it's a bit pointless indeed... >Everything scanned fine and seems to be working fine. Again my >only complaint is with needing more of my equipment supported. > >Boss GT-6 : If the GT-5 was worth doing, why not this much >improved model? I don't know, maybe it's the generally inferior SysEx implementation in many Boss devices? Apart from that, why don't you give it a try creating an adaptation yourself? >Korg Karma: Well, enough has been said about being only OS 1 >- that is kinda pointless. The Karma module was written by Korg directly. I agree that having a module for the "old" OS version is a bit pointless. Maybe this will change. >Would like to see in OS X beta soon as I start to convert my >studio over. Still think that some kind of "adaption wizard" that >could help users a little more setting up there own equipment >would be great. On some gear, I don't need full editing in SD, if I >could just use it as a librarian to give patches a description and >load and save them, it would be awesome. But that has been part of SoundDiver since the beginning. Just download the Programming manual from the web site and you can go ahead creating adaptations. It's really not that hard. Is there really just the GT-6 and the Karma OS-2 missing for you or do you have other devices in mind, too? -- Malte Rogacki gacki@... ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out of it." (ARP 2600 Owner's Manual) ----------------------------------------------------------------------------

> But that has been part of SoundDiver since the beginning. Just download the > Programming manual from the web site and you can go ahead creating > adaptations. It's really not that hard. Well, I have tried that. While I do programming in my job, and understand midi farily well, I didnt get very far. The manual is for an earlier version of SD and the examples given are so different than what I am trying to configure that it didn't help much. Maybe I am just missing something. If you want to give me a hand or point me in the right direction, that would be great. I would really love to be able to put these together myself. I asked Michael if he thought it would only take some tweaking to convert the GT-5 to GT-6 and he thought it would not work - seemed like that would have been a good place to "jump in"

--- In sounddiver-users@yahoogroups.com, "Edo_Koto <edfenner@a...>" <edfenner@a...> wrote: [snip] > Well, I have tried that. While I do programming in my job, and > understand midi farily well, I didnt get very far. The manual is for > an earlier version of SD and the examples given are so different > than what I am trying to configure that it didn't help much. Maybe I > am just missing something. I agree. The programming manual is showing its age now. An updated version would be nice, such as an index for start. I am constantly jumping thru the manual, looking for something I saw somewhere. Greetings, Bert Keizer.