> Is there already an adaption availeble for the Novation A-Station, > or can i aspect it in the near future? Just searching the archives... Has anyone made an A-Station adaptation yet? Graham

At 10:36 -0500 27.12.01, juvenal wrote: >I'm confused, and I can't find any setting in SoundDiver to adjust or set. >Each modules port and channel settings are correct and have been checked and >double checked. Last week I was using it to make D-110 patches, this week >it's playing the TX81Z when I try to audition the patches. Did you check the "Preserve Thru Port/Ch"? It must be unchecked in order to get MIDI Thru rerouted. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 01:57 +0000 23.12.01, phoenixgtr wrote: >Does that mean there isn't going to be an editor for the GP-100??? Never say never... -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 11:00 +0000 29.12.01, mikuma909 wrote: >i try to use Sounddiver 3.0.4 and Logic 4.8.1 together on my Mac, >but it dosen´t work. I can´t edit my synths and my AMT 8 Midi >Interface hangs up. I must restart my Computer. How to >configurate ? >Any Tips ? Mac or Windows? Did you enable "Use AutoLink"? -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 16:18 +0000 29.12.01, xaviermiller wrote: >BTW would it be possible to add support for "native" .PCG files >(Trinity and Triton) ? I could help you (I've the specs). We already have implemented this. Please wait until 3.0.5 is available. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 09:39 +0000 23.12.01, David Tobin wrote: >Sound Diver Crashed, logic crashed, and I spent 2 hours with disk warrior >and Norton before I could make the computer restart properly. What caused them to crash? -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 11:49 +0100 23.12.01, Kai-Steffen Schlink wrote: >is any support for the Yamaha DX200 and the Yamaha AN200 planned? Currently not. Requests were almost zero. >Will the existing DX module and the An1x adaption work with these modules? Probably not. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 08:43 -0600 23.12.01, David L. Vessell wrote: >Is there a module available for the Ensoniq ESQ-1? There is an adaptation for the SQ-80, ESQ-1 and ESQ-M. >How about the Ensoniq >Mirage? It is currently not supported. You are the first who asks. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 00:20 +0000 25.12.01, joransol wrote: >Is it possible for each instrument (Lets say Korg Trinity on ch1) in >LAMP to retrieve whatever sound I have in my library as long as it is >a trinity sound ofcourse(asumed I have over 600 combis/programs for >trinity in my current opened library)? ie, does LAMP have access to >all trinity sounds in my SD-library via autolink? No, only on the patches currently in the device's memory. > >I have tried the following: >I audition a trinity sound from my current library in Sounddiver. I >send it to my trinity. LAMP changes the patch to A005 or >the "instrument name". I choose to save the library with the Logic >song. I get a .lib file with my library. So far everything is ok. >But, when I reopen the song, LAMP loads the library. But the patch >A005 is not the one I saved in my library. It is the one currently in >Sounddivers "version" of my Trinitys bank memory. I thought there was >a relation between LAMP patches and SD Library. Yes, but only if Logic already used program changes in the instruments. To achieve this with a patch in a library, first drag-and-drop it to a memory location in the device window, then set the program change accordingly in Logic's instrument. "Save Library for Logic Song" should now save this patch in the library belongig to the song. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 16:59 +0000 28.12.01, kirkxyz wrote: >I just got a Unitor8/AMT8 combo and installed the MME driver and >Unitor 3.0 Control program...and I unchecked the box in Control Panel >Unitor8 - Settings "Enable Port 0 (send to all)" 'cause the manual >said to do so (I think, it is after all 2:00 am)... > >But the 3.0 Control program hangs when booting and says: > >Device Unitor 8 is assigned to Midi Port "Unitor Out 0 (all)" which >no longer exists. Please set this device to another port. > >and the AMT8 keeps flashing all its green lights throughout... > >So I now avoid these problems by going back in to Control Panel >Settings and checking that box... > >but then upon booting the Control Program, it recognizes the Unitor8 >but then hangs forever (hourglass leading to blue death screen) right >after as if it is trying unsuccessfully to recognize the AMT8 (yes >the AMT8 is connected properly -many times over- to the Unitor8 by >the 422 cable 'cause the computer goes serial into the Unitor8) Which operating system do you use, and which version of the MME driver? Serial or USB? >and the AMT8 midi-in 1's red light never stops flashing - but I ain't >near no keyboard... You mean MIDI In 1 flashes although nothing is connected to In 1? -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 14:24 +0100 25.12.01, lagit zuoil wrote: >my oem version of the sound diver for the doepfer >pocket control don´t works. it don´t recognize the >.lib an .ada files . do you know whats wrong? >happy christmas >greezings lopla The Doepfer OEM version only access adaptation files for Doepfer devices. Libraries should be loaded, but only library entries for Doepfer devices can be transmitted. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 23:55 +0000 25.12.01, toagenius wrote: >Quick Question. I edit the virus patches from within sounddiver. BUT, >i want to be able to change a patch in the virus and have the editor >page in SD update to show those parameters. Is this possiable? I don't know if the Virus has a feature that it transmits the edit buffer contents whenever it changes. If not, you must request it manually in SoundDiver. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 16:02 +0000 28.12.01, qw1209po wrote: >FYI: Bulk Dumps are supported according to the Midi implementation >charts (new updated ones, not in the manual). I tried a bulk all from >the Triton rack within Logic and it seems to work. > >Total time for a complete dump was < 6 minutes, vs... The Korg engineers themselves added bulk dump support in the Triton module. It will be part of SoundDiver 3.0.5. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

At 22:05 -0800 25.12.01, Ivan Vernon McKinney Jr. wrote: >Yes, YOU, the abandoned, the shunned, the owners of the BEST >synth Technics EVER made, but dumped because it wasn't >the "next" DX-7 ($$$$$$$) which it SHOULD have been if >Technics had not SCREWED UP and: I count this as a vote for WSA support in SoundDiver :-) -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

> At 09:39 +0000 23.12.01, David Tobin wrote: >> Sound Diver Crashed, logic crashed, and I spent 2 hours with disk warrior >> and Norton before I could make the computer restart properly. > > What caused them to crash? Trying to startup the newly installed upgrade... David Tobin Wow and Flutter music - Arranging, technology, general wellbeing.....

Can't hardly wait for that :-D > >the Triton rack within Logic and it seems to work. > > > >Total time for a complete dump was < 6 minutes, vs... > > The Korg engineers themselves added bulk dump support in the Triton > module. It will be part of SoundDiver 3.0.5. > -- > > Beste Gruesse - best regards, > > Michael Haydn

Wow... and I was thinking of writing a SD <-> Triton converter; you saved my time :-) --- In sounddiver-users@y..., Michael Haydn <mhaydn@m...> wrote: > At 16:18 +0000 29.12.01, xaviermiller wrote: > >BTW would it be possible to add support for "native" .PCG files > >(Trinity and Triton) ? I could help you (I've the specs). > > We already have implemented this. Please wait until 3.0.5 is available.

Hi everyone, I recently bought a Unitor8 MKII and am trying to set up the click input parameter for it. I want to have the Unitor8 send out a CC Message #117 with a value of 127 but cannot figure out how to get it done. I've tried several things, read the manual, read the online help in Sounddiver and am still having trouble. I use this in order to have my MPC2000XL start the sequencer for live gigs. I don't use a computer with Logic on stage. The MPC2000XL can accept any CC Message to start the sequencer. I use the click input (on the 8Port/SE) with a footpedal to start it. As long as the value for the CC message is over 64 it is supposed to work. Is this possible? If so, how do I set it up? Thanks in advance. fernstudio

Emagic, dont forget to add Line-6 newest amp, the Vetta to Your long and overdue list of upgrades.. Thanks.

Michael, I just would like to thank you for the quick feedback on the Triton issues. I understand you are all in overdrive due to the pending Logic 5 release; that you still find the time to reply so quickly to our requests is both remarkable and most welcome. Thanks and all the best for the new year. I'll try to be patient ;) S

Will the SoundDiver 3.05 Update happen withing the 1st Quater of the new year? Secondly, by any stroke of luck; will there be an adaptation for the Studio Quad 4 in this update? With Fingers Crossed (-: William......

I guess that seems to be the case. Couse i have tried but no luck. Oh well, it would have been a cool feature. chris --- In sounddiver-users@y..., Michael Haydn <mhaydn@m...> wrote: > At 23:55 +0000 25.12.01, toagenius wrote: > >Quick Question. I edit the virus patches from within sounddiver. BUT, > >i want to be able to change a patch in the virus and have the editor > >page in SD update to show those parameters. Is this possiable? > > I don't know if the Virus has a feature that it transmits the edit > buffer contents whenever it changes. If not, you must request it > manually in SoundDiver. > -- > > Beste Gruesse - best regards, > > Michael Haydn > EMAGIC Soft- und Hardware GmbH > SoundDiver Group Executive > Logic Audio Developer > Unitor8 Control Project Manager

Still no Prophet VS users out there? Carl

Dear Michael. I would love a module for the WSA1, though I have a Proteus 2000, (and Yamaha DX7 FDII and Korg M1) the Technics unit still gets the most use. It is a superb unit and I would love to se it supported. Regards David Horne

Hi, I used to run Logic on PC and loved it, but after going to the Mac, I'm using DP3, which came with the computer I bought. There are some things I like about DP3, but enough things I don't like about it, that I'm looking at going back to Logic again. What I can't figure out is exactly how Logic, OMS, and SoundDiver work together to form a functional MIDI system. Can someone please explain this to me? Do I have to use OMS, or does SoundDiver suffice? How does SoundDiver work with OMS? It was all so easy on PC, and with FreeMIDI, DP3 is also simple, but the whole OMS thing is messing with my mind! Any help here greatly appreciated. Thanks, Mark