Hi all, Last week I started with Sounddiver 3.0. So for me the most important thing is to create one huge library with all entries from different devices in it. So after installing all my devices and request all entries per device I tried to build one library by selecting all devices and build the library. After building the library I saw only two devices in the mixed library. So my workaround was select a device, build a library for that device and then insert the different libraries to a new library. Is this a bug in SD 3.0? Another question is that while building a library for a particular device SD is requesting entries again for that particular device while I requested them a few minutes before. What's exactly the difference between a preference file and a library file? After closing SD and starting it again, opening a device, all or some parts of the entries are grayed out, so I have to request them again did I something wrong? Thanks for any replies on this subject. Mark Hofland

Does anyone know if there are plans for modules for these devices? Can I use the Proteus XR module with the Proteus FX? Also, I also have SD POD and SDJV1010, can I just drag their respective libraries into the Libraries folder for SD v3.0? Thanks! Craig Ramseur

Greetings. I have just installed Sounddiver 3.0 for Mac on my G4, and didn't get very far before I had some problems. My setup is: AMT8 Alesis Quadrasynth Plus Piano Mackie d8b (I'm not trying to do anything with it through Sounddiver, but it's there) Emu Pro/cussion Alesis DM Pro Yamaha TG500 Waldorf Microwave XT Lexicon MPX500 Lexicon PCM91 I also use Logic Platinum, but so far I've just tried to get Sounddiver set up on its own, not using Logic. When I did my scan, Sounddiver found the AMT8, the DM Pro and the Microwave XT without problem. On the QSPP, it gave me a message about finding an unidentified QS device and asked me to choose one. However, the choices were Nanobass, Nanopiano and Nanosynth, and mine is none of those, so I chose cancel. It did not find the TG500, Procussion or either Lexicon at all. I did manage to manually install the QSPP and successfully downloaded its contents into Sounddiver. I also manually created a TG500 and Procussion. But I was unable to download the data from either the TG500 or Procussion into Sounddiver. With both, I get a message saying the unit is not responding to Sysex. I've looked at the device IDs, and also fiddled with the pause setting to no avail (and yes, they're set to the proper ports). The devices all work fine within my Logic environments, so I don't think it's cabling or any settings on the AMT8. On the Lexicons, neither unit has a module/adaptation. Do I try to use one that's close (i.e., MPX1 or PCM90) or what? I apologize for the length of the message, but this is my first try with an editor/librarian program. Maybe I'm overlooking something obvious. Any help would be appreciated. Thanks! Irwin

Hi, Is there any way to get version 2.13 to work with a NS5R ? I'm thinking of buying a used copy but there are no drivers for the N synths/modules. I didn't find the relevant updates on Emagic's site. Marc Galipeau ---------------------------------------------------------------------------- -- Join Funcow.com for Free Internet access & e-mail service..... Sign up at http://www.funcow.com

Hi, I've just received SD 3.0 and there's a few things that don't work the way they're supposed to. I'm sure I'm getting something wrong. But the manual doesn't exactly help either. - Autolink: How do I save the patches I am using in a Logic 4.5 song in a SD library? Logic's key command sets the SD button in the task bar off flashing and creates an empty library. That's all! The same happens if I use SD's command (according to the instructions in the manual). - P2k: After requesting everything that's stored in the Proteus the Multis are not displayed, and cannot be edited. What's wrong here? This was possible with SD 2.x and P2k 1.01, even though it crashed the Proteus badly. (My P2k has got firmware version 1.21 now.) - P2k: Is it normal that requesting the unit's memories takes more than 30 minutes? Bloody hell, this would force me to save all entries in SD's prefs, and never to touch the Proteus again!!! Thanks for your help. It's appreciated! Cheers, Recky

On 27 Dec 2000, at 20:45, Recky Reck wrote: > Hi, > > I've just received SD 3.0 and there's a few things that don't work the > way they're supposed to. I'm sure I'm getting something wrong. But the > manual doesn't exactly help either. > > - Autolink: How do I save the patches I am using in a Logic 4.5 song in > a SD library? Logic's key command sets the SD button in the task bar off > flashing and creates an empty library. That's all! The same happens if I > use SD's command (according to the instructions in the manual). > > - P2k: After requesting everything that's stored in the Proteus the > Multis are not displayed, and cannot be edited. What's wrong here? This > was possible with SD 2.x and P2k 1.01, even though it crashed the > Proteus badly. (My P2k has got firmware version 1.21 now.) I don't have SD 3.0 yet, but I know P2k os 1.21 changed the Multi's and f*cked it up. Check SD's web site to see if there's an updated P2k module...They were working on one. > > - P2k: Is it normal that requesting the unit's memories takes more than > 30 minutes? Bloody hell, this would force me to save all entries in SD's > prefs, and never to touch the Proteus again!!! I don't know about 30 minutes, but it DOES take a long time for the P2k. But there's lots there to download... I do it once and try to work form withing Sounddiver to keep everything sync'd. Also, you can just request a single bank or single patch even if you changed it with the fornt panel of the P2k... > > Thanks for your help. It's appreciated! > > Cheers, > > Recky > > > > :-{)> rcaia@... Robin Chard A.I.A., Architect 12015 SW 118th Avenue Tigard, OR 97223-3113 (503) 579-5070

>Hi, > >Is there any way to get version 2.13 to work with a >NS5R ? No. N series support started with 3.0. -- Malte Rogacki gacki@... ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out of it." (ARP 2600 Owner's Manual) ----------------------------------------------------------------------------

Hi all, I'm just in the process of beefing up the VL70-m adaptation. The big number of keyboard scaling parameters which are missing in the original version means that the Instrument editor window is getting *large*... Did anyone else try to complete this adap? Any suggestions? Happy new year to everyone! Ingo

on 12/28/00 9:54 AM, Ingo Debus at debus@... wrote: > Hi all, > > I'm just in the process of beefing up the VL70-m adaptation. The big > number of keyboard scaling parameters which are missing in the original > version means that the Instrument editor window is getting *large*... > Did anyone else try to complete this adap? Any suggestions? > > Happy new year to everyone! > > Ingo > > > > You might ask someone on the Windlist Steve Ginn

Ingo Debus at debus@... wrote: > > I'm just in the process of beefing up the VL70-m adaptation. Go for it, Ingo! Sorry I can't help...

I have troubles with the Studio 4 MIDI communication. I made a test with the nice new feature "Schleifentest" in SD 3 and after the transmission of 1024 Byte the test stops with a message of missing one Byte. I own a Mac B/W 350, OS 9.04 with the Stealth serial port (driver version 1.03) and the Opcode Studio 4. I tried to run the Mac standart extensions with no change. Could it be a problem with Mac OS 9.04 or the Stealth extension 1.03 (1.02 don't work with OS 9.04) ? Thanks for any advice. Have a nice New Year Erich

Hello all, Is anyone out there familiar with how to amend the SD adaptation so that it will work with SNII as a librarian? I believe it works fine with SN I but with the SN II a data request leads to SysEx data being sent but nothing appearing in the Memory Manager (Banks A-H and the Edit Buffer). Thanks & all the best for 2001 M

I'm the author of the original Supernova adaption and I'm sorry to tell you that the SysEx support from Novation is _very_ limited... however, I would imagine that the core command structure is the same. You might try to change the SysEx device ID to the Supernova II and look if the command codes are the same. If this is not the case, then you could as well ditch the adaption and write a new one from scratch :-/ Novation has been promising to release SysEx information since 1998... Maybe my old document ("SysEx codes & structure of the Novation Supernova") can help a little bit. I'll send it to you if you're interested. Cheers, -- Michael 'Mickey' Lauer . . . . . . . . . mickey@... How could anyone know me - when I don't even know myself ?

--- In sounddiver-users@egroups.com, Michael Lauer <mlauer@s...> wrote: > Maybe my old document ("SysEx codes & structure of the Novation > Supernova") can help a little bit. I'll send it to you if > you're interested. > Michael, Thanks for the reply. Yes that would be useful to compare with SNII. Regards Murray Murray_Webster@...

I've created some adaptations, but I am not familiar with the Autolink feature. Is there anything I do to the adaptation for this feature or is it automatic?

I just bought a second hand copy of SoundDiver for the Atari ST, but I'm having problems installing it on my harddisk. Perhaps I'm just confused because of all the disks and manuals and I'm doing something wrong, but I can't figure out what. Basically, the problem is that I can't run it without having to install the original "disk 1" which probably contains the key. This is what I have: *6 Emagic disks marked "Sounddiver v. 1.5e" along with the serial number *6 disks (made by the previous user) with an update to version 1.57e *9 disks (made by myself) with an update to version 2.06e (downloaded from the Emagic FTP site which was directed to me by this list). *1 Mac/Atari ST Soundsurfer manual *1 Mac/Atari ST Sounddiver manual If I'm not completely mistaken, "Soundsurfer" was the original program which only had librarian functions, while it was later replaced by "Sounddiver" which included that AND editor functions, correct? I guess the previous owner had bought "Soundsurfer" first, then upgraded to "Sounddiver" later on. As for installing the program, I get an error message when in the "install" menu (install to harddisk). When selecting "Sounddiver" among all the various modules etc. (after having selected the path for the harddisk) I get the following message: -------------------------------------- You have already installed the program. You will need the master disk to run this copy. [OK] ----------------------------------- What am I doing wrong? I've also tried installing from the 3 various sets of disks, not knowing if I can install the latest version directly, or if I need to update 2 times from the original. Nothing seems to help. Hallvard -- Hyperlink Launchpad: <http://www.crosswinds.net/~hall/> Atari Launchpad : <http://launchpad.atari.org>; Notator/Creator SL : <http://www.crosswinds.net/~notator/> _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

HI , I wann a know is somebody has built an AKAI S-6000 environment yet, or an editor for sounddiver. Thanx in advance yours chris

I have SD for the JV1010, and SD for the Line 6 POD already installed on my computer. I have just bought SD 3.0 How do I incorporate these other libraries into SD 3.0?? Thanks! Craig

While I installed my midi-enviroment with sounddiver 3.0, suddenly my MPX-1 showed trouble: He did´nt start correctly, so I cannot use it anymore. All cables have been set correctly. I tried to get the dates into a multiinstrument of Logic 4.5. Was this the reason? What can I do? Someone got a good working adaption for MPX-1 in Logic/sounddiver? Thanks for help! Ludwig

Hi, This is an automatically generated message. It contains the following paragraphs: 1) Rules 2) Features 3) General info (subscriptions etc) 1. RULES -------------- This is an unmoderated list, so we ask you to respect the "netiquette". Please stick to the following rules: * Use useful subject lines. * No excessive quoting. Cut out parts that aren't relevant to your reply. * No platform wars or other flame wars allowed on this list. Offending language or replies that critisize personals are also not allowed on this list. Subscribers who don't act according to the rules of this list will get banned. * Replies to OT messages should be done in private. If possible, try to post OT messages to the logic-ot mailinglist. * Please try to use these abbreviations in the subject line of your mails as much as possible: ADMIN = Administrative (list-related) messages TIP = Tip (post as many of these as possible) WISH = A Wish, Logic related of course EMAG = A post specifically interesting for the Emagic staff HELP = Help me please! OT = Off Topic (hardware & software related stuff, jokes,...) LAM = Logic Audio Mac LAW = Logic Audio Windows LAB = Logic Audio BeOS 2. FEATURES -------------------- We offer many services. You'll notice some nice advantages of being subscribed to this list once you've been subscribed for a while! Here's a list with the most common features: * User-provided info: this is one of the most informative mailinglists available. * Emagic-provided info: some Emagic people are subscribed and are actively taking part in the discussions. They do so without any obligation, so every mail they send is based on their goodwill. Keep in mind that this is not an official list! It is made BY users FOR users! * You can manage your account: choose between "individual emails" (lots of traffic: up to 100 mails a day!), "daily digests" (= all emails bundled into one big mail) or "no mail/web based only" (= you're still subscribed, so you can still browse through the archives, but you don't receive any emails anymore -> handy when you're going on holiday and don't want an overloaded mailbox: instead of unsubscribing, just switch to "no mail/ web based only" until you're back). * You can browse and search the archives. * You can see info about other users. * We have an online Calendar: you can find the dates of all interesting fairs etc. * Many other things... 3. GENERAL INFO --------------------------- Post message: sounddiver-users@onelist.com Subscribe: sounddiver-users-subscribe@onelist.com Unsubscribe: sounddiver-users-unsubscribe@onelist.com List owner: sounddiver-users-owner@onelist.com Switch between "Individual mails" - "Digests" - "no mail/web based only": http://www.onelist.com/subscribe/sounddiver-users Searchable Archives: http://www.onelist.com/archive/sounddiver-users Online Calendar: http://www.onelist.com/calendar/sounddiver-users General overview of all addresses of Logic related mailinglists: http://www.nbdj.com/Logic/mailinglists.htm Emagic Official Homepage: http://www.emagic.de THE site for everything that's related to Emagic: http://www.logicuser.net Environments: http://www.swiftkick.com/lugec.html Logic Audio FAQ Site - Hardware Info, Troubleshooting, Tips and Tricks: http://www.ozemail.com.au/~oscwilde Thanks, Fokke de Boer & Joeri Vankeirsbilck mailto: sounddiver-users-owner@onelist.com

> From: moskito-tonstudio@... > > While I installed my midi-enviroment with sounddiver 3.0, > suddenly my MPX-1 showed trouble: > He did´nt start correctly, so I cannot use it anymore. > All cables have been set correctly. > I tried to get the dates into a multiinstrument of Logic 4.5. > Was this the reason? What can I do? > Someone got a good working adaption for MPX-1 in Logic/sounddiver? > Thanks for help! > Ludwig Ludwig, I've had this problem a couple of times. For some reason the MPX-1 is susceptible to other manufacturers' sysex data and sometimes ends up getting itself in a mess. There is a solution however: 1. Power on while holding down the "store" button (screen will say "d") 2. Hit edit (screen will change to "0") 3. Turn the dial until it says "2" 4. Hit "store" It will then re-initialise the system software and you'll be back in business (although you may lose your user patches). The adaptation in SD 2.1.3 works fine for me, haven't received 3.0 yet. Good luck Harry.

Charles Simmons <cas@s...> wrote: > For example, there is no way to switch between > KIT mode and PITCHED VOICE mode via Logic / > Autolink. This is important for me, because > I've programmed some RM50 sounds that I like > to play in PITCHED VOICE mode for special drum FX. I set up a little transformer environment for my RM50 in Logic, so in the program change box, when I select bank 0 it selects the preset kits, bank 1 selects the user kits and bank 2 selects the pitched voices, with the actual program number selecting the actual kit/voice. All the MIDI data is there is the manual, so you just use transformer objects to ofset the relevant bank numbers. That's the beauty of Logic - it's easy to set it up to how you want to work. Ben Hall www.benhall.co.uk

Hallvard Tangeraas <northstar2010@y...> wrote: > If I'm not completely mistaken, "Soundsurfer" > was the original program which only had librarian > functions, while it was later replaced by "Sounddiver" > which included that AND editor functions, correct? SoundSurfer was the cheaper librarian only version, SoundDiver was the more expensive librarian + editors version. (There exists only SoundDiver now). > -------------------------------------- > You have already installed the program. > You will need the master disk to run this copy. > [OK] > ----------------------------------- The original owner has either a) lost his authorisations on his computer - this happened to me. I sent the master disks back to Germany and got more authorisations, but within 5 minutes of reinstalling the new authorisation it had been lost again due to an installer bug. I couldn't be bothered to keep sending disks back to Germany so I just leave the SoundDiver master disk in the floppy drive permanently. Or b) he didn't transfer his authorisations from his hard drive back onto the master floppy before selling the program - in effect, he still has a usable copy on his machine. Ben Hall www.benhall.co.uk

hi, i'm trying to make SD 3 learn all the panel from my microwaveXT, while some control such the cutoff work fine, some are totally unusable. Osc 1 when edited from synth panel is displayed from +3 to -3 instead of +4 to -4, correct value are sended if the fader is moved from sounddiver. Osc 1 semitone : doesn't go to positive value, jump from 0 to -12 i didn't checked any after this MicrowaveXT is version 2.33 connected to the AMT8. Thanks

SoundDiver destroyed my Axon NGC-77 too... I had to send it to the factory for a new EPROM. This was many months ago. -M@ -----Original Message----- From: sounddiver-users@egroups.com [mailto:sounddiver-users@egroups.com] Sent: Sunday, December 31, 2000 4:26 AM To: sounddiver-users@egroups.com Subject: [SoundDiver] Digest Number 505 There are 8 messages in this issue. Topics in this digest: 1. Supernova II From: "Murray Webster" <murray_webster@...> 2. Re: Supernova II From: Michael Lauer <mlauer@...> 3. Re: Supernova II From: "Murray Webster" <murray_webster@...> 4. Adaptation Creation and Autolink From: "Micheal Goins" <micheal@...> 5. Problems installing Atari version From: Hallvard Tangeraas <northstar2010@...> 6. AKAI S-6000 From: cpm2000@... 7. SD3.0 and SD POD , SD JV1010 From: "Craig Ramseur" <cram@...> 8. Lexicon MPX-1 destroyed! From: moskito-tonstudio@... ________________________________________________________________________ ________________________________________________________________________ Message: 1 Date: Sat, 30 Dec 2000 13:52:50 -0000 From: "Murray Webster" <murray_webster@...> Subject: Supernova II Hello all, Is anyone out there familiar with how to amend the SD adaptation so that it will work with SNII as a librarian? I believe it works fine with SN I but with the SN II a data request leads to SysEx data being sent but nothing appearing in the Memory Manager (Banks A-H and the Edit Buffer). Thanks & all the best for 2001 M ________________________________________________________________________ ________________________________________________________________________ Message: 2 Date: Sat, 30 Dec 2000 16:37:52 +0100 (CET) From: Michael Lauer <mlauer@...> Subject: Re: Supernova II I'm the author of the original Supernova adaption and I'm sorry to tell you that the SysEx support from Novation is _very_ limited... however, I would imagine that the core command structure is the same. You might try to change the SysEx device ID to the Supernova II and look if the command codes are the same. If this is not the case, then you could as well ditch the adaption and write a new one from scratch :-/ Novation has been promising to release SysEx information since 1998... Maybe my old document ("SysEx codes & structure of the Novation Supernova") can help a little bit. I'll send it to you if you're interested. Cheers, -- Michael 'Mickey' Lauer . . . . . . . . . mickey@... How could anyone know me - when I don't even know myself ? ________________________________________________________________________ ________________________________________________________________________ Message: 3 Date: Sat, 30 Dec 2000 17:28:24 -0000 From: "Murray Webster" <murray_webster@...> Subject: Re: Supernova II --- In sounddiver-users@egroups.com, Michael Lauer <mlauer@s...> wrote: > Maybe my old document ("SysEx codes & structure of the Novation > Supernova") can help a little bit. I'll send it to you if > you're interested. > Michael, Thanks for the reply. Yes that would be useful to compare with SNII. Regards Murray Murray_Webster@... ________________________________________________________________________ ________________________________________________________________________ Message: 4 Date: Sat, 30 Dec 2000 13:48:01 -0500 From: "Micheal Goins" <micheal@...> Subject: Adaptation Creation and Autolink I've created some adaptations, but I am not familiar with the Autolink feature. Is there anything I do to the adaptation for this feature or is it automatic? ________________________________________________________________________ ________________________________________________________________________ Message: 5 Date: Sat, 30 Dec 2000 02:11:48 +0100 From: Hallvard Tangeraas <northstar2010@...> Subject: Problems installing Atari version I just bought a second hand copy of SoundDiver for the Atari ST, but I'm having problems installing it on my harddisk. Perhaps I'm just confused because of all the disks and manuals and I'm doing something wrong, but I can't figure out what. Basically, the problem is that I can't run it without having to install the original "disk 1" which probably contains the key. This is what I have: *6 Emagic disks marked "Sounddiver v. 1.5e" along with the serial number *6 disks (made by the previous user) with an update to version 1.57e *9 disks (made by myself) with an update to version 2.06e (downloaded from the Emagic FTP site which was directed to me by this list). *1 Mac/Atari ST Soundsurfer manual *1 Mac/Atari ST Sounddiver manual If I'm not completely mistaken, "Soundsurfer" was the original program which only had librarian functions, while it was later replaced by "Sounddiver" which included that AND editor functions, correct? I guess the previous owner had bought "Soundsurfer" first, then upgraded to "Sounddiver" later on. As for installing the program, I get an error message when in the "install" menu (install to harddisk). When selecting "Sounddiver" among all the various modules etc. (after having selected the path for the harddisk) I get the following message: -------------------------------------- You have already installed the program. You will need the master disk to run this copy. [OK] ----------------------------------- What am I doing wrong? I've also tried installing from the 3 various sets of disks, not knowing if I can install the latest version directly, or if I need to update 2 times from the original. Nothing seems to help. Hallvard -- Hyperlink Launchpad: <http://www.crosswinds.net/~hall/> Atari Launchpad : <http://launchpad.atari.org>; Notator/Creator SL : <http://www.crosswinds.net/~notator/> _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ________________________________________________________________________ ________________________________________________________________________ Message: 6 Date: Sat, 30 Dec 2000 02:51:11 -0000 From: cpm2000@... Subject: AKAI S-6000 HI , I wann a know is somebody has built an AKAI S-6000 environment yet, or an editor for sounddiver. Thanx in advance yours chris ________________________________________________________________________ ________________________________________________________________________ Message: 7 Date: Sat, 30 Dec 2000 23:18:59 -0000 From: "Craig Ramseur" <cram@...> Subject: SD3.0 and SD POD , SD JV1010 I have SD for the JV1010, and SD for the Line 6 POD already installed on my computer. I have just bought SD 3.0 How do I incorporate these other libraries into SD 3.0?? Thanks! Craig ________________________________________________________________________ ________________________________________________________________________ Message: 8 Date: Sat, 30 Dec 2000 22:56:58 -0000 From: moskito-tonstudio@... Subject: Lexicon MPX-1 destroyed! While I installed my midi-enviroment with sounddiver 3.0, suddenly my MPX-1 showed trouble: He did´nt start correctly, so I cannot use it anymore. All cables have been set correctly. I tried to get the dates into a multiinstrument of Logic 4.5. Was this the reason? What can I do? Someone got a good working adaption for MPX-1 in Logic/sounddiver? Thanks for help! Ludwig ________________________________________________________________________ ________________________________________________________________________