Hi Paul, I'm the author of the Q adaptation. I've tried several times to get the Autolink working, but I have no way of checking as I do not have Logic (no pun intended). I have modified it again as recently as a week ago, to make sure you have the latest. If you like, email me offlist and I can have you check/change a few settings to see if this can get worked out. Oh, and let me know which Q you have. > When I try to get the program names for bank 0 for my multi using Autolink > in Logic get the *multi* names instead of bank 0's program names. When I > try to update from bank 1-3 I get the error "Sorry no program names for > current channel and port". What am I doing wrong? I am also tried the latest > version of the adaptation on www.midicase.com. Editing of sounds appears to > work correctly. > > My current setup > In SD: > ----- > AMT8 talking to Q through Out port: Modem 1 > Input port set to: Modem 1 > Device ID: 0 > Thru Ch: 1 > Preserve Thru port: off > Special Parameters - Multi Program Change Channel: All boxes on > > In Logic: > --------- > Multi Instrument: > Port: Modem 1 > Cha: All > Prg: On 0 0 (depending on channel selected) > For each Sub channel: > Port: Modem 1 > Cha: 1-16 (depending on channel selected) > > In Q: > ----- > Boot: 1.02 > OS: 2.16 > Multimode: On > Controller: Ctl+SysEx > Send Rec: On > Global midi cha: 1 > Multi Cha: 1-16 (matches midi channel) > Multi Status: Midi > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >