At 00:09 +0000 27.12.00, Irwin Shur wrote: >When I did my scan, Sounddiver found the AMT8, the DM Pro and the >Microwave XT without problem. On the QSPP, it gave me a message >about finding an unidentified QS device and asked me to choose one. >However, the choices were Nanobass, Nanopiano and Nanosynth, and mine >is none of those, so I chose cancel. Please send me a protocol of the scan: * Open the MIDI Monitor window (Cmd-8) * Start scanning the QSPP * switch to the MIDI Monitor window (Cmd-8) * copy the shown list (Cmd-C) * start your Emailer * create a reply mail * paste the list (Cmd-V) >It did not find the TG500, Procussion or either Lexicon at all. I >did manage to manually install the QSPP and successfully downloaded >its contents into Sounddiver. I also manually created a TG500 and >Procussion. When scanning them, do they reply at all? If so, please also send me a protocol. >But I was unable to download the data from either the TG500 or >Procussion into Sounddiver. With both, I get a message saying the >unit is not responding to Sysex. I've looked at the device IDs, and >also fiddled with the pause setting to no avail (and yes, they're set >to the proper ports). The devices all work fine within my Logic >environments, so I don't think it's cabling or any settings on the >AMT8. If a device works well with Logic, this says nothing about functionality with SoundDiver. Logic does not require bi-directional cabling or correct SysEx settings. >On the Lexicons, neither unit has a module/adaptation. Do I try to >use one that's close (i.e., MPX1 or PCM90) or what? No, they are not compatible. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Windows Developer Unitor8 Control Project Manager