Thanks Michael I believe it is a control change #1. I am in the "home" setting, so it is just the channel 1 fader. I have the the transmit and rcv channels set on 16 (AMT8 recognizes this automatically). I do have all the rcv parameters enabled because we are going to use Logic to control faders and effect sends, etc. Do you want the Control Change Assignment Table Bulk Dump Format info from the manual append. Peter Fischer Michael Haydn wrote: > At 9:31 -0600 31.08.00, Peter Fischer wrote: > >I'm stumped about this one. While sometimes in SoundDiver and > >especially when I quit the program a MIDI message is sent to the 01v > >that pulls fader one down all the way. I 've looked through the manual > >and frankly don't know what to look for. I'm using the AMT8, a K2500XS, > >and a Mac G3 (beige). Any ideas about what I set that might then cause > >this? > > What messages does the 01v use for the sliders? > > -- > > Beste Gruesse - best regards, > > Michael Haydn > EMAGIC Soft- und Hardware GmbH > SoundDiver Group Executive > Logic Windows Developer > Unitor8 Control Project Manager