Paul Najar wrote: > I can't make comment on that but I can tell you that I use a Ver1 > Unitor 8 via a Stealth Serial Port and all is well here. I suspect > that there are many AMT + 10.4.8 users here so if 10.4.8 were the > real source of this user's issues there would be a whole lot more > responses - or did I miss a thread - quite possible as well... AMT 8 fine here also! Best Regards, Matt Audio - Music - Post Production Web: mattrixx.net - Australia 0416 197 883 Snail Mail: PO Box 10395, Adelaide, South Australia. 5000 iCHATav: mattrixx@mac.com Email: matt@mattrixx.net

At 2:27 PM +1030 11/6/06, Matt McKenzie-Smith wrote: >AMT 8 fine here also! If you can, would you test to see if MIDI clock is received? I can see MIDI clock getting to the device, but no applications can see it. I have played with the Filter Real Time checkbox in the Unitor8 Control application, to no avail. -C -- Chris Muir | "There are many futures and only one status quo. cbm@well.com | This is why conservatives mostly agree, http://www.xfade.com | and radicals always argue." - Brian Eno

Chris Muir wrote: > At 2:27 PM +1030 11/6/06, Matt McKenzie-Smith wrote: >> AMT 8 fine here also! > > If you can, would you test to see if MIDI clock is received? I can see MIDI clock getting to the device, but no applications can see it. I have played with the Filter Real Time checkbox in the Unitor8 Control application, to no avail. > > -C > Well I know for a fact its recieved here. Otherwise none of my synths would be playing nicely and Id have some really cool polyrhythmic techno going on and my vocal delay effects for my other band wouldnt be in tempo either.. So yeah it works.. What do you mean by no applications can see it? -- Chris http://www.monotrematamusic.com http://www.myspace.com/monotremata http://www.descentrecords.com

At 8:34 AM -0800 11/9/06, Chris Coccia wrote: >Well I know for a fact its recieved here. Otherwise none of my synths >would be playing nicely and Id have some really cool polyrhythmic techno >going on and my vocal delay effects for my other band wouldnt be in >tempo either.. So yeah it works.. > >What do you mean by no applications can see it? My Korg Prophecy sends MIDI Clock at the arpeggiator rate. It gets to my Unitor/AMT 8, but neither Logic or Max/MSP can get it. If I use a different MIDI interface, things are fine. -C -- Chris Muir | "There are many futures and only one status quo. cbm@well.com | This is why conservatives mostly agree, http://www.xfade.com | and radicals always argue." - Brian Eno

Chris Muir wrote: > At 8:34 AM -0800 11/9/06, Chris Coccia wrote: >> Well I know for a fact its recieved here. Otherwise none of my synths >> would be playing nicely and Id have some really cool polyrhythmic techno >> going on and my vocal delay effects for my other band wouldnt be in >> tempo either.. So yeah it works.. >> >> What do you mean by no applications can see it? > > My Korg Prophecy sends MIDI Clock at the arpeggiator rate. It gets to my Unitor/AMT 8, but neither Logic or Max/MSP can get it. If I use a different MIDI interface, things are fine. > > -C > Ahh ok so youre not using Logic as the clock source then.. Inside each songs preferences (not from the Apple menu->Preferences but from File->Song Prefs), open up the Synchronization tab and make sure that Logic is set to send clock to the AMT8. I dont think the AMT8 on its own will send it, especially if Logic is involved on one end.. Logic needs to take the incoming stuff and send it back out.. So you have two steps to check, one Logic needs to be set to sync to an external clock source, and two, you need to make sure Logic's sync prefs are set to send it to the AMT8.. On the sync settings page, just select any port on the AMT8 and it will go to them all.. Dont select the ALL option or your clock wont go anywhere. I never could figure that one out, to use my AMT8 along with the built in midi of my MOTU 828MKII, or any other interface I have actually, I have to tell it to send clock to the AMT8 AND use the second drop down menu to send it again to the MOTU specifically. Its never worked if you just select ALL. Makes it a pain for me when I have my full AMT8, drum machine on the MOTU, and Im trying to also sync something with my MIDISport Uno.. Can only use two at once. -- Chris http://www.monotrematamusic.com http://www.myspace.com/monotremata http://www.descentrecords.com