Greetings. I'm new to Logic Pro and to my HDSP 9652 interface. I'm on OSX. Is there anyone with a Mac/RME interface that may be able to help me troubleshoot my signal chain? I have a track running in Logic Pro, but it doesn't get to my ADAT machines. Are there some elemental settings I can check to verify I have my drivers installed correctly? Thanks in advance for your help!

On 03.10.2006, at 20:22, Brian wrote: > Greetings. I'm new to Logic Pro and to my HDSP 9652 interface. I'm > on OSX. > Is there anyone with a Mac/RME interface that may be able to help me > troubleshoot my signal chain? I have a track running in Logic Pro, but > it doesn't get to my ADAT machines. Are there some elemental settings > I can check to verify I have my drivers installed correctly? OSX, Logic Pro, RME Fireface 800 with a Behringer ADA8000 connected via ADAT lightpipe. I did not care about settings or a driver besides telling the Fireface to deal with the ADAT channels. I do not know the HDSP interface but maybe it has a similar setting? ___ Peter Ostry

Thanks for your comments, Peter. Unfortunately, it's not really applicable to this situation. The HDSP 9652 is simply a PCI card with lightpipe inputs - nothing else much to it (there is a breakout cable with midi, but I'm mostly concerned with getting up and running with my ADAT machines) I'll try a few more things, and keep at it. Let me know anybody if you have any suggestions - again, I'm a relatively new user, and it's entirely possible I'm missing some basic thing. Thanks!

If you run the HDSP mixer software that comes with the Hammerfall, you should be able to see the various I/O channels there and whether or not they are receiving audio from Logic. Then you could see if you have Logic set up right to send the audio to the right outputs for whatever it is you're trying to send over ADAT.