Virgil Moorefield wrote: > > From: Virgil Moorefield <morefild@...> > > Hi > > I'm trying to help someone (via email) get LAMP 4.0.7 to talk to > a MOTU Fastlane (2 in/ 2out) USB interface. iMac 333, 8.6 I believe. > It works w/OMS but they want to use Logic drivers. Casio CZ-1 as test device attached. > > I told them: > > -in Environment, get Physical Input and Sequencer Input. Cable "Sum" from PI to SI in. > > -At "do you want to do this" prompt, say ok. > > -make Instrument, set to port USB and Channel 1. Leave uncabled. > > -select Instrument in Arrange window, set to record. > > -be sure your MIDI comm prefs call for internal drivers not OMS. > > That should do it, no? > > TIA for any suggestions/VM > ------------------------------------------------------------------------ > Unsubscribe: mail to logic-users-unsubscribe@onelist.com As far as i know the protocol to talk to usb devices is not standardised : means dat the logic drivers will only talk to logic usb devices The only way is : logic usb, or OMS regards frank