Hi I'm trying to set up Logic/EVB3 for live use on a powerbook. It would seem, that the midi control numbers listed in the manual are incorrect, and quite a few missing functions. I went through all 127 control numbers with each of the 3 midi receive settings on the EVB3, and can't seem to control a lot of essential parameters such as ' perc. on/off' , '2nd/3rd harmonic' , 'tube drive' , 'Leslie acc/dec time' , ' Mic distance' etc. etc. Anybody got any pointers ml. Kim

--- In logic-users@yahoogroups.com, "duminakken" <pianokim@b...> wrote: > Anybody got any pointers Yeah - Logic Control emulation - see my signature... John Pitcairn ------------------------------------------------------------- Logic Control emulation for generic midi controllers: LC Xmu demo: http://www.opuslocus.com/lcxmu/ -------------------------------------------------------------

On 04.04.2004, at 02:52, duminakken wrote: > It would seem, that the midi control numbers listed in the manual are > incorrect, > and quite a few missing functions. > I went through all 127 control numbers with each of the 3 midi receive > settings > on the EVB3, and can't seem to control a lot of essential parameters > such as ' > perc. on/off' , '2nd/3rd harmonic' , 'tube drive' , 'Leslie acc/dec > time' , ' Mic > distance' etc. etc. Quicker than trying control numbers: In the "audio mixer" cable the intrument channel to a monitor-object and move the knobs and faders. The monitor will show you the numbers. I've just installled Logic Pro and see the B3 for the first time but found some numbers you are looking for: perc. on/off: 46 (value 0/1) 2nd/3rd harmonic: 49 (value 0/1) Mic distance: 80 (value 0-100) Peter Ostry

> > I've just installled Logic Pro and see the B3 for the first time but > found some numbers you are looking for: > perc. on/off: 46 (value 0/1) > 2nd/3rd harmonic: 49 (value 0/1) > Mic distance: 80 (value 0-100) > > > Peter Ostry Funny - those don't work in my installation of Logic Pro with the exception of #80 for Mic Distance. That one works when the EV3 is set to the NI mode - but no controller number will do anything with the Percussion. I don't know what could be different in my setup, that would make this not work....... Kim

duminakken wrote: >>I've just installled Logic Pro and see the B3 for the first time but >>found some numbers you are looking for: >>perc. on/off: 46 (value 0/1) >>2nd/3rd harmonic: 49 (value 0/1) >>Mic distance: 80 (value 0-100) >> >> >>Peter Ostry > > > Funny - those don't work in my installation of Logic Pro with the exception of #80 for Mic > Distance. That one works when the EV3 is set to the NI mode - but no controller number > will do anything with the Percussion. > I don't know what could be different in my setup, that would make this not work....... Wild guess, have you tried... perc. on/off: 46 (value 0/***127***) 2nd/3rd harmonic: 49 (value 0/***127***) ?

> > Wild guess, have you tried... > > perc. on/off: 46 (value 0/***127***) > 2nd/3rd harmonic: 49 (value 0/***127***) ? Yeah - i've tried every single controller number with values from 0-127 in all 3 modes, and no luck. I have similar weird problems in the Pro 53, that a few controller don't work. In that one it's the filter section. Wonder what's wrong. Kim

duminakken wrote: >>Wild guess, have you tried... >> >>perc. on/off: 46 (value 0/***127***) >>2nd/3rd harmonic: 49 (value 0/***127***) ? > > Yeah - i've tried every single controller number with > values from 0-127 in all 3 modes, and no luck. I have > similar weird problems in the Pro 53, that a few > controller don't work. In that one it's the filter > section. Wonder what's wrong Wilder guess: are CC46 and CC49 assigned to anything in the Key Commands window?

On 06.04.2004, at 23:16, Bill Canty wrote: > Wilder guess: are CC46 and CC49 assigned to anything in the Key > Commands > window? Or one of them to (activated) automation quick access? Peter Ostry