Hi, I'm using Logic Audio (will be receiving Pro next week) with EXS24MKII and a lot of other stuff. I tried to setup ONE mapped instrument (drumkit) to be linked to MORE THAN ONE EXS24 audio instrument. The cabling is not the problem, but as soon as I assign a key to e.g. cable 2 nothing happens (no sound). I would like to have ONE mapped instrument with e.g. TWO EXS 24 instruments (one for regular drum sounds, one for a set of percussion sounds) and I want to choose the 1st or 2nd instrument from within the mapped instrument using the CABLE column. Please help!!! Bye, Kees Ploeger The Netherlands

On a fine day, 04-03-2004, toetsenman1 wrote: >I'm using Logic Audio (will be receiving Pro next week) with >EXS24MKII and a lot of other stuff. I tried to setup ONE mapped >instrument (drumkit) to be linked to MORE THAN ONE EXS24 audio >instrument. The cabling is not the problem, but as soon as I assign >a key to e.g. cable 2 nothing happens (no sound). I would like to >have ONE mapped instrument with e.g. TWO EXS 24 instruments (one for >regular drum sounds, one for a set of percussion sounds) and I want >to choose the 1st or 2nd instrument from within the mapped >instrument using the CABLE column. Using multiple VSTi's can only be achived through a workaround which is described in FAQ 20.2. Not 100% sure this will work with mapped instruments as well, but it's worth a try. If it doesn't, you're screwed, I'm afraid. -- Hendrik Jan Veenstra h @ k n o w a r e . n l Omega Art: http://www.omega-art.com/