"Haakon Kvidal" <haakokv@...> wrote: >I have just installed a new SCSI harddrive with SCSI ID 14. The ASPI program from Seagate just let me Write Cache Enabl >(WCE turned ON) disks with ID 0 - 6. You should be able to do this using SCSI Explorer in Adaptec's EZSCSI. The other obvious answer is to temporarily swap the SCSI IDs with another disk to enable you to set ID 14 as say ID 6 and enable write cache and then change back. I am assuming you are using the small utility to do this? If you install EZSCSI (now at version 5), do a custom install and just choose SCSI Explorer and any of the other options you may want to use (you probably do not need DOS drivers for example). Hope this helps. Phil Oh, and throw him to the floor sir?...Oh yes thwow him to the floor pleez! Look out the Millennium approaches, pack food and head for the cellar!