f-erenc szabo wrote: > From: zerobeat@... (f-erenc szabo) > > blanc.cyril@... writes: > > I did a few test it seems to work ok with Logic, I will > > do more test later I will keep you inform. > > But what is the best is that PROTOOLS LE would not > > work on my G4/400 (it freeses) > > PT only works on the "old" G4, the one based on the G3 motherboard. > This includes the G4/350, and the original G4/400 (the one which > eventually became the G4/350 when Apple bumped down all the clock > speeds by 50Mhz). In September, Digidesign estimated PT would work > with the newer G4's around February, although I hope that means that > they're simply setting us up for an early surprise in December or > January! I have as you say an "OLD G4" with PCI Video card ! > > > I've heard the Digi001 won't be fully functional with 3rd party > software until Digidesign releases the necessary "developer kit" > (see <www.emagic.de>). For example, S/PDIF doesn't work > with LA right now from what I'm told. > > I also heard today that Digidesign caved in and decided to release > developer support for the Digi001! Apparently, many orders > were cancelled (especially in Europe) when it became more common > knowledge that Digidesign was holding back code. This certainly > was the case locally (customers cancelling orders), so I imagine it > to be true all over the world to some extent. Folks (including us) > didn't even consider that Digidesign wouldn't allow full 3rd party > support for their hardware, since all other Digi hardware is > allowed FULL support. This sells a lot more Digi hardware than if > it were proprietary. I can't imagine what "strategy" Digidesign was > originally thinking. I was confirm of this, this morning by Digidesign France > > > f-erenc > "Fix signs"