> From: RonReitz@... > >I have a 867 DP w/ this card in it running LAMP 6.1 under OS 9.2. The audio >interface is a MOTU 2408 MKII. > >Having so many problems with Logic locking up when moving items between >screens that we've had to resort to turning off the second monitor. Has anyone >else had problems with this? > >Any clues to resolving the problem? I'm about ready to buy a AGP dual >monitor board to replace it. Would like to at least give it one last shot before >doing so. I'd be extremely upset if an AGP board did the same thing. Only thing I could suggest would be the latest version of the drivers 0210 dated Feb 24 2003. http://www.ati.com/support/drivers/mac/macos-october-2002-update.html I use the AGP version on a PC without any problems: Here's some suggestions. Run in 16-bit color (32K colors) If you have a check box for "write combining" (may be PC only), turn it off. If you have a "Fast Write" setting, turn it off as well. Run at a lower refresh rate. Dual monitors uses up PCI bandwidth so the lockup me be the result of a PCI bus error. Perhaps one of the suggestions above will give you more headroom. howard

Hi! Anybody else having redraw problems with a NVIDIA GeForce4MX (in a DP 1GHz Quicksilver)? The text in my environment window is often crippled after scrolling the window. :-/ I´m using the 3.0 driver set. Do the 3.5 drivers (should be installed on MDD Macs) fix the problem? If so, can someone email me the drivers? Apple DP 1GHz Quicksilver 1,5GB RAM MacOS 9.2.2 SBS Bit-3 7-slot PCI expansion chassis PT Mix++, SC-II+ TDM LAPM 6.1.1 Thanx, Peter --- http://www.merlinsound.de

From: RonReitz@... >> Any clues to resolving the problem? I'm about ready to buy a AGP >> dual monitor board to replace it. Would like to at least give it >> one last shot before doing so. I'd be extremely upset if an AGP >> board did the same thing. I would say it is almost impossible to run a PCI dual card on a DAW without hick-ups. It's not enough bandwidth. Running on very low resolutions and/or bit renders the whole point with dual card useless... Get a dual AGP card and your problems should most likely go away...