jump to beginning show previous Showing Logic-users Thread 69696 of 105810 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: Howard Wooten <hwooten@...>
Date: Thu, 1 May 2003 at 12:35:47 AM
Subject: Re: [LAW] MOTU2408MkIII effect send
Message #138250
> From: "Steve Pogson" <stevepogson@...> >Subject: > >Hi, > >I've set up an effect send/return from Logic to an outboard effects unit >(Lexicon MPX1) via 2408MkIII S/PDIF and I get a sort of chorus/phase effect, >presumably because the return signal is delayed in relation to the send. Is >this inevitable - I thought that by using the digital connection this delay >would be avoided. Any thoughts on this would be very much appreciated - at the >moment I cannot use the Lexicon in an effect loop - only by sending the whole Steve, Someone mentioned getting your audio cards latency low. My suggestion centers around setting up the MPX1 so that it's output is only the effected wet signal. Any dry output is going to cause phase problems. This is the same way you set a plugin and a send, mixed 100% wet. Howard
Viewed 192 times, 2 replies, 3 messages in thread. Reply to this message.
From: "Steve Pogson" <stevepogson@...>
Date: Thu, 1 May 2003 at 4:32:50 PM
Subject: Re: [LUG] [LAW] MOTU2408MkIII effect send
Message #138298
This is a reply to #138250.
From: "Howard Wooten" <hwooten@...> > Steve, > Someone mentioned getting your audio cards latency low. > My suggestion centers around setting up the MPX1 so that it's output > is only the effected wet signal. Any dry output is going to cause > phase problems. This is the same way you set a plugin and a send, > mixed 100% wet. Hi Howard, many thanks for your suggestion - right on the button! Steve
Viewed 188 times, 0 replies, 3 messages in thread. Reply to this message.
From: Cyril Blanc <blanc.cyril@...>
Date: Thu, 1 May 2003 at 9:58:22 PM
Subject: Re: [LUG] [LAW] MOTU2408MkIII effect send
Message #138317
This is a reply to #138250.
>> I've set up an effect send/return from Logic to an outboard effects unit >> (Lexicon MPX1) via 2408MkIII S/PDIF and I get a sort of chorus/phase >> effect, presumably because the return signal is delayed in relation to the >> send. Is this inevitable - I thought that by using the digital connection >> this delay would be avoided. Any thoughts on this would be very much >> appreciated - at the moment I cannot use the Lexicon in an effect loop - >> only by sending the whole I do the same with a Lexicon MPX 500 linked to a Voice One (TC-Helicon) using SPDIF on a 2048 MKII, it is working without audible delay ! (the only modification I had to made was in the setup of the Voice-one, (no delay)) Best regards Cyril Blanc France If you want to be sure I read your answer leave my name in it ! Spam mails are directly going to trash
Viewed 199 times, 0 replies, 3 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!


© 1994-2008, All Rights Reserved.