Hello, I'm trying to figure out how to work the Sidechain feature in the ES1 and was wondering if there is a FAQ out there or maybe someone can give me a quickstart on it. I have the Noise Gate and Compressor plugs working fine but can't seem to figure out the ES1. Thanks, Doug Michael

> I'm trying to figure out how to work the Sidechain feature > in the ES1 and was wondering if there is a FAQ out there or > maybe someone can give me a quickstart on it. I have the > Noise Gate and Compressor plugs working fine but can't seem > to figure out the ES1. > Thanks, > Doug Michael 1) In the ES1 window, set the audio track or bus that you want to process as side chain. 2) On the ES1 track, program notes for the rhythm you want to gate the sound after. You have to either mute the audio track or set it to "no output" to hear only the ES1 side chained version. There is a special ES1 preset for audio side chaining. I once uploaded it to the LUG file area. If you can't find it I have it here and can send it over if you mail me privately. Best wishes Per Boysen ________________ www.boysen.se www.looproom.com --> 1st Swedish Looping Festival

--- In logic-users@yahoogroups.com, "dmic27" <dmichael@i...> wrote: > I'm trying to figure out how to work the Sidechain feature in the > ES1 and was wondering if there is a FAQ out there or maybe someone can > give me a quickstart on it. I have the Noise Gate and Compressor > plugs working fine but can't seem to figure out the ES1. If you sidechain, let´s say, the es1 with track 1, that means the level of track 1 will control any parameter from your ES1. The same applies to Es2 and EXS24 It´s nice init? Raul