Hi there, How do I roll-off a certain frequency when eq-ing??? Do I f.e. select a paragraphiq eq, choose let's say 200 hz and pull down the db's in that range??? Is that the way to get rid off unwanted sounds below 200 hz? Thanx, Irving.

> How do I roll-off a certain frequency when eq-ing??? > Do I f.e. select a paragraphiq eq, choose let's say 200 hz and > pull down the db's in that range??? Is that the way to get rid > off unwanted sounds below 200 hz? Hi Irving For what you just described, if you want *only* frequencies below 200 to be reduced, use a high pass filter. However, the term 'roll-off' signifies a *parametric* eq, not a straight filter...but i'm sure many people use it because they heard some audio engineer say it. Do some research on that internet thingy and you will learn....grasshopper sam

Hi there, On Monday, March 3, 2003, at 08:05 PM, <ischenkers@...> wrote: > Hi there, > > How do I roll-off a certain frequency when eq-ing??? > Do I f.e. select a paragraphiq eq, choose let's say 200 hz and pull > down the db's in that range??? Is that the way to get rid off unwanted > sounds below 200 hz? You'll find a fairly good explanation in the manual. Look at Equalizer in the index... with regards, -- Lachlan Deck ldeck@...

i have a song that will not open all of a sudden. is there a way to get the song to open without the plugins and audio drivers so i can copy the tracks to a new song? the only changes to my system since i last opened it are getting rid of my uad-1 card and installing mcdsp analog channel. dont know whats going on but if someone can give me some things to try that would be great. thanks for the help mike v.

On a fine day, 03-03-2003, mvangen wrote: >i have a song that will not open all of a sudden. >is there a way to get the song to open without the plugins and audio drivers >so i can copy the tracks to a new song? > >the only changes to my system since i last opened it are getting rid of my >uad-1 card and installing mcdsp analog channel. >dont know whats going on but if someone can give me some things to try that >would be great. Press... Control (I think) while launching Logic. That will allow you to disable all audio drivers. Maybe that'll help in opening the song. Or you might be able to first launch Logic, then switch off all Audio Drivers, and then try to open the song. -- Hendrik Jan Veenstra <h@...> Omega Art: http://www.omega-art.com

> mike v. Mike, I've had that happen a couple of times. You can open Logic while holding "Control" to disable all audio drivers, and then you can probably open your song. Make sure it doesn't have any plug-ins that you don't have anymore, they might be responsible for the problem. Good luck! David.

> i have a song that will not open all of a sudden. > is there a way to get the song to open without the plugins and audio drivers > so i can copy the tracks to a new song? > > the only changes to my system since i last opened it are getting rid of my > uad-1 card and installing mcdsp analog channel. > dont know whats going on but if someone can give me some things to try that > would be great. > > thanks for the help > mike v. Hold down the Control key as you launch Logic and answer "No" to disable the currently selected audio device. This should let you open the song. hth mallen

> i have a song that will not open all of a sudden. > is there a way to get the song to open without the plugins and audio > drivers > so i can copy the tracks to a new song? > Start logic, go to your audio drivers prefs, turn off the audio engine, and open the sequence.. Thats easy! George -- My home and Logic Tips: http://www.utopiaparkwaymusic.com/ "Reet too tee too tee too tee too tee too teeeeeee" Frank Zappa "All our dreams can come true, if we have the courage to pursue them." - Walt Disney (1901-1966)

Is anything happening? or is the song crashing your LOGIC? Is the song opening but your not hearing anything... Please give me more details and I'lll get back to you. I have had many similar situations like this one before... Jonny