MY SYSTEM: Dual 1gig Mac (1st mirror door series) 768mb RAM running Logic 5.5 on OS 10.2.4. 3 drives: Logic loaded on 80gb system drive; 120gb internal used for back up, 100gb FireWire for audio only. Buffer is set to 128; max recording time from 5 to 7 minutes depending on the tune. Nuendo (RME) Digiset Interface and a Tascam DM24 mixer - all hooked up via Light Pipe cables. The DM24 is set to master. --------------------------- HERE'S MY PROBLEM: While trying to transfer/record 8 tracks of 48k audio into Logic from my ADAT silver face, I get about 3-4 minutes into the tune and get the error message on Logic: "Core Audio: Disk is too slow or system overloaded (-10008)." I tried recording to the 120gb internal instead of the FW drive and got the same error message. I increased my buffer from 128 to 512 - same error. Switching clock to Logic makes my system freak. Any ideas? Armen

On 3/2/03 7:55, "armenjc <armen.c@...>" <armen.c@...> wrote: > I tried recording to the 120gb internal instead of the FW drive and > got the same error message. I increased my buffer from 128 to 512 - > same error. Switching clock to Logic makes my system freak. > Any ideas? Did you check your 120 GB was not fragmented ? Best regards Cyril Blanc France