(repost) Hi! - I get a 2-3 minute stalling (even the ADB mouse freezes) when booting Logic (the window says: "setup memory buffers") and a 1-2 minute stalling while "starting sequencer engine". :-( this seems to be related to my new USB/FW combo card to which the XSKey is attached. I changed back to my older combo card and the stall is gone. Interestingly Logic is the only prog that shows this behaviour... - grouped record arming does not work via the environment, only via arrange - I wish altering settings on multiple-selected audio objects in the environment would be more consistent. e.g.: changing I/O and sends works on multiple selected objects when "Alt" is pressed, group destinations does not. - there should be a group list window where groups can be turned on/off quickly - there should be a "hard-coded" "All"-group - the zoom to fit object command still does not work correctly when zooming on a short region - the visual hilighting is still not correct when Alt-Ctrl-Clicking with the selector (the break-points are set correctly though) - the sample accurate waveform in the arrange is great, but likewise editing resolution would be even better... - I wish freeze would work on TDM/HTDM (EXS)... Oh, a strange thing: I have a screenset with a marker list open. After recording on an audio track the marker list window disappears... I understand that grouping is new... and I appreciate it! LAPM 6.0 MacOS 9.2.2 Mac G3-300MT with Sonnet G4-500 768MB RAM (200MB for Logic 6) PT Mix++ / DAE 5.1.1 onboard ATI / iXmicro UltimateRez graphics USB/FW combo card (agere/Lucent/TI-chipsets stalls, OrangeLink+ with NEC/Hint chipset stalls not) Peter --- http://www.merlinsound.de