>From: Raymund Beyer <ray@...> >Agreed 100%! I also have another wish: I would like to be able to copy a >whole audio setup (mix setting, fx, busses etc.) from one audio platform >(driver) to another. Background: I prepare a lot of my work at home on a >laptop (ASIO driver) and then continue my work in the studio (AW8). So it >would be extremely nice if I could just copy/paste all the channel >setting, FX stuff etc. from one Audio Driver to the one desired. This >would also help to *move* allmost finished mixes (or demos) from one >studio environment to another without having the hassle to rebuild every >channel. Huh! Can't you do this? I mean, at least for certain configurations this defenitely is possible. "Certain" because I can't for example see a 1212 audio configuration on my machine, so maybe for people without an AW8 installed they wouldn't see my settings after a song transfer as well (never tried that...). But well, how about this, works over here (I assume your homemade song uses the PC/AV audio driver): - load in into the studio machine - make sure the PC/AV driver is switched off (I experienced some problems when it was activated) - open the audio configuration window, choose PC/AV from the device menu - choose "copy" - go to the "AW8" entry in the device menu - choose paste - go to the audiomixer, select all audio objects and set them to from "PC" to"AW" - finished As said, I did that some times for testing purposes (EWS64/ASIO vs. AW8/ASIO vs. AW8/native). Allways worked fine. Good luck, Sascha