jump to beginning show previous Showing Logic-users Thread 67129 of 105802 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: Dennis Gunn <dennisg@...>
Date: Tue, 4 Feb 2003 at 12:30:00 AM
Subject: [LAM] Dropouts with MOTU 828 		Message #131843
Running LAMP under sys 9.2.2 on a 533dp Mac I am getting persistent dropouts with my MOTU 828. I have one friend running LAMP under sys 9.2.2 on a dual Gig Mac who reports exactly the same problem. Is this common here? Any solutions?
Viewed 238 times, 3 replies, 4 messages in thread. Reply to this message.
From: Brian Gascoigne <brian@...>
Date: Tue, 4 Feb 2003 at 3:30:00 AM
Subject: Re: [LUG] [LAM] Dropouts with MOTU 828 		Message #131853
This is a reply to #131843.
>Running LAMP under sys 9.2.2 on a 533dp Mac I am getting persistent >dropouts with my MOTU 828. I have one friend running LAMP under sys >9.2.2 on a dual Gig Mac who reports exactly the same problem. Is >this common here? Any solutions? Fine here under 9.2 on an G4 800. Digital sync issue, optical? My 828 is set to internal sync, but it has optical in and outs to my D8B, and I don't use the SPDF in/out. Regards Brian
Viewed 240 times, 0 replies, 4 messages in thread. Reply to this message.
From: "uswitalski@..." <uswitalski@...>
Date: Tue, 4 Feb 2003 at 4:46:22 AM
Subject: Re: [LUG] [LAM] Dropouts with MOTU 828 		Message #131856
This is a reply to #131843.
> Running LAMP under sys 9.2.2 on a 533dp Mac I am getting persistent > dropouts with my MOTU 828. I have one friend running LAMP under sys > 9.2.2 on a dual Gig Mac who reports exactly the same problem. Is > this common here? Any solutions? ... the input LCDs will flicker eventhough nothing is connected and eventually the 828 has to be "rebootet" / repluged. yes, very commen here as well, and i don't like it. u. __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Bis zu 100 MB Speicher bei http://premiummail.yahoo.de
Viewed 194 times, 0 replies, 4 messages in thread. Reply to this message.
From: "gisle martens meyer <gi-meyer@...>" <gi-meyer@...>
Date: Tue, 4 Feb 2003 at 8:02:08 AM
Subject: Re: [LAM] Dropouts with MOTU 828 		Message #131867
This is a reply to #131843.
--- In logic-users@yahoogroups.com, Dennis Gunn <dennisg@a...> wrote: > Running LAMP under sys 9.2.2 on a 533dp Mac I am getting persistent > dropouts with my MOTU 828. I have one friend running LAMP under sys > 9.2.2 on a dual Gig Mac who reports exactly the same problem. Is > this common here? Any solutions? Yes, same system setup except 1 Ghz powerbook. I experience somewhat the same, but usually when CPU usage has been running high for some time. I used to experience this on the PC aswell, with Tascam US428. A typical solution there was to adjust the buffer setting to a higher value, this would reduce the dropouts. I haven't used the 828 and the powerbook long enough to find patterns or look dedicatedly for solutions, as it happens rarely and I haven't started using the combo in live or recording settings yet, where this would be fatal. But yes, the 828 seems at times a bit flaky to me. kind regards, gisle
Viewed 211 times, 0 replies, 4 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

© 1994-2008, All Rights Reserved.