When cursons are set to zoom, they not only do they zoom, they still function as arrow keys, moving from track to track making zooming very unpleasant. LC with LAW 5.5

At 1:31 Uhr +0000 04.02.2003, sootysax <sootysax@...> wrote: >When cursons are set to zoom, they not only do they zoom, they still >function as arrow keys, moving from track to track making zooming >very unpleasant. Hm, the only case I could imagine is when one of the Nudge modes and Zoom are enabled simultaneously. In this case, both modes try to overlay each other on the cursor keys. This is a known problem. If this is not the situation where you encounter the problem, try menu item "Preferences > Control Surfaces > Rebuild Defaults". -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

> At 1:31 Uhr +0000 04.02.2003, sootysax <sootysax@y...> wrote: > >When cursons are set to zoom, they not only do they zoom, they still > >function as arrow keys, moving from track to track making zooming > >very unpleasant. --- In logic-users@yahoogroups.com, Michael Haydn <mhaydn@m...> wrote: > Hm, the only case I could imagine is when one of the Nudge modes and > Zoom are enabled simultaneously. In this case, both modes try to > overlay each other on the cursor keys. This is a known problem. > If this is not the situation where you encounter the problem, try > menu item "Preferences > Control Surfaces > Rebuild Defaults". Michael, Not sure if I was in nudge at the time, but deleting the control and XT from the setup and rebooting logic so it finds them again is a quick fix for the issue. Thanks Scott

At 0:10 Uhr +0000 06.02.2003, sootysax <sootysax@...> wrote: > Not sure if I was in nudge at the time, but deleting the control >and XT from the setup and rebooting logic so it finds them again is a >quick fix for the issue. An even quicker fix would be Preferences > Control Surfaces > Rebuild defaults -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -