Hey All, I am trying to sync LAM on an imac to SX on my PC. Both computers have midiman 2x2s that work fine. Logic goes to -8th measure when I turn on MTC and just scrolls around the smallest beat number in the transport when I start SX but wont leave the -8th measure. I have tried other methods of sync as well and nothing seems to work ( midi clock sends Logic to about 120 bpm more than SX, slaving SX to Logic sort of works but the click are off by about a 16th note with midi clock etc.) Any help on this would be sooo greatly appreciated as this method will allow me to run LAM 6.x and use my PC at the same time. Thanks in advance, Scott

--- In logic-users@yahoogroups.com, "sprawling <s.treibitz@w...>" <s.treibitz@w...> wrote: > Hey All, > > I am trying to sync LAM on an imac to SX on my PC. Both computers > have midiman 2x2s that work fine. Logic goes to -8th measure when I > turn on MTC and just scrolls around the smallest beat number in the > transport when I start SX but wont leave the -8th measure. I have > tried other methods of sync as well and nothing seems to work ( midi > clock sends Logic to about 120 bpm more than SX, slaving SX to Logic > sort of works but the click are off by about a 16th note with midi > clock etc.) > > Any help on this would be sooo greatly appreciated as this method > will allow me to run LAM 6.x and use my PC at the same time. > > Thanks in advance, > > Scott P.S. I forgot in my first post to mention this is 5.5 with osX 10.2.3 and I turned on all the sync stuff in the little osX midi utility Thanks again