OK so I own a SunSyn and I love it. Good for me. :-/ It has one set of Single patches numbered 0-255 and one set of multipatches 0-255. What I can't figure out is how to get Logic to select patches higher than #127. I looked through the Logic manual and the SunSyn manual seems to indicate that bank change messages are standard #30(?) I tried the method outlined in the Logic manual for monitoring the midi out of the SunSyn during patch changes but they seem to just repeat after 127. Is it a transform thing? I don't know that I fully understand the custom bank select options based on what I read from the manual. Thanks in advance -- slick Mac 1GHz DP/MPC2000/DX11/SunSyn/K5m/PC1600 Logic 5.5/Reaktor/FM7/RME Multiface