Right then... I'm in the process of making a controller for my logic/scope setup... The controller is based on the designs of Thorsten Klose and his MBHP modules (www.uCapps.de). I want to have a transport section, including using a rotary encoder to act as a scrubb dial which will control the SPL. Here is what the current firmware allows for MIDI implementation for the encoders: o min/max values for encoders o Sending absolute values: xx xx [from min to max] o Sending relative events: xx xx 40 +/- speed o Sending relative events: xx xx 00 +/- speed o Sending relative events: xx xx 40 +/- 1 o Sending relative events: xx xx 00 +/- 1 o Sending relative CC events: CC Inc/Dec xx o Meta Events allow you to define SysEx strings and more I hooked up a midi data viewer app to see msgs are sent when u control the SPL (ff, rw, play, stop etc) it seems to send out various system msgs - 1 to tell where the SPL is, if it's stop, play etc... My Q is how do i go about setting up control of the SPL, i'm guessing it's gonna involve some enviro action if it's possible at all... Any knowledge on this one is appreciated... Rspx... D //

At 15:42 Uhr +0000 01.12.2002, Muted wrote: >My Q is how do i go about setting up control of the SPL, i'm guessing it's >gonna involve some enviro action if it's possible at all... No; there are key commands which can also be toggled by MIDI events. The Contour Shuttle Pro by http://www.contouravs.com generates key commands when you turn the shuttle wheel. It comes with a Logic Preferences file (included in http://www.contouravs.com/cav_os8_9_update_settings.html) -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -