From: "Mauri Hall" <hey_mavis@...> >"Error while trying to synronize audio and MIDI. Sample Rate >(varies) recognized. Check conflict between Logic 5 and external >device." > >I have just installed logic 5.01 onto my PC (running Windows XP). >and I cannot get it to play more than two bars without getting this >message, even when there areno audio regions or audio instruments in >the arrange window. I do not have any external devices, and the >sound card is built into the board. Why 5.01? This error often shows up when trying to run Logic on a cheap motherboard soundcard with piss poor drivers. Start by turning of any of the "auto" selections in the synchronization window/setup and/or try changing sample rates. 44.1 to 48 or vice-versa. I think cracked versions of the software my also give this or a similar message. (no accusations, just posting what I've heard) h howard

> This error often shows up when trying to run Logic on a cheap motherboard > soundcard with piss poor drivers. Start by turning of any of the "auto" > selections in the synchronization window/setup and/or try changing sample > rates. 44.1 to 48 or vice-versa. > > I think cracked versions of the software my also give this or a similar > message. (no accusations, just posting what I've heard) > > h > > howard Hi, this error also occurs on very expensive G4 MAC DualProcessor machines. I fight with this error since I own the G4 and didn't find out by now the reason for the problem. I have a MOTU 2408 connected to a Mackie D8B and an external WordClock Master from Mutec. I don't think that the wordclockmaster is the problem because all the other devices work just fine. Only Logic 5.3 suddenly comes up with the errormessage and audio slows down to a various sampelrate. regards flo

> > This error often shows up when trying to run Logic on a cheap motherboard > > soundcard with piss poor drivers. Start by turning of any of the "auto" > > selections in the synchronization window/setup and/or try changing sample > > rates. 44.1 to 48 or vice-versa. > > > > I think cracked versions of the software my also give this or a similar > > message. (no accusations, just posting what I've heard) > > > > h > > > > howard From: "florianenders" <ekprod@...> > Hi, > this error also occurs on very expensive G4 MAC DualProcessor > machines. I fight with this error since I own the G4 and didn't find > out by now the reason for the problem. > I have a MOTU 2408 connected to a Mackie D8B and an external > WordClock Master from Mutec. I don't think that the wordclockmaster > is the problem because all the other devices work just fine. Only > Logic 5.3 suddenly comes up with the errormessage and audio slows > down to a various sampelrate. > > regards > flo Hi Florian, yes true, I have those problems with my Logic 5.3 for Win too What drivers are you using? Asio? Look to the I/O streams in the Asio driver page in the Audio configuration of Logic. If they are set to "max" try to reduce that. The problem was already sent to emagic. They didn't know that. I guess it is something, what is wrong in Logic.This whole Midi / Audio sync error thing is strange. Somebody else wrote here or in another list, that it has something to do with a not proper installed windows, but since you have this problem on Mac too it seems to be a general Logic Problem. Keep me informed please, cause it is a warranty problem best jr

> Why 5.01? > > This error often shows up when trying to run Logic on a cheap motherboard > soundcard with piss poor drivers. Start by turning of any of the "auto" > selections in the synchronization window/setup and/or try changing sample > rates. 44.1 to 48 or vice-versa. > > I think cracked versions of the software my also give this or a similar > message. (no accusations, just posting what I've heard) Sorry to say it's a logic bug. This bug made me change to SX (though I like logic). I have an old system (Asus P2B with Pulsar1 LAWP4.8) and tried lots of optimisations. SX runs (so far) without problems... If there wasn't this bug, I might swich back. Regads, Gunnar

> > > This error often shows up when trying to run Logic on a cheap motherboard > > > soundcard with piss poor drivers. Start by turning of any of the "auto" > > > selections in the synchronization window/setup and/or try changing sample > > > rates. 44.1 to 48 or vice-versa. > > > > > > I think cracked versions of the software my also give this or a similar > > > message. (no accusations, just posting what I've heard) > > > > > > h > > > > > > howard From: "florianenders" <ekprod@a...> > > Hi, > > this error also occurs on very expensive G4 MAC DualProcessor > > machines. I fight with this error since I own the G4 and didn't find > > out by now the reason for the problem. > > I have a MOTU 2408 connected to a Mackie D8B and an external > > WordClock Master from Mutec. I don't think that the wordclockmaster > > is the problem because all the other devices work just fine. Only > > Logic 5.3 suddenly comes up with the errormessage and audio slows > > down to a various sampelrate. "nefertiti" <nefertiti@s...> wrote: > Hi Florian, > yes true, I have those problems with my Logic 5.3 for Win too > What drivers are you using? Asio? > Look to the I/O streams in the Asio driver page in the Audio configuration > of Logic. If they are set to "max" try to reduce that. The problem was > already sent to emagic. They didn't know that. I guess it is something, what > is wrong in Logic.This whole Midi / Audio sync error thing is strange. > Somebody else wrote here or in another list, that it has something to do > with a not proper installed windows, but since you have this problem on Mac > too it seems to be a general Logic Problem. > Keep me informed please, cause it is a warranty problem > best jr I am having the same problems I am trying to transfer from 3 x DA88s via MOTU 2408, I can get them across say twice but then the third time the time remaining clock slows down and the files truncate backwards. I have spoken to MOTU who say it is software, E magic who say it is Hardware, Tascam are on the case as well and if someone can come up with the answer I would be delighted. One thing though it also does it on 4.8 as well One curious thing is it does not seem to happen straight away which in theory it should!!! I am running G4 867DP, 768 Ram, V5.3 Gold, Micro express for sync as well Please help , me and my producer are rapidly going bald!!! Is it a Mac problem?

It happens on the PC too. I have checked EVERYTHING to try to get my UAD-1 to work with my 1010's and as soon as I plug in a UAD effect the sample rate slows to a crawl...even though both are running at 44.1

[Admin: Excessive re-quoting cut.] From: "madhatmark" <studio@...> > I am having the same problems I am trying to transfer from 3 x DA88s > via MOTU 2408, I can get them across say twice but then the third > time the time remaining clock slows down and the files truncate > backwards. I have spoken to MOTU who say it is software, E magic who > say it is Hardware, Tascam are on the case as well and if someone can > come up with the answer I would be delighted. > One thing though it also does it on 4.8 as well > > One curious thing is it does not seem to happen straight away which > in theory it should!!! > > I am running G4 867DP, 768 Ram, V5.3 Gold, Micro express for sync as > well > > Please help , me and my producer are rapidly going bald!!! > > Is it a Mac problem? Logic 4.8.1 used to do that too me when the word clock was set to spdif but the was no device hooked up to the physical port. This is under win98 _BTW with a lex core 2 Thanks, Bigg John FREE Loops @ www.looplibrary.com

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item‘7695597 ===="You blow in this end of the trombone, and sound comes out the other end and disrupts the cosmos." Roswell Rudd Check out the Pat Hall @ http://www.mp3.com/pathall/

Hi, I just recently switched from the MOTU 828 to the 896 and now whenever I try and load Logic Plat. 5.3 it says "Logic cannot sample rate convert 44100 to 82000 using the selected MOTU ASIO driver, quit Logic and change sample rates using the MOTU contrel panel." If I just click "Ok" and ignore the message, Logic launches and the sample rate that I have set in the MOTU contrel panel works and records audio in that rate. However, one of the new features in 5.3 is being able to "real-time sample rate convert". Like if you wanted to detach a laptop from your interface and just use the MAC AV drivers to mix (which only support 44.1)and then convert back once you reconnect to the interface. It does not do this now! I tried removing my Preferences file for Logic and when I tried loading Logic it said "No MOTU 828 device found". It's as if it was still looking for the 828 I used to have. I'm very confused, and I'm sure I haven't explained it very well either but if anyone has a suggestion please help!! M-De