Please respond to this either through this group or to: jfw713@... G4 / 733MHz 1.2 GB RAM seperate HD for audio Mac OS9.21 / LAP 4.81 no internet or other crap on this computer I just purchased a Nuendo 96/52 with Nuendo 8 i/o 48k box, having switched from (2) MOTU 828 units. I have all the settings correct and am handshaking the card and box with lightpipe and Word Clock BNC cables. I am running this with no console and ran the 828 buffer setting at 96 and/or 128. When I do this with the Nuendo card, it pops frequently during playback and when just monitoring an active input. I changed the buffer settings up to 1024 and it went away. My dealer told me that this is the problem and that I need to raise the buffer settings. This is not the solution and is unacceptable as well as not useable. It worked correctly with the 828's as well as my previous 2408 system at the low (128) buffer setting. Please help. thanks, j Wilkinson jfw713@... (615) 463-8001

"jfwilkinson3" <jfw3@...> wrote: > G4 / 733MHz > 1.2 GB RAM > seperate HD for audio > Mac OS9.21 / LAP 4.81 > no internet or other crap on this computer > > I just purchased a Nuendo 96/52 with Nuendo 8 i/o 48k box, > having switched from (2) MOTU 828 units. I have all the settings > correct and am handshaking the card and box with lightpipe and > Word Clock BNC cables. > > I am running this with no console and ran the 828 buffer setting > at 96 and/or 128. When I do this with the Nuendo card, it pops > frequently during playback and when just monitoring an active > input. > > I changed the buffer settings up to 1024 and it went away. My > dealer told me that this is the problem and that I need to raise > the buffer settings. This is not the solution and is unacceptable > as well as not useable. > > It worked correctly with the 828's as well as my previous 2408 > system at the low (128) buffer setting. > > Please help. > > thanks, > > j Wilkinson > jfw713@... > (615) 463-8001 I use the RME version of the 9652 and it runs fine, with wordclock etc, at the LOWEST available buffer setting so I'm afraid your dealer is wrong. Download the 9652 manual from RME's website (http://www.rme-audio.de/english/index.htm) and follow all the insructions for set up with Logic that are in there. Also, make sure that the card is in the bottom slot on the mac, then trash all your RME drivers, re-install them from downloads from the website, zap your PRAM SEVEN TIMES IN A ROW before you try launching logic or the card controls again, and see how you get on. Gareth

> "jfwilkinson3" <jfw3@m...> wrote: > > I just purchased a Nuendo 96/52 with Nuendo 8 i/o 48k box, > > having switched from (2) MOTU 828 units. I have all the settings > > correct and am handshaking the card and box with lightpipe and > > Word Clock BNC cables. Be sure to download the latest drivers from the RME website. Don't use the drivers supplied by Steinberg... ------------- John Pitcairn Got midi fader/knob hardware? Try the Fadermapper demo: http://www.revolver.co.nz/fadermapper/