jump to beginning show previous Showing Logic-users Thread 61416 of 105817 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: "Jeff_Cardoni" <jeff@...>
Date: Mon, 2 Sep 2002 at 9:16:46 AM
Subject: LAM: Serial Midi interfaces on Logic X 		Message #117422
Does anyone know if non-serial midi interfaces are supported yet? I'm running a MOTU Midi Express XT throuth the GeeThree serial port on my Dual 867. Works fine in 9 but I can't find anywhere to setup midi in this new version. I'm not getting any midi in and Logic Control's dead. I'm hoping I just missed something, but I'm thinking it's probably not supported yet. I'm dying to try the new B3 demo. Thanks, Jeff
Viewed 214 times, 1 reply, 6 messages in thread. Reply to this message.
From: Michael Haydn <mhaydn@...>
Date: Mon, 2 Sep 2002 at 9:25:02 AM
Subject: Re: [LUG] LAM: Serial Midi interfaces on Logic X 		Message #117424
This is a reply to #117422.
At 14:16 Uhr +0000 02.09.2002, Jeff_Cardoni wrote: >Does anyone know if non-serial midi interfaces are supported yet? >I'm running a MOTU Midi Express XT throuth the GeeThree serial port >on my Dual 867. Works fine in 9 but I can't find anywhere to setup >midi in this new version. I'm not getting any midi in and Logic >Control's dead. I'm hoping I just missed something, but I'm thinking >it's probably not supported yet. I'm dying to try the new B3 demo. On Mac OS X, every MIDI interface needs a MIDI driver, as all applications access MIDI interfaces via CoreMIDI, a part of OS X. In your case, you would need a driver from MotU. As Mac OS X does not support serial ports (only modems), writing such a driver is currently not possible. -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Viewed 209 times, 2 replies, 6 messages in thread. Reply to this message.
From: "reaverle" <reaver@...>
Date: Tue, 3 Sep 2002 at 7:00:24 AM
Subject: Re: [LUG][LAM] Serial Midi interfaces on Logic X 		Message #117564
This is a reply to #117424.
Michael Haydn <mhaydn@m...> wrote: > At 14:16 Uhr +0000 02.09.2002, Jeff_Cardoni wrote: > >Does anyone know if non-serial midi interfaces are supported yet? > >I'm running a MOTU Midi Express XT throuth the GeeThree serial port > >on my Dual 867. Works fine in 9 but I can't find anywhere to setup > >midi in this new version. I'm not getting any midi in and Logic > >Control's dead. I'm hoping I just missed something, but I'm thinking > >it's probably not supported yet. I'm dying to try the new B3 demo. > > On Mac OS X, every MIDI interface needs a MIDI driver, as all > applications access MIDI interfaces via CoreMIDI, a part of OS X. > In your case, you would need a driver from MotU. As Mac OS X does not > support serial ports (only modems), writing such a driver is > currently not possible. > -- > > Beste Gruesse - best regards, > Michael Haydn Well, I DO have (sort of) midi in exactly the same config but - the only messages that are submitted are c-press messages, not not on/offs. So this, of course, nothing to work with, but at least the stealth serial IS NOT DEAD. Maybe a reason for some hope (or an email to MOTO) Greetings, Henrik
Viewed 202 times, 0 replies, 6 messages in thread. Reply to this message.
From: Dan Chapman <dan@...>
Date: Wed, 4 Sep 2002 at 9:09:25 AM
Subject: Re: [LUG] LAM: Serial Midi interfaces on Logic X 		Message #117732
This is a reply to #117424.
Michael Haydn at mhaydn@... wrote: > In your case, you would need a driver from MotU. As Mac OS X does not > support serial ports (only modems), writing such a driver is > currently not possible. Will I be able to use my Opcode 64xtc hooked up to a Stealthport on OSX? Dan
Viewed 207 times, 2 replies, 6 messages in thread. Reply to this message.
From: Lachlan Deck <ldeck@...>
Date: Wed, 4 Sep 2002 at 9:44:05 AM
Subject: Re: [LUG] LAM: Serial Midi interfaces on Logic X 		Message #117739
This is a reply to #117732.
Hi there, On Thursday, September 5, 2002, at 12:09 AM, Dan Chapman wrote: > Michael Haydn at mhaydn@... wrote: > >> In your case, you would need a driver from MotU. As Mac OS X does not >> support serial ports (only modems), writing such a driver is >> currently not possible. > > Will I be able to use my Opcode 64xtc hooked up to a Stealthport on OSX? Did Michael's response not already answer your question? > Dan with regards, -- Lachlan Deck ldeck@...
Viewed 173 times, 0 replies, 6 messages in thread. Reply to this message.
From: Michael Haydn <mhaydn@...>
Date: Wed, 4 Sep 2002 at 6:05:05 PM
Subject: Re: [LUG] LAM: Serial Midi interfaces on Logic X 		Message #117794
This is a reply to #117732.
At 7:09 Uhr -0700 04.09.2002, Dan Chapman wrote: >Will I be able to use my Opcode 64xtc hooked up to a Stealthport on OSX? Same problem. On Mac OS X, all hardware (no matter if PCI card, connected to serial, USB, FireWire etc., no matter if it's an audio or MIDI interface or whatever) requires a driver, except it is supported by a standard driver (such as a mouse or keyboard). -- Beste Gruesse - best regards, Michael Haydn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dipl.-Inform. Univ. Michael Haydn mhaydn@... SoundDiver Group Executive http://www.emagic.de/ Logic Developer (Logic Control integration) Emagic Soft- & Hardware GmbH - Germany Phone: +49 4101 495 0 Halstenbeker Weg 96, 25462 Rellingen Fax : +49 4101 495 199 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Viewed 202 times, 0 replies, 6 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

© 1994-2008, All Rights Reserved.