Stephen Bennett wrote: > > From: "Stephen Bennett" <s.bennett@...> > > From: Jack Heitzer <jheitzer@...> >> Thanks, but could you first remove the "CPU too slow" messages? > > OK e-magic, just REM it out! > Of course, if you have Pro Tools you dont get the error... DSP to slow On Pulsar running out of DSP's :--) to put some oil on the fire : This is what was stated on Be loud : ========== begin quote from Be -loud Be os audio group ======= Someone asked how many channels a system could handle and wondered was the CPU running out of steam. No, the CPU is by far the fastest part of the system and a modern CPU should have no problem handling over a hundred channels. The problem is the Hard Disc, 32 channels at 24/96 (24bit 96KHz) requires a sustained 16MB a second. A fast new drive on a UDMA 33 or UDMA 66 *might* be able to deliver this but remember seek times between different tracks will cut the sustained data rate. If you want more you'll need a U2-SCSI or U160-SCSI system with multiple fast drives. ========== end quote ========================================== Tought to put some oil on the fire frank sorry had some off moment ..