jump to beginning show previous Showing Logic-users Thread 57617 of 105802 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: Matt McKenzie-Smith <mattrixx@...>
Date: Mon, 3 Jun 2002 at 6:57:03 PM
Subject: Re: [LUG] [LAM] AMT8 Driving me Crazy
Message #108024
Michael Haydn > Check if there are any other USB drivers you don't need, e.g. > Logitech, Iomega etc. > Do you use the cable which comes with the AMT8? Note that USB cables > may be 15 ft long at most. Happy to report, that so far, (24hours) all is well with the new driver!! (This is not a placebo effect is it Michael?) I am using the cable that came with the AMT8. Just a note though. The AMT8 I was supplied with, was in pretty poor condition. The top right rack ear was bent and there was no power supply. My local dealer gave me a PS, but I have to admit being a little suprised that it may have gotten past QC. (Probably happened after, though there was no chipped paint). Cheers =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Matt McKenzie-Smith PO Box 10395 Adelaide BC 5000 South Australia +618(0)82938282 +61(0)416 197 883 mattrixx@...
Viewed 229 times, 1 reply, 2 messages in thread. Reply to this message.
From: Michael Haydn <mhaydn@...>
Date: Tue, 4 Jun 2002 at 1:49:33 AM
Subject: Re: [LUG] [LAM] AMT8 Driving me Crazy
Message #108050
This is a reply to #108024.
At 09:27 +0930 04.06.02, Matt McKenzie-Smith wrote: >I am using the cable that came with the AMT8. Just a note though. The AMT8 I >was supplied with, was in pretty poor condition. The top right rack ear was >bent and there was no power supply. My local dealer gave me a PS, but I have >to admit being a little suprised that it may have gotten past QC. (Probably >happened after, though there was no chipped paint). I don't know your dealer, but to me this means that he sold you a demo or used unit. Our QA is very strict. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Developer (Logic Control integration) Unitor8 Control Project Manager
Viewed 232 times, 0 replies, 2 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!


© 1994-2008, All Rights Reserved.