I am having all sorts of grief with LAMP 5.1.3 and my AMT8. I am getting comm errors and occasionally it is just dropping off the system and I have to turn it off and on again. I have to constantly hit the reset button and it is driving me crazy. I have tried both ports on my DP533 G4 and also the hub I am using for the Keyboard dongle etc. It is no different on any port. Just need the thing to operate normally......pleeez. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Matt McKenzie-Smith PO Box 10395 Adelaide BC 5000 South Australia +618(0)82938282 +61(0)416 197 883 mattrixx@...

On 6/1/02 7:27 PM, "Matt McKenzie-Smith" <mattrixx@...> wrote: > > I am having all sorts of grief with LAMP 5.1.3 and my AMT8. > I am getting comm errors and occasionally it is just dropping off the system > and I have to turn it off and on again. I have to constantly hit the reset > button and it is driving me crazy. > I have tried both ports on my DP533 G4 and also the hub I am using for the > Keyboard dongle etc. It is no different on any port. Just need the thing to > operate normally......pleeez. Yea, I had that - unfortunately I just went out all guns blaring, so I can't be sure what I did exactly that got rid of it for good, but I think that bypassing the hub and running the usb from the extra port on the keyboard helped some, and upgrading my system (or re-installing if you already have it) to OS 9.2 has (fingers crossed) eliminated it. Malcolm ----------------- Malcolm Payne Music NYC http://www.malcolmpayne.com