jump to beginning show previous Showing Logic-users Thread 558 of 105797 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: "Fulvio Pietramala" <mnstudio@xxx.xxx
Date: Tue, 14 Sep 1999 at 4:02:35 AM
Subject: <no subject>
Message #1461
Hi all. I'd need to know the technical reference about VITC Time code. In other words I'd want to know which type of signal VITC is (i.e. a serial modulated or parallel signal or other) and his behaviour. I have to report it to a software programmer who has to syncronize his "earthquake simulating program" (running on a Windows PC and connected to a simulating seismic-board) to an audio-video eatrhquake movie. The video will probably run on a used U-matic gear (because it has separate VITC trasmission at cheap price [any other advice?]) and thru a syncronizer (BTW: which type I could use) will have to reach the PC clock (it has an RS-232 socket) and move the seismic board. Anyone could help me? Thanks Fulvio -- MUSICNET STUDIO di F. Pietramala Via XXV Aprile, 13/A - 57128 Livorno - Italy Logic Audio Platinum 3.7.2 - SoundDiver 2.7 Power Mac 7500/G3/300/1MbCache150 - System MacOs 8.1 144MegRAM - AudioHD Atlas 2Gig - Korg 1212 I/O
Viewed 386 times, 2 replies, 3 messages in thread. Reply to this message.
From: "bogdan" <pauly@xxxxxxxxx.xxxx
Date: Mon, 20 Sep 1999 at 10:42:41 AM
Subject: <no subject>
Message #2186
This is a reply to #1461.
Hi all I'm new to the list so I hope I sent it to the right place.......I am a Logic Platinum Mac G3 400mhz scsi user (new).....I live in San Diego Ca. USA.....What does Audiowerk error 11 system overload mean? Does any one know of any classes in southern Ca.?? The manual is quite hard to understand. Please HELP! Pauly Paul P.S. .....How many tracks is normal on a G3 UW scsi 9gigHD 400mhz with fx on every track???
Viewed 367 times, 0 replies, 3 messages in thread. Reply to this message.
From: Michael Haydn <mhaydn@xxxx.xxxxxx.xxx
Date: Tue, 21 Sep 1999 at 5:12:49 AM
Subject: Re: <no subject>
Message #2308
This is a reply to #1461.
At 10:02 +0100 14.09.99, Fulvio Pietramala wrote: >I'd need to know the technical reference about VITC Time code. In other >words I'd want to know which type of signal VITC is (i.e. a serial modulated >or parallel signal or other) and his behaviour. VITC is one line in the video signal which is not visible on the screen (above the top of the visible lines). There is no standard which line to use, therefore the Unitor8 lets you choose the line (there is also an Auto feature). The line contains a row of black and white spots which display the bits of a SMPTE frame. I don't know the detailed format, there are probably some sync and parity bits. Usually this line is inserted twice in the video signal for backup purpose. Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Project Manager Unitor8 Control Logic Windows Developer
Viewed 355 times, 0 replies, 3 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!


© 1994-2008, All Rights Reserved.