hi there Are there people with a similar setup encountering similar problems out there? I have a Mac G4, Hammerfall 9652 and an external clock generator. In the synchronisation settings -> Audio Window I see a the "Sample rate" which is nearly 10% too slow as long as the Rate is 48000 Hz. With 44.1, all is right. No matter if the Hammerfall uses external or internal clock, BTW. (RME Driver v1.60) Same Problem with my old G3, with Logic 4.8 and Logic 5.0. Now - is it a problem at all? (I had did projects like that and had no strange behaviour except the "rate meter") I'd be very thankful for any ideas there! Best wishes u.

I found this happens with some buffer settings in the asio control panel. Try changeing them and rebooting logic after changing them Best Regards Ben Chase www.core-element.net -----Original Message----- From: hellleutel [mailto:ulireuter@...] Sent: Wednesday, 3 April 2002 6:00 AM To: logic-users@yahoogroups.com Subject: [LUG] [LAM] hammerfall sample rate too slow...? hi there Are there people with a similar setup encountering similar problems out there? I have a Mac G4, Hammerfall 9652 and an external clock generator. In the synchronisation settings -> Audio Window I see a the "Sample rate" which is nearly 10% too slow as long as the Rate is 48000 Hz. With 44.1, all is right. No matter if the Hammerfall uses external or internal clock, BTW. (RME Driver v1.60) Same Problem with my old G3, with Logic 4.8 and Logic 5.0. Now - is it a problem at all? (I had did projects like that and had no strange behaviour except the "rate meter") I'd be very thankful for any ideas there! Best wishes