>i'm newly up and running on a TiBook >500MHz--specifically getting this model >after some online fact finding about the newest >tibooks. > >i'm getting ASIO overload messages after only a couple >plugins (channel >strip) and 3 instances of EXS24 instruments.  (no >audio is running...) > >can someone please explain why this is happening?  >--the CPU isn't even a >1/3 of the way up the meter...  surely it can't be >because of my computer.. >CAN IT?!~ Here's a couple of things to try . . . . 1. Make sure your TCP/IP and Appletalk are set to something *other* than ethernet. 2. Go into Quicktime settings and disable Quicktime Exchange. let us know if that helps at all. best, Jon -- config-- Apple G4 Dual 800, 1.5 gig of ram, Mac OS 9.2.2, RME Hammerfall DSP/ Digiface, MOTU 2408, MOTU MTP AV (USB), Apogee WC Master, Spirit Digital 328 (digital mixer/controller), ATI Radeon AGP, ATI Rage128 (second monitor).

>> i'm getting ASIO overload messages after only a couple >> plugins (channel >> strip) and 3 instances of EXS24 instruments.  (no >> audio is running...) > Here's a couple of things to try . . . . > > 1. Make sure your TCP/IP and Appletalk are set to something *other* than > ethernet. I was under the impression that Appletalk should be disabled altogether when running LAM. Gregory

> i'm stlll experiencing ASIO overload after only a few > softsynths--and this time NO plugins!! > > setup: > g4 Tibook 500MHz w/ (512 MB)-os 9.2.2 -with mercury > firewire elite 80GB HD for samples (EXS24) > mobile 2882 (dsp) > motu midi express > xv-5080 > waldorf micro-q synth > > i've unchecked all reason extensions in ext mgr. no > boxes checked in the "energy" control panel. > > help!! this was supposed to be the most reliable > combination... and i can't get a simple track built... > any help would be greatly appreciated. > > always, > > tv Don't know if you saw this before . .so here it is again. Here's a couple of things to try . . . . 1. Make sure your TCP/IP and Appletalk are set to something *other* than ethernet. 2. Go into Quicktime settings and disable Quicktime Exchange. let us know if that helps at all. best, Jon -- config-- Apple G4 Dual 800, 1.5 gig of ram, Mac OS 9.2.2, RME Hammerfall DSP/ Digiface, MOTU 2408, MOTU MTP AV (USB), Apogee WC Master, Spirit Digital 328 (digital mixer/controller), ATI Radeon AGP, ATI Rage128 (second monitor).

Jonathan Christensen wrote: >>i'm stlll experiencing ASIO overload after only a few >>softsynths--and this time NO plugins!! >>setup: >>g4 Tibook 500MHz w/ (512 MB)-os 9.2.2 -with mercury >>firewire elite 80GB HD for samples (EXS24) >>mobile 2882 (dsp) >>motu midi express >>xv-5080 >>waldorf micro-q synth >> >>i've unchecked all reason extensions in ext mgr. no >>boxes checked in the "energy" control panel. >> >>help!! this was supposed to be the most reliable >>combination... and i can't get a simple track built... >>any help would be greatly appreciated. >Don't know if you saw this before . .so here it is again. >Here's a couple of things to try . . . . >1. Make sure your TCP/IP and Appletalk are set to something *other* than >ethernet. I have it set with ethernet and it's working fine >2. Go into Quicktime settings and disable Quicktime Exchange. same above -- Cyril Blanc ______________________________________________________ mailto:blanc.cyril@... 92350 Plessis Robinson France

What sound board are you using? ----- Original Message ----- >i'm newly up and running on a TiBook >500MHz--specifically getting this model >after some online fact finding about the newest >tibooks. > >i'm getting ASIO overload messages after only a couple >plugins (channel strip) and 3 instances of EXS24 >instruments. (no audio is running...) > >can someone please explain why this is happening? >--the CPU isn't even a 1/3 of the way up the meter... >surely it can't be because of my computer.. >CAN IT?!~