Hi there, > Date: Thu, 01 Nov 2001 16:36:25 -0000 > From: cstarr@... > Subject: LAM: Micrologic-OMS-Yamaha MU90R > > I'm running Micrologic AV on a mac. I have a midisport usb interface. > I run a midi cable out from the midisport to the in on a yamaha MU90R > tone generator. > > I went into OMS set-up and hooked up the MU90R. I can play the logic > tutorial song, but I have to go to each midi track and change "OMS > Unassigned" to "MU90R" from a pull-down. This is in the little field > on the lower left of the arrange window that has the midi channel > number, program number, etc. for each midi track. Currently, it > defaults to "OMS Unassigned." > > I'm wondering if it's possible to default midi tracks to "MU90R." Any > advice? Look up Autoload in the manual. > Also--this might really be pedestrian, as I'm completely new to > logic, digital recording, and midi--can I control all of the MU90R > from Logic? Meaning, can I assign the MU90R Parts, Banks, and > Versions (all Yamaha terms) from Logic, regardless of the mu90r mode > XG, C/M, Etc.)? Sorry, never used Micrologic and so am not sure of its capabilities, but you should be able to control simple things at least like Bank change messages etc (if not in Micro then you could at least record this onto the beginning of a global track in Micro). > > I'm still working through the manuals on this stuff, but I honestly > couldn't find an answer to the first issue. > > Thanks, > Clark > with regards, -- Lachlan Deck ldeck@...