Hi: Have you checked your win.ini file? That's where your midi IN/OUT ports are configured for LAP if your problem is feedback, thats because Hubi or Midiyoke drivers are both for input and output so anything that logic sends to any of those ports returns to logic. You have to config just for input or just for output all these ports. Here is an extract from my win.ini file: [Logic] keyPort=1 MidiIn_AWE64G_MIDI_In__330=0 MidiIn_TTS_Virtual_Piano_In=0 MidiIn_LB1=0 MidiIn_LB2=0 MidiIn_LB3=1 MidiIn_LB4=1 MidiOut_AWE64G_MIDI_Synth__620=0 MidiOut_AWE64G_MIDI_Out__330=0 MidiOut_Creative_Music_Synth__220=1 MidiOut_LB1=1 MidiOut_LB2=1 MidiOut_LB3=0 MidiOut_LB4=0 [SoundDiver] MidiIn_AWE64G_MIDI_In__330=0 MidiIn_TTS_Virtual_Piano_In=0 MidiIn_LB1=0 MidiIn_LB2=0 MidiIn_LB3=1 MidiIn_LB4=1 MidiOut_AWE64G_MIDI_Synth__620=0 MidiOut_AWE64G_MIDI_Out__330=0 MidiOut_Creative_Music_Synth__220=1 MidiOut_LB1=1 MidiOut_LB2=1 MidiOut_LB3=0 MidiOut_LB4=0 Notice how I use LB1-LB2 as output ports and LB3-LB4 as input ports. Good luck! Wolfe Bowers wrote: > From: "Wolfe Bowers" <wolfe@...> > > I've recently switched over to LAWP from Cakewalk Pro Audio .. > I've got everything up and running now, except for one thing.. my MIDI > loopback > drivers (Hubi or Midiyoke) don't seem to work properly. I set up > a channel in Logic to use the loopback driver, and my softsynth (SimSynth) > to receive on that channel. If I watch the softsynth's receive, I notice > it doesn't receive any midi information until I press a key on my > controller. > > Unfortunately, after that initial keypress, Logic seems to keep sending > MIDI information to the point where Midiyoke shuts down its port > because of midi feedback. The same set up works fine in Cakewalk, > unfortunately. I don't really know where the feedback is coming from, > there shouldn't be any, and I don't know why Logic is sending more > to the softsynth than just simple note on/off messages. > > Can anyone help? > > Thanks, > wolfe@... __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com