I'm guessing that the dongle always needs to be in one of the 2 usb ports on my tipb g4, but could I run the mt4 from a usb hub? I'd like to get a cheap roland usb audio device for digital out to my ad/da. Can anyone recommend a good usb hub? -Evan _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com

----- Original Message ----- From: "Evan Harmon" <d_a_b_o_m_b@...> > I'm guessing that the dongle always needs to be in one of the 2 usb ports on > my tipb g4, but could I run the mt4 from a usb hub? I'd like to get a cheap > roland usb audio device for digital out to my ad/da. > Can anyone recommend a good usb hub? > -Evan Hi again, Try to use an USB with AC Adaptator or a small on with a Laptop, but again "better try before buy !" Igor

At 12:23 pm -0400 30/6/01, Evan Harmon wrote: >I'm guessing that the dongle always needs to be in one of the 2 usb ports on >my tipb g4, my dongle runs fine on 3 different haubs (1 AC powered, 2 bus-powered) > but could I run the mt4 from a usb hub? mine does G3 Lombard 400( 9.0.4) > I'd like to get a cheap >roland usb audio device for digital out to my ad/da. > >Can anyone recommend a good usb hub? i am using 2 Xircom's (AC powered). sometimes (with my ADSL modem and my USB buslight) i get a message that "a device is drawing too much power - the port has been shut down" so i can't recommend unreservedly. most everything works tho' -- Best Regards, Gareth Jones http://www.garethjones.com

--- In logic-users@y..., "Evan Harmon" <d_a_b_o_m_b@h...> wrote: > I'm guessing that the dongle always needs to be in one of the > 2 usb ports on my tipb g4, but could I run the mt4 from a usb > hub? I'd like to get a cheap roland usb audio device for digital > out to my ad/da. The dongle and MT4 are working just fine for me while attached to a Highlight HU834 4-port hub, in bus-powered or adapter- powered mode. I also have a Griffin iMate attached to the hub, running an ADB keyboard & mouse. Griffin iMic (stop laughing!) is in the other USB port on the PBG4, using the USB-ASIO driver. Works OK, extremely portable, not a real solid audio solution though - I'll be getting either the MOTU 828 or the RME Cardbus/Multiface quite soon. John Pitcairn

At 12:23 -0400 30.06.01, Evan Harmon wrote: >I'm guessing that the dongle always needs to be in one of the 2 usb ports on >my tipb g4, but could I run the mt4 from a usb hub? Sure. The dongle fully complies to the USB standard, so it also supports USB hubs. >I'd like to get a cheap >roland usb audio device for digital out to my ad/da. If you want to connect the audio device to the hub, make sure that the hub supports USB 1.1 and is self-powered. I have all my USB stuff (AMT8, EMI 2|6, Microsoft IntelliMouse, Logic dongle, Logitech QuickCam, Contour jog wheel) connected to a no-name 7 port hub ("USB-2000"), which is connected to my TiBook. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

----- Original Message ----- From: "Michael Haydn" <mhaydn@...> To: <logic-users@yahoogroups.com> Sent: Monday, July 02, 2001 10:16 AM Subject: Re: [LUG] OT: USB hubs with mt4 or dongle? > At 12:23 -0400 30.06.01, Evan Harmon wrote: > >I'm guessing that the dongle always needs to be in one of the 2 usb ports on > >my tipb g4, but could I run the mt4 from a usb hub? > > Sure. The dongle fully complies to the USB standard, so it also > supports USB hubs. > > >I'd like to get a cheap > >roland usb audio device for digital out to my ad/da. > > If you want to connect the audio device to the hub, make sure that > the hub supports USB 1.1 and is self-powered. > > I have all my USB stuff (AMT8, EMI 2|6, Microsoft IntelliMouse, Logic > dongle, Logitech QuickCam, Contour jog wheel) connected to a no-name > 7 port hub ("USB-2000"), which is connected to my TiBook. > -- > > Beste Gruesse - best regards, > > Michael Haydn > EMAGIC Soft- und Hardware GmbH > SoundDiver Group Executive > Logic Audio Developer > Unitor8 Control Project Manager > > Unsubscribe: mail to logic-users-unsubscribe@yahoogroups.com > > >>>>> Subject lines must contain: [LAM]/[LAW]/[GEN]/[OT] <<<<< > > FAQ: http://members.ozemail.com.au/~oscwilde/ > FAQ: http://www.logicuser.net > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >

http://www.contourdesign.com/shuttlepro_info.htm wish it was PC compatible .. . *grmph* > > I have all my USB stuff (AMT8, EMI 2|6, Microsoft IntelliMouse, Logic > > dongle, Logitech QuickCam, Contour jog wheel) connected to a no-name > > 7 port hub ("USB-2000"), which is connected to my TiBook.

>http://www.contourdesign.com/shuttlepro_info.htm > >wish it was PC compatible .. . *grmph* > >> > I have all my USB stuff (AMT8, EMI 2|6, Microsoft IntelliMouse, Logic >> > dongle, Logitech QuickCam, Contour jog wheel) connected to a no-name > > > 7 port hub ("USB-2000"), which is connected to my TiBook. > Haa... I just asked a week ago if any Logic user is using that to get a feeling how it works with Logic :-) Cheers -- Check out the web page for my band: Now solo works also: New home address : http://koti.welho.com/jpennane

----- Original Message ----- From: "Jorma Pennanen" <jorma.pennanen@...> > >http://www.contourdesign.com/shuttlepro_info.htm > > > >wish it was PC compatible .. . *grmph* > > > >> > I have all my USB stuff (AMT8, EMI 2|6, Microsoft IntelliMouse, Logic > >> > dongle, Logitech QuickCam, Contour jog wheel) connected to a no-name > > > > 7 port hub ("USB-2000"), which is connected to my TiBook. > > > Haa... I just asked a week ago if any Logic user is using that to > get a feeling how it works with Logic :-) > Cheers I t looks Great ;o)) I'm gonna buy one ! and it seems that thee is a Special Environment for it ! ( probably done by M. Haydn... ) Igor

At 17:17 +0200 02.07.01, yael wrote: >I'm gonna buy one ! and it seems that thee is a Special Environment for it ! >( probably done by M. Haydn... ) No, Contour Design did it. Thanks anyway :-) -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

Thoughts from the mind of Marcus Barczak, 7/2/01: >http://www.contourdesign.com/shuttlepro_info.htm > >wish it was PC compatible .. . *grmph* <grin> Looks like a "tres k3wl" product indeed. But what is not clear from their info page is: is this thing meant as an add-on extra-13-buttons next to your mouse, or does it replace the mouse completely? Anyone? cheers, HJ -- Hendrik Jan Veenstra email: mailto:h@... www: http://www.ision.nl/users/h/index.html

> Looks like a "tres k3wl" product indeed. But what is not clear from > their info page is: is this thing meant as an add-on extra-13-buttons > next to your mouse, or does it replace the mouse completely? Anyone? > > > cheers, > HJ the Extra 13 buttons it's the F1 to F13 buttons on the mac... Can be usefull too ;o) It's not a Mouse, it's a remote, u will have to keep a Mouse ( pity !) Igor

Hi, we found this one .... Igor

At 11:58 Uhr +0200 03.07.2001, yael wrote: >the Extra 13 buttons it's the F1 to F13 buttons on the mac... >Can be usefull too ;o) No, these buttons are freely assignable, either they can simulate keyboard key presses or launch applications etc. -- Beste Gruesse - best regards, Michael Haydn EMAGIC Soft- und Hardware GmbH SoundDiver Group Executive Logic Audio Developer Unitor8 Control Project Manager

----- Original Message ----- From: "Hendrik Jan Veenstra" <h@...> To: <logic-users@yahoogroups.com> Sent: Tuesday, July 03, 2001 10:32 AM Subject: RE: [LUG] [OT] What is "Contour Jog" M.Haydn ?? > Thoughts from the mind of Marcus Barczak, 7/2/01: > > >http://www.contourdesign.com/shuttlepro_info.htm > > > >wish it was PC compatible .. . *grmph* > <grin> Hi Marcus , try this one ! http://www.dvdirect.com/shop/product.asp?sku=VID5018#a_bullets Igor