Hi, I don't own any of these apps, but my gues would be that if you have an unemployed lightpipe on the 2408 then you should use that to connect your adat. Then you can use the adat for backups and load your backups easely or use your adat as a independent extra 8 analog out (you'll have to disconnect the adat dig out connnector for that.) or use the adat as an independent 8 analog in. Let the 2408 or if that doesn't work the 01V be the clockmaster. Preferably not the Adat Goodluck Budy > > Next post said that I should hook the: > > Hook the 01V to bank A lightpipe on the 2408 > Hook the ADAT to bank B lightpipe on the 2408 > > Use the 2408's card control panel to route things where you need them. > > Which one of these hook ups would work the best or is there a better way to go. > > thanks > Alexander >