jump to beginning show previous Showing Logic-users Thread 18504 of 105721 show next jump to end

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

From: Dana Kelley <dkma@...>
Date: Sun, 2 Apr 2000 at 1:23:00 PM
Subject: logic's vst tape delay 		Message #21663
setup - LAMP. MAC, AW8 Was working on a song yesterday, and I have 3 tape delays on 3 different busses. each bus is being fed a maximum of 2 sends. When I first open the song, none of the delays are synched to tempo. The times are all off. I then remove each delay, , and re select the tape delays/settings again (saved the settings of each bus). Nowe the timeing is fine. Is anyone having the same problem? Is this a bug I've missed? Thanks -- Dana Kelley DKMA Productions dkma@... http://home.earthlink.net/~dkma
Viewed 264 times, 3 replies, 5 messages in thread. Reply to this message.
From: Raymund Beyer <brainray@...>
Date: Mon, 3 Apr 2000 at 2:59:04 AM
Subject: Re: [LUG] logic's vst tape delay 		Message #21699
This is a reply to #21663.
Dana Kelley <dkma@... > wrote: >setup - LAMP. MAC, AW8 >Was working on a song yesterday, and I have 3 tape delays on 3 different >busses. each bus is being fed a maximum of 2 sends. When I first openthe >song, none of the delays are synched to tempo. The times are all off. I >then remove each delay, , and re select the tape delays/settings again >(saved the settings of each bus). Nowe the timeing is fine. Is anyone >having the same problem? Is this a bug I've missed? On my studio Mac I _never_ got the timing delay (BPM) to work! I tried with several OS versions, LAMP versions etc. but it doesn´t work on this specific machine... The strange thing is that on my Powerbook it allways works... Ray ----------------------------------------------------------- Raymund Beyer |_ ray@... http://www.brainstorm-music.de |_ H1, 1-2 ICQ: 17201606 |_ 68159 Mannheim Fon +49 (0) 621 6858000 |_ Germany -----------------------------------------------------------
Viewed 245 times, 0 replies, 5 messages in thread. Reply to this message.
From: Normand Jones <norjones@...>
Date: Sun, 2 Apr 2000 at 4:02:50 PM
Subject: Re: [LUG] logic's vst tape delay 		Message #21734
This is a reply to #21663.
Dana On the tune I'm working on now the lead vocal trk has a tape delay on it which at one point I've automated the feedback. some times when I'm working on a different part before this effect the feedback settings kind of hang the lead vocal trk even though I've put a reset message at the beginning of the song this happens most of the time when I'm in loop mode; so it might be a bug When song is played from the top it's ok Normand Dana Kelley wrote: > setup - LAMP. MAC, AW8 > Was working on a song yesterday, and I have 3 tape delays on 3 different > busses. each bus is being fed a maximum of 2 sends. When I first open the > song, none of the delays are synched to tempo. The times are all off. I > then remove each delay, , and re select the tape delays/settings again > (saved the settings of each bus). Nowe the timeing is fine. Is anyone > having the same problem? Is this a bug I've missed? > > Thanks > -- > Dana Kelley > DKMA Productions > dkma@... > http://home.earthlink.net/~dkma
Viewed 216 times, 1 reply, 5 messages in thread. Reply to this message.
From: Sascha Renner <monocyt@...>
Date: Tue, 4 Apr 2000 at 2:45:12 PM
Subject: How to increase SPDIF-Level of 1212 ? 		Message #21842
This is a reply to #21734.
Before I become crazy, I ask the list: How can I increase the Level of my SPDIF Signals? I use the KORG 1212 Card and go out via SPDIF to my TC Fireworx, and back again to the Card with SPDIF but the Signal are in the end far too low. Also the Output of the TC Fireworx is at maximum level. Any suggestions? Thanx sas
Viewed 224 times, 0 replies, 5 messages in thread. Reply to this message.
From: Dana Kelley <dkma@...>
Date: Wed, 5 Apr 2000 at 6:25:40 PM
Subject: logic's vst tape delay 		Message #21998
This is a reply to #21663.
setup - LAMP. MAC, AW8 Was working on a song yesterday, and I have 3 tape delays on 3 different busses. each bus is being fed a maximum of 2 sends. When I first open the song, none of the delays are synched to tempo. The times are all off. I then remove each delay, , and re select the tape delays/settings again (saved the settings of each bus). Nowe the timeing is fine. Is anyone having the same problem? Is this a bug I've missed? Thanks -- Dana Kelley DKMA Productions dkma@... http://home.earthlink.net/~dkma
Viewed 207 times, 0 replies, 5 messages in thread. Reply to this message.

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

Forum Index | Read LUG: Policy/Rules Messages Threads Digests | Post New Message | Search!

© 1994-2008, All Rights Reserved.