The fabulous Dr device plug-in has got a x-y control pad on its GUI that looks like the kaoss pad. dragging the mouse sets "x" and "y", mouseclick down/up sets the "z" parameter. Assignment of left x and left y was no problem, i just moved my finger on the kaoss pad and midi learn worked. But z destination is more difficult, apparently - nothing happens at all... How should I set the controller assignment in logic? On the controller assignment window I set "value change" by typing "BD 5C Lo7", below it says "Control Change Ch 14, 92, Lo7". This seems to be correct, touch on/off is CC92 on channel 14 - but it doesn't work... "Value" is: min/max = 0/127 Format = unsigned Multiply = 1 Modus = switch (or toggle? I don't know the correct English translation for all this, just guessing)

> Message posted by Peter Buhr <peter.buhr@arcor.de>: > > The fabulous Dr device plug-in has got a x-y control pad on its GUI that > looks like the kaoss pad. dragging the mouse sets "x" and "y", mouseclick > down/up sets the "z" parameter. > Assignment of left x and left y was no problem, i just moved my finger on > the kaoss pad and midi learn worked. But z destination is more difficult, > apparently - nothing happens at all... > > How should I set the controller assignment in logic? On the controller > assignment window I set "value change" by typing "BD 5C Lo7", below it says > "Control Change Ch 14, 92, Lo7". This seems to be correct, touch on/off is > CC92 on channel 14 - but it doesn't work... > "Value" is: > min/max = 0/127 > Format = unsigned > Multiply = 1 > Modus = switch (or toggle? I don't know the correct English translation for > all this, just guessing) > Actually, any general advice for this would be really helpful - Sculpture also features an x-y area, so it'd be great to learn how you can control these with a Kaoss Pad / PadKontrol etc.