I have a novation xio-synth functioning as an audio interface but I want to use external effects in my mixs. Can I route a signal to an external device with the headphone send, sill monitoring with my main stereo outs and routing the whole thing back into logic for recording without any problems? Thanks

--- In logic-users@yahoogroups.com, "Ali Jamieson" <forums@...> wrote: > Can I route a signal to an external device with the headphone send, > still monitoring with my main stereo outs and routing the whole > thing back into logic for recording without any problems? Only if the headphone output appears as a separate output (3-4 perhaps) in Logic. You may find that the headphone out is simply a parallel output to the main out in the hardware. If it's not a separate out, one trick I used to use was to temporarily monitor in mono - route all the track/bus outputs to a "sum" bus panned hard left; setup your send to a different "external" bus panned hard right, route both bus outputs to output 1-2, monitor using out 1, use out 2 to send to the hardware. John Pitcairn ---------------------------------------------------------------------------- - LC Xmu Logic/Mackie Control emulation & management, LC Xview software LC/MC display, Logic environments & stuff... Opus Locus - http://www.opuslocus.com ---------------------------------------------------------------------------- -