Could someone please help me solve this problem? Michael, are you listening? I'd really like to get my Logic set up correctly after all this time :) Original Question: > >How do I set up LAMP 3.5 and my Opcode Studio 5 LX interface so that > >MIDI clock is transmitted to all Studio 5 ports and therefore ALL my > >MIDI instruments? I am still using OMS. The way things are now, > >Logic MIDI Preferences allows me to select ONLY ONE instrument port > >which will receive MIDI clock. MIDI clock is sent only out this > >port. It's very frustrating having to chose whether I want to use a > >drum machine or a Wavestation, etc! I know the problem is not with > >OMS or with the Studio 5LX as clock has been transmitted out all > >ports without fail using Studio Vision. Please help, I'm getting > >desperate! TIA. > From: Gareth Jones <gj@...> > > At 6:42 pm -0500 17/12/99, Synth Guru wrote: > >I believe I have already done this. I've got my studio setup in OMS and > >have checked off the MIDI clock receive on the units which recognize it. > >Whats next? then Gareth wrote: > >make a PATCH (- a kind of Multi Instrument - read the OMS/Studio5 > >manual) that feeds all the places you want Midi Clock to go to, then > >send Midi Clock to this Patch then I wrote but still havent gotten a response : > Thanks for the advice, Gareth, but - > OK, I read the beginning of and scanned through the rest of the Studio Patches manual and set up a patch with the Studio 5 LX (printer port) as a source, routed through a simple splitter patched to all the individual MIDI devices I've got which receive MIDI clock. I then went into Song Preferences in LAMP 3.5 and selected both MIDI clock and time code destinations to STUDIO PATCHES PROG. I even created a track and selected Studio Patches Prg as the instrument and sent the appropriate program change. Studio 5LX is set to the new studio patch and patches were saved and made current, what have I done wrong? - When Logic song prefs are setup like this, none of the devices in the patch are getting MIDI clock messages. Please help, I'm getting desperate to finally set up my studio the correct way. TIA!