Alain BERTHE <Alain.Berthe1@p...> wrote: > Well, the 1st thing to understand (took me a while too,I want to thank > Peter Ostry for his last post on the subject)) is that a "Multi > Instrument" needs multiple "Aux Out". > So, once you've selected your EXS inst as "Multi" (a drum kit I > bet!!..),go into the Environment (Audio layer) and create as many Aux > Out you need (menu "new"->select Audio Object -> double click it -> go > into its parameter window -> select Cha. to Aux "x"). > You've now built the sub-mixer that the Multi Inst requested. > THEN you can open the EXS's edit window and the big work (pain in the > ass!) can start (if somebody knows a short cut!?). > You'll have to assign each zone to its aux channel. For this,my tip > would be to select (click-shift) first all zones which will go to one > aux,(they will appear open in the below window),so you'll just have to > check the EXS Output check box and assign the correct aux out . > After that,you should be done,you'll just have to set up the new > sub-mixer to your taste. Alain, That's exactly the method I followed after checking with folks here. I set up three Aux objects (kick stays with main out; snare to Aux1, toms to Aux2, and cymbals to Aux3), edited the drumkit to assign the zones/groups to the appropriate EXS outs, and set each Aux's input to the respective EXS out. But no matter what I tried, all the drums still came out of the main outs only. Further research on the web leads to explanations of this method using the EXS24, but no references to the EXSP24 (which I have). Is it possible the EXSP24 doesn't support doing this? Thanks, Arch

Hi Ben sounds like you just need to do a factory reset on the MOTU itself > just check the manual - its quick and easy. Russell

Anyone out there got a handle on logics sync capability.... Im trying to sync logic to a 16ml projector running smpte - using a motu midi express with smpte input from the projector sending mtc to logic and everything starts ok.... but then it always drifts out of time presumably as the projector speed is not constant - though i assumed that as logic is receiving the smpte/mtc and checking it continually it would stay in time with the timecode on the film.......... I am only using the analogue out of the mac at the moment and it has been suggested i needed an audio interface that would enable the sync to change the sample rate of the audio to keep it in time Anyone got any ideas or solutions ?? thanks in advance mick

I am using Logic Express on an iMac 2Ghz, with 2G memory and an Ozonic, Tiger 10.4 I installed iDrum and the updated component file. It now passes the AU validation, but I cannot see the plugin in Logic. Also, for some reason Logic won't allow me to add any new audio tracks. I get a message "No new tracks available." Thanks in advance for any help. Steve

"MICHAEL K" <michaelk_xsx@...> wrote: > Express 7.1 > am wondering where the key commands for 'Split > Audio at SPL' and 'Split by Locators' are? Logic Express menu -> Preferences -> KeyCommands If they're not in there then they're Logic Pro only commands. >Also trying to catch up on whether VST plug-ins are going >to be supported or have been patched? VST is likely never to be supported in anything other than Cubase or Nuendo (both Steinberg products) on OSX. FXPansion sells a wrapper that allows VST to be used in an AudioUnit host application like Logic. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

On 01/09/2005, at 1:34 AM, Art Gillespie wrote: > Once you've split the midi notes, just create a new audio instrument > with another EXSP and the same patch loaded for each drum you want > individual control over. Then just route those split tracks to their > own EXSP instance. > > This is wasteful of RAM, but will work fine. If you mean load the same kit into multiple EXSP instances then it is not wasteful of ram. The EXS is smart enough to not load the same samples several times. Regards ::::::::::::::::::::::::::::::::::::::::::::::::::: Paul Najar Jaminajar Music Production www.jaminajar.com

On 01/09/2005, at 7:21 AM, Steve wrote: > I am using Logic Express on an iMac 2Ghz, with 2G memory and an > Ozonic, Tiger 10.4 > > I installed iDrum and the updated component file. It now passes the > AU validation, but I > cannot see the plugin in Logic. > > Also, for some reason Logic won't allow me to add any new audio > tracks. I get a message "No > new tracks available." To get more tracks you might have to go into the Audio Hardware Driver page and increase the number where it says "Maximum number of audio tracks". As for seeing iDrum are you looking for it in the instrument menu where there is EXS EVP etc listed? Another thought is it's possible to pass AU validation but still not have the box checked in the AU Manager - in which case it would not be available. Check here also. Good luck ::::::::::::::::::::::::::::::::::::::::::::::::::: Paul Najar Jaminajar Music Production www.jaminajar.com

--- In logic-users@yahoogroups.com, "geetar67" <geetar67@y...> wrote: > Alain BERTHE <Alain.Berthe1@p...> wrote: > > > > Well, the 1st thing to understand (took me a while too,I want to thank > > Peter Ostry for his last post on the subject)) is that a "Multi > > Instrument" needs multiple "Aux Out". > > So, once you've selected your EXS inst as "Multi" (a drum kit I > > bet!!..),go into the Environment (Audio layer) and create as many Aux > > Out you need (menu "new"->select Audio Object -> double click it -> go > > into its parameter window -> select Cha. to Aux "x"). > > You've now built the sub-mixer that the Multi Inst requested. > > THEN you can open the EXS's edit window and the big work (pain in the > > ass!) can start (if somebody knows a short cut!?). > > You'll have to assign each zone to its aux channel. For this,my tip > > would be to select (click-shift) first all zones which will go to one > > aux,(they will appear open in the below window),so you'll just have to > > check the EXS Output check box and assign the correct aux out . > > After that,you should be done,you'll just have to set up the new > > sub-mixer to your taste. > > > Alain, > > That's exactly the method I followed after checking with folks here. I > set up three Aux objects (kick stays with main out; snare to Aux1, > toms to Aux2, and cymbals to Aux3), edited the drumkit to assign the > zones/groups to the appropriate EXS outs, and set each Aux's input to > the respective EXS out. But no matter what I tried, all the drums > still came out of the main outs only. > > Further research on the web leads to explanations of this method using > the EXS24, but no references to the EXSP24 (which I have). Is it > possible the EXSP24 doesn't support doing this? > > Thanks, > Arch Here's one previous post that says the EXSP24 isn't capable of multiple outs: http://groups.yahoo.com/group/logic-users/message/184881 Can anyone confirm this?

On Aug 31, 2005, at 3:48 PM, f-erenc szabo wrote: > FXPansion sells a wrapper that allows VST to be used > in an AudioUnit host application like Logic. And keep in mind that they must be OS X VSTs. It won't work with OS9 VSTs. -Steve

On Aug 30, 2005, at 3:59 PM, Mark Falchook wrote: > Is this update like previous ones in that they have you not insert the > key > until AFTER completing the updater? Some people will tell you to not have the key inserted during installation, but it doesn't really matter. If you're superstitious, don't insert the key. -Steve

Paul - It wasn't checked in the AU manager. Thanks so much for the quick reply to the new guy! Steve

Please can you kindly send me a copy of your XV-5080 environment page for reference. Many thanks, Whyman Baker (London - England)

On 2005/09/01, at 1:32, Peter Ostry wrote: > On 31.08.2005, at 17:48, MICHAEL K wrote: >> Also trying to catch up on whether VST plug-ins are going to be >> supported or have been patched? >> > > No more VST today. > Best to buy the VST-AU wrapper from FXpansion ($99), a program which > makes virtually all VST's playable. It is a proven tool. Hi Michael, Remember, the wrapper is good for VST's for OSX only. VST's for OS9 are not compatible. Tatsuo

Kondo Tatsuo <kondo2@...> wrote: > >Remember, the wrapper is good for VST's for OSX only. >VST's for OS9 are not compatible. And it also doesn't work with Windows VSTs. f-erenc szabo, smarty pants Z+E+R+O+B+E+A+T "NOW POWERED BY THE MIRACLE OF THE TRANSISTOR!" <http://home.goodmedia.com/~zerobeat>

> > >> Yes, it could also be that the upgrade paths are > > >> generally more expensive for the academic purchases. > > > > > > Hmm that is something I should have mentioned... > > > My upgrade from 6 to 7 was the same price as usual. > > > I just saw this, think about it, the license are not > the same. What happen between 6 and 7 will not occur > again. you be able to upgrade to LP 8. I don't see > alot of people offering acad upgrades. This is where > Apple can get you. Get an old logic on ebay, its the > way to go. I had an "Academic" 6 and the upgrade path is the same for an academic user as a regular user. There are no "academic" upgrades. You just buy a regular upgrade. The 2 versions are identical except for the initial discount offered to students etc. JP

--- In logic-users@yahoogroups.com, "ezza116" <errol@m...> wrote: > > Hi Doug > > I am using Logic 7.1 on a G5 2.3 running sys 10.4.2 with the Digi 002 Audio interface . > Just looking through your previous postings was wondering if you are still experiencing > any Audio to midi delay which I am finding on my system and did you manage to resolve > this problem.. > > Cheers > > Ezz Ezz, My projects of late continue to be minimal in track count and plug-ins - mostly post- production work. I can't say anything about MIDI delay issues. When I do use MIDI, it's almost always with audio instrument tracks and never with outboard synths. It sounds like you're concerned with external synth performance? Doug Doug

Hi, I only have 2 options in Pref>Global>catch> 1. catch when movin song position 2. allow content catch by position if catch and link are enabled i have unchecked both,but still it catches everytime i replay a loop. any suggestions....?

On 01/09/2005, at 7:07 AM, Whyman Baker wrote: > Please can you kindly send me a copy of your XV-5080 > environment page for reference. Please, me also! I would greatly appreciate it Jeff Edwards

Hi, I only have 2 options in Pref > Global > Catch > 1. catch when moving song position. 2. allow content catch by positiuon, if catch and link are enabled bth have been unchecked...but to no avail...it still catches everytime i play a loop...

Hey... i saw the groove tempate stuff u all where talkin bout and its been a while ive been lookin for that mpc groove.. nice nice.. but the thing is.. when i do the stuff i get the 14 or how much ever different quantizations 2 come up in the quantize section. but if i want it permanently.. wat do i have 2 doi ... so that it cud load everyime logic loads "ANY" song.... i know logic is telling me something bout creating a GROOVES folder on the hard drive.. anyone know more information on this?... and where does this folder has 2 be created.... help please.. KC Precision Productions Trinidad & Tobago

Hi, I recently moved my logic 6.4.1 from my old G4 to a new Powerbook G4. it has been working fine until i wanted to change the metronome settings for recording. -upon clicking on the metronome icon in the transport window the metronome setting window opens and then immediately logic crashes and i get the message 'logic unexpectedly quit' This is a problem i have never had on my old G4. Did not find this problem in he Logic knowledge base. Please advise, since i cannot record properly. Thx Oberon

<quotes trimmed by admin> >That's exactly the method I followed after checking with folks here. I >set up three Aux objects (kick stays with main out; snare to Aux1, >toms to Aux2, and cymbals to Aux3), edited the drumkit to assign the >zones/groups to the appropriate EXS outs, and set each Aux's input to >the respective EXS out. But no matter what I tried, all the drums >still came out of the main outs only. >Further research on the web leads to explanations of this method using >the EXS24, but no references to the EXSP24 (which I have). Is it >possible the EXSP24 doesn't support doing this? Hi Arch, If you can select the output in the edit window,then it's not a EXSP issue. Something I forgot to tell you in my previous post is that you'll have to assign each of your Aux Out to one channel of your multi inst. You do that by clicking on the input button of the aux (just above the output button) and a pop up menu will open. Something else that I find very annoying is that - in the arrange or Mixer windows -,tweaking an Aux out is selecting it, and, selecting an Aux Out is unselecting your EXSP mc,which means that,in those windows,you cannot hear your instrument and adjust the aux at the same time!!! .The only way I found is to first select your inst,then open audio layer of the environment window to access the sub mixer.There,you cannot select or unselect channels but you can tweak the parameters you want. The best then,is to dedicate a screen set for this. Hope those adds will make it... Alain

kc_casey wrote: > but if i want it permanently.. wat do i have 2 doi ... so that it cud > load everyime logic loads "ANY" song.... > > i know logic is telling me something bout creating a GROOVES folder on > the hard drive.. anyone know more information on this?... > and where does this folder has 2 be created.... > help please.. > > KC > Precision Productions > Trinidad & Tobago You should then first copy the folder to your autoload and make your groove template...so all new songs going forward will have the quantizes available. You would then have to do the same to any track you already have going.. Also do not delete the folder from any track unless you do not want the templates available on that song. Mike

On Sep 1, 2005, at 11:19, kc_kasey wrote: > i get the 14 or how much ever different quantizations 2 come up in the > quantize section. > but if i want it permanently.. wat do i have 2 doi ... so that it cud > load everyime logic loads "ANY" song.... Nothing. Groove quantize templates created by the user can not be stored "permanently". To move templates between songs you have to lift over the MIDI region that serves as blueprint for the template. > i know logic is telling me something bout creating a GROOVES folder on > the hard drive.. anyone know more information on this?... Yes. That folder is to store DNA Grooves, not user created Groove Quantize Templates. Greetings from Sweden Per Boysen www.looproom.com (international) www.boysen.se (Swedish) ---> iTunes Music Store (digital) www.cdbaby.com/perboysen

In Audio Preferences what is considered the best set-up in terms of - 1) Memory allocation to Logic 7 application (and how do you change it...it used to be with get info!) 2) Number of Audio tracks (usually use approx 16 ) 3) Buffer size 4) Process Buffer range I have G5 dual 2ghz, Tiger OSX 10.4 with 2.5 GB of RAM Logic 7.01 MOTU 828 Mk II and recently have been getting the message "System Overload - cannot open wave file" or similar error messages. Any help much appreciated. thanks, Paul.