This has been talked about and described many times.. If you are too lazy to search the LUG message base for this on the groups.yahoo.com web page you can always buy the March 2002 issue of Sound on Sound magazine, the Logic Notes section describes exactly how to do this. :-) Jeremy > -----Original Message----- > From: mike vangen [mailto:mikvhsd@...] > Sent: Thursday, February 21, 2002 10:52 PM > To: logic-users@yahoogroups.com > Subject: Re: [LUG] LAW: version 5 - one question, one suggestion > > > does 4 have this live mode? > are you able to record while monitoring effects in 4? > if so how do you set this up or where is it in the manual? > ive played with the live input in wave lab and wished i could > do it in logic > but couldnt figure it out. > > mike v. > ----- Original Message ----- > From: "Oliver Kauert" <oli@...> > To: "Logic-Users" <logic-users@yahoogroups.com> > Sent: Thursday, February 21, 2002 3:14 PM > Subject: [LUG] LAW: version 5 - one question, one suggestion > > > > hi folks, > > > > is it possible to LISTEN to any effects while recording an > audio signal? > > when i want to record some vocals i setup the inserts and > busses for the > > mix in live mode and then everything sounds cool but after > i've pressed > > the "rec" button on the specific audio object the inserts > and bus sends > > are gone and the voice sounds totally dry. i don't like > this behaviour > > because i want to hear the effects even when i'm > recording!!! i DON'T > > want to record the effects but i want to HEAR them during > the recording > > phase. what i can't understand is that the bus sends are > gone when you > > press the "rec" button on an audio object. this should not > be the case. > > is there ANY way to hear the effects then?? if not - emagic PLEASE > > reactivate the busses in rec-mode so that the effects can > be heared ANY > > time!!!