> From: Tom Rice <tomrice@...> > > I use the faders on my ProMix01to control the audio faders in Logic. The > ProMix is cabled directly from the MIDI input to the audio faders, > bypassing the sequencer input altogether. > > This works fine except for when I want to record the fader information. The > problem is that MIDI data seems to be generated and recorded by the virtual > faders only when they are moved by the mouse and not when moved by the > ProMix faders. Is there a way to make the virtual faders generate and > record MIDI data when moved by the ProMix faders? > > One work around would be to route the ProMix faders to the sequencer input, > however it is too easy to inadvertently change the wrong virtual fader, as > the MIDI signal is routed to whichever instrument is selected in the > arrange page regardless of the channel setting. For example, if Audio 1 is > selected in the arrange page and I move ProMix fader 2 which is cabled > directly to Audio 2, both Audio 1 and 2 will move even though Audio 1 is > set to respond to MIDI channel 1. The sequencer input seems to ignore MIDI > channel settings, is there a way around this? Hi Tom, A possible solution is to make a switch, to selectively route the messages to the sequencer or not. Not an ideal solution, agreed, but as far as I know the only one currently. I just updated my extensive ProMix 01 environment to include such a button. Check for screenset 5 in the environment. You can find it at my ftp site: ftp://ftp.creagraphy.nl/pub/Logic_Audio/environments/ProMix01.zip Note that it is LA version 4 compatible. I made it at a Mac, but it should be possible to import it in the PC version too. hth, Ernst. -- If you have a spare moment or two: http://www.creagraphy.com Als U een momentje of twee over heeft: http://www.creagraphy.nl