Gear: Logic 6, Reaktor, M-Audio 18/14 interface. Problem: I am using Reaktor to process audio. I am playing samples from my sampler, running them through effect ensembles/instruments in Reaktor whilst that is in standalone mode and then into Logic to record on an audio track. Problem is its not working. This is the set up i am using to do this. Routing: 1. Sampler outputs into Audio interface inputs 1-2. (In M-audio controller these inputs are routed to outputs 1-2). 2. I have Reaktor in standalone mode and have effect instruments as an ensemble. In the preferences of Reaktor i have inputs 1-2 set to -M audio interface inputs 1-2. I have the Outputs of Reaktor going to m-audio outputs 1-2. I also have the physical cabling/ routing of the effect instrument in the structure window configured like this: ins 1-2 outputs 1-2. So Far then sampler outputs going into interface inputs 1-2. Reaktor Inputs set to audio interface 1-2. Reaktor Outputs set to M-audio interface 1-2. 3. In Logic I have an audio track set to inputs 1-2. When i record arm the signal in this track is the ORIGINAL signal from the sampler WITHOUT the signal/effect processing from Reaktor. WHY?? In the M-Audio interface I have this MIXER configuration : Analogue 1-2 in routed to Output 1-2. Analogue 3-4 in routed to output 1-2. Can anyone suggest a really simple way of acheiving what i am after. To recap: a signal from my sampler> effect processing in Reaktor>Recorded onto audio track in Logic. I know this seems like a complicated explanation but any help would be extremely grateful. Cheers John