> Except now I am completely stuck when it comes to creating faders to control > my prophet VS. It uses what seem like control change messages but 4 for > each parameter. I have to be honest, with standard sysex strings things > were pretty easy, I would just enter the numbers, set the value byte and it > would work, this has me very confused because I know it's not sysex but it's > not standard CC's either. Here is an example of what the manual tells me: > > Bn => Channel Number > 62 => param select LSB > XX => LSB of param (from table in back of manual) This is a static number > > Bn = Channel Number > 63 => param select MSB > XX => MSB of param ---This is static as well > > Bn =Channel Number > 26 => data entry LSB > VAL => this is the parameter value (00-07F) > > Bn =Channel Number > 06 => data entry LSB > VAL => this param is usually only 7 bits wide so the MSB is zero-- (only a > couple parameters are more, 8/10/14 bits) > > anyway one fader needs to send all this info to control one parameter and I > can't for the life of me figure out how to do it, so I am hoping that there > is somebody who can instruct me. Brian, IIRC you need to use sys-ex faders, each containing the 4 CC messages, but before you close the sys-ex fader window leave only the data entry CC(s) selected (the unselected ones won't change value when you move the fader). I haven't studied your question closely, but at first glance it seems that you might need to use the "Filter" parameter in the fader's Parameter Box to set it to 14-bit. HTH, Bill